austenitic
austenitic
1. 0018Ni austenitic aged steel
0018Ni马氏体时效钢
2. 00Cr18Ni14M02Cu2 austenitic stainless steel
00Cr18Ni14M02Cu2奥氏体不锈钢
3. 0Cr18Ni9 austenitic stainless steel
0Cr18Ni9奥氏体不锈钢
4. 1Cr18Ni9Ti austenitic stainless steel
1Cr18Ni9Ti奥氏体不锈钢
5. 1 Cr18Ni9 austenitic stainless steel
1Cr18Ni9奥氏体不锈钢
6. 304L austenitic stainless steel
304L奥氏体不锈钢
7. 304 austenitic stainless steel
304奥氏体不锈钢
8. 316 L austenitic stainless steel
316L奥氏体不锈钢
9. 316 Austenitic Stainless Steel
316不锈钢
10. Keywords austenitic boiler pipe;solid;solution treatment;ASME Code;
ASME规范;奥氏体钢锅炉管;固溶处理;
11. HP40 austenitic heat-resistant steel
HP40奥氏体耐热钢
12. M_s temperature lo-wers linearly with the increase of the austenite strength,while B_s seems indepen-dent of the austenit estrengthening.
M_s 随着奥氏体屈服强度的增加而线性下降,而 B_s 和奥氏体强度之间无任何直接关系。
13. SUS304 meta - stable austenitic stainless strip
SUS304亚稳奥式体不锈钢
14. SUS304 metastable austenitic stainless steel
SUS304亚稳奥氏体不锈钢
15. Hot Deformation Behaviour of a New Austenitic Stainless Steel Containing Ti
一种含Ti奥氏体不锈钢的热变形行为
16. Cavitation erosion behavior of an austenitic stainless steel
一种奥氏体不锈钢的空泡腐蚀行为
17. A Method of Displaying Austenitic Crystallite-Boundary of Hardened Steel
一种显示淬火钢奥氏体晶界的方法
18. MECHANICAL PROPERTIES OF A HIGH MANGANESE AUSTENITIC CRYOGENIC STEEL
一种高锰奥氏体低温钢的力学性能
19. austenitic stainless ste el weldment
不锈钢焊缝
20. The analytic calculations of 10 austenitic matrix casting alloys with different compositions agree with the experimental data of those alloys.
与10种不同成分奥氏体基铸造合金实验数据比较,解析计算与实验结果相吻合。
21. This international standard specifies a micrographic method of determining apparent ferritc or austenitic grain size in steel.
为什么要说是测定铁素体或奥氏体的晶粒度了？？
22. For filling the require in the auto valve produce , to design a late-model cut virguiate material machine aimed at austenitic stainless steel The machine is very advanced and automatic.
为满足汽车气门生产中的实际需要,针对奥氏体不锈钢设计开发一种新型的专用棒料剪切机。该机性能优越,自动化程度高。
23. Mainly used for welding different type of steel and clad steel or similar kind of austenitic steel.
主要用于异种钢或复合钢的焊接或用于焊接相应成分的奥式体钢。
24. On the ordinary ion nitriding and anti-corrosion ion nitriding treatment austenitic stainless steel ball to the basic principles methods and processes,and anti-corrosion ion nitriding advantages.
介绍了普通等离子氮化和离子轰击氮化处理奥氏体不锈钢球体的基本原理、方法和工艺过程,以及离子轰击氮化的特点。
25. Comprehensive Effect of Alloying Elements in Cryogenic Austenitic Steels
低温奥氏体钢中合金元素的综合作用
26. Stacking Fault Energy of Cryogenic Austenitic Steel
低温奥氏体钢的层错能
27. low nickel austenitic stainless steel
低镍奥氏体不锈钢
28. The non-sensitized IGC of austenitic SS may be lightened by using high purity SS.
使用高纯不锈钢可以减轻非敏化态晶间腐蚀。
29. With the help of X-ray diffraction technique,thermal-induced martensite transformation in 304 austenitic stainless steel was investigated.
借助X射线衍射技术,研究了304奥氏体不锈钢热诱发马氏体相变倾向。
30. cold-rolled austenitic stainless steel plates
冷轧奥氏体不锈钢板
31. The technology for tightness improvement of the Ni austenitic cast iron cable head is studied.
分析了提高镍奥氏体铸铁电缆插头铸件致密性的工艺方案。
32. Analyzes the key points of material selection for cryogenic valve,introduces the properties,selecting and processing of austenitic stainless steel.
分析了超低温阀门的选材要点,介绍了奥氏体不锈钢的性能、选用及工艺处理。
33. The author has assayed and expounded the relations between the hot-rolled parameters and the austenitic recrystallization fraction.
分析并阐述了有关热轧参数与奥氏体再结晶分数之间的关系。
34. The susceptibility to intergranular attack(IGA) of austenitic stainless steel were studied by electrochemical potentiokinetic reactivation(EPR).
利用电化学动电位再活化(即EPR)法检测了奥氏体不锈钢晶间腐蚀敏感性的程度。
35. The morphologies of the deformation twins inthe austenitic stainless steel weld metals under dif-ferent materials combinations and welding conditionshave been examined by electron microscopy(EM).
利用电子显微镜对不同材料组合和焊接条件下，奥氏体不锈钢焊缝中形变挛晶的形态进行了观察。
36. Effects of welding parameters on the penetration of austenitic stainless steel A-TIG weld seam with the home-made active flux were carried out.
利用自制的活性剂,考察了焊接工艺参数对奥氏体不锈钢A-TIG焊焊缝熔深的影响。
37. austenitic stainless steel thick plate
厚板奥氏体不锈钢
38. It was discovered that there is a austenitic layer with higher carbon around proeutectoid ferrite and that the distribution of carbon in the austenitic layer is not all continuous and homogene...
发现先共析铁素体周围存在有富碳奥氏体薄层,且此富碳奥氏体薄层中的碳分布并非都是连续的;此一富碳奥氏体薄层的特征与随后转变所形成的珠光体及马氏体形态相关。
39. The structural parameter for austenitic phasetransformation has a great effect on the characteristic of martensitic transformation.
发现奥氏体相变结构参数对马氏体相变特性有很大影响。
40. Meanwhile the process controls effectly the content of residual austenitic,hardenability is raised,and hardness of the cast iron can be reached 59HRC.It not only simplifies the process of ...
同时复合变质处理有效地控制了残留奥氏体量,提高了淬透性,使铸件铸态硬度高达59HRC,不仅简化了热处理工序,而且有利于铸件尺寸稳定和耐磨性能的提高。
41. In the same time, joining mechanismas of mild steel and austenitic stainless steel,mild steel and copper, nickel and tungsten are analyzed.
同时对低碳钢-奥氏体不锈钢、低碳钢-紫铜、镍-钨三种对接接头的连接机理进行了分析，为进一步扩大这一焊接方法的应用奠定了良好基础。
42. nitrogen alloyed austenitic steel
含氮奥氏体钢
43. Ballistic behavior of nitrogen alloyed austenitic and martensitic steel plates
含氮奥氏体钢与马氏体钢的抗弹行为研究
44. Nitrogen alloyed austenitic steels showed excellent ballistic property,higher than that of martensite steel.
含氮奥氏体钢具有优良的抗弹性能,并优于传统马氏体钢的抗弹性能。
45. Austenitic Stainless Steel is a Ni-Cr-Mo stainless steel in the AISI Type 316 category.
在AISI类别316范畴中，奥氏不锈钢是一种镍-铬-钼不锈钢。
46. Thus, from the arrangement of the stacking faults, the HCP martensites or FCC twins could be easily formed in the austenitic grains.
在此由叠差的排列组合的条件下，双晶及HCP的麻田散体于沃斯田体晶粒内的产生而析出应该是容易的。
47. During quenching, the austenitic microstructure transforms into a martensitic one because of rapid cooling (between 50 degrees C/second and 100 degrees C/second).
在淬火过程中，由于急剧冷却（冷却速度可以达到50-100摄氏度/秒），奥氏体转化成马氏体。
48. On the basis of systematical study,the comprehensive effects of alloying elements in cryogenic austenitic steels were analyzed.
在系统研究结果的基础上,分析总结了低温奥氏体钢中合金元素的综合作用。
49. Austenitic Stainless Steel Castings in LWR nuclear power plants are susceptible to thermal aging at operating temperature.
在轻水堆核电站中,奥氏体不锈钢铸件(CASS)在运行温度下长期工作将面临热老化问题。
50. The trawsform on the weld penetration depth are studied after welding the Austenitic steel of activated flux with TIG welding.
在采用TIG焊接方法时,在奥氏体不锈钢的表面涂敷一层活性化焊剂进行焊接,会影响焊缝熔深的变化。
51. Plasma nitriding of AISI316 austenitic stainless steel in the condition of chromium ion immersion.
在铬离子淹没AISI316奥氏体不锈钢的条件下进行离子渗氮,研究了渗层的组织、结构和耐磨性能。
52. Plugs in austenitic stainless steel valves are regularly furnished in this material.
奥氏不锈钢阀门的阀塞通常也采用相同的材料。
53. austenitic Fe-Mn base alloys
奥氏体Fe-Mn基合金
54. the austenitic stainless stell
奥氏体不锈钢
55. Keywords austenitic stainless steel;EPR;intergranular attack;
奥氏体不锈钢;EPR;晶间腐蚀;
56. Weldability Analysis for Austenitic Steel and Ferritic Steel
奥氏体不锈钢与铁素体钢的焊接性能分析研究
57. austenitic stainless steel wires
奥氏体不锈钢丝
58. Austenitic stainless steel heat exchanger
奥氏体不锈钢制再沸器
59. Austenitic stainless steel rotary belt
奥氏体不锈钢回转钢带
60. Study of Solid Solution Nitriding of Austenitic Stainless Steels
奥氏体不锈钢固溶渗氮研究
61. Process innovation of Austenitic stainless steel compound plate welding
奥氏体不锈钢复合钢板焊接工艺改造
62. Study and Application of Austenitic Stainless Steel Glass Line Reactor Kettle
奥氏体不锈钢搪玻璃反应釜的研制和应用
63. austenitic stainless steel electrode
奥氏体不锈钢焊条
64. The Site-weld of the Austenitic Stainless Steel Pipe
奥氏体不锈钢管的现场焊接
65. austenitic stainless steel fiber
奥氏体不锈钢纤维
66. After the homemade welding building of the lead liquid pool of austenitic stainless steel,solution treatment is demanded.
奥氏体不锈钢铅液池进行国产化制作,要求焊接后进行固溶处理,固溶处理后经探伤发现焊缝上有大量的裂纹。
67. Cast austenitic stainless steel
奥氏体不锈钢铸件
68. Supersonic Flow Inspection for High Pressure Tube of Austenitic Stainless Steel
奥氏体不锈钢高压管体的超声波探伤
69. Standard Specification for Austenitic Ductile Iron Castings
奥氏体可锻铸铁铸件
70. Austenitic type stainless steel heat treatment of acid-resistant.
奥氏体型不锈耐酸钢的热处理。
71. Austenitic type is non-magnetic or weak magnetic properties martensite or ferrite is magnetic.
奥氏体型是无磁或弱磁性，马氏体或铁素体是有磁性的。
72. austenitic hot work die steel
奥氏体型热作模具钢
73. austenitic grain-size classification
奥氏体晶粒度分级
74. austenitic grain coarsening tem-perature.
奥氏体晶粒粗化温度：
75. Standard Specification for Austenitic Gray Iron Castings
奥氏体灰口铁铸件
76. Austenitic Hot Working Die Steel
奥氏体热作模具钢
77. A STUDY OF AUSTENITIC HOT WORK DIE STEEL
奥氏体热作模具钢的研究
78. Austenitic phase transformation
奥氏体相变
79. austenitic heat resistant steel
奥氏体耐热钢
80. austenitic heat-resistant steel tube
奥氏体耐热钢管
