axisymmetric
axisymmetric
1. TA Dean,LIU Zhenqing.Analysis of dispersion characteristics of ultrasonic longitudinal axisymmetric guided waves in viscous liquid filled pipes[J].Acta Acustica,2005,30(3):193-200.
[5]他得安,刘镇清.充粘液管材中超声纵向轴对称导波的频散特性分析[J].声学学报,2005,30(3):193-200.
2. ZHU Xiang-rong,DU Qin-wen,WANG Wen-jun.Solutions for axisymmetric problems of nonhomogeneous subgrade on rock[J].Chinese Journal of Geotechnical Engineering,2005,27(4):383-387.
[5]朱向荣,杜秦文,王文军.岩层上非均质弹性地基轴对称问题求解[J].岩土工程学报,2005,27(4):383-387.
3. WANG Tao.Numerical simulation of 3-D integrative viscous complicated flow field around axisymmetric body with ducted propulsion[J].Journal of Ship Mechanics, 2003, 7(2) :21-32.
[7]王涛.轴对称体与导管推进器组合体的三维复杂流场的计算与分析[J].船舶力学,2003,7(2):21-32.
4. The Finite Element Analysis of Axisymmetric Unsteady Heat Conduction Problem
一般轴对称非定常热传导问题的有限元分析
5. The Axisymmetric H 1(R 3) Solution for 3 D Incompressible Euler Equation
三维不可压缩Euler方程的H1(R~3)轴对称解
6. For this reason, a new axisymmetric curved shell element with independent deflection and slope is presented by means of introducing generalized conforming condition int.
为此,通过对现有的轴对称壳体单元的研究,基于加权残值法,将广义协调条件引入剪应变场,构造了一种挠度和转角各自独立的新型轴对称曲壳单元。
7. To predict the settlement of surrounding soils during excavation, axisymmetric model was established in FEM software to analyze the problem by use of FEM based on the Biot's consolidation theory.
为预测基坑开挖及降水过程中周围土体的沉降，本文采用基于比奥固结理论的有限单元法在大型有限元软件中建立轴对称模型进行了分析。
8. The research involves the measurements of the sum of principal stresses in a perspex model, gas temperature fields in 2D and axisymmetric cases, 3D surface shape and 3D displacement field.
主要包括:有机玻璃模型中主应力和的测量,二维气体温度场和轴对称气体温度场的测量,三维物体表面形状和三维位移场的测量.
9. A method to measure coaxiality of axisymmetric aspheric lens is introduced.
介绍了一种轴对称非球面透镜的光轴共轴度的测量方法。
10. An axisymmetric finite element electro-thermo-mechanical model for resistance spot welding process is introduced.
介绍了模拟点焊熔核形成过程的轴对称电、热、力学有限元模型。
11. Measures the time mean velocity and velocity fluctuation using a hot film anemometer with different confinement ratio for the axisymmetric turbulent jet in a dead-end tunnel.
介绍了采用热膜流速仪量测堵头管中不同受限度轴对称射流的时均流速和流速脉动。
12. After being renormalized with the standard scheme, the thermodynamical entropy of the general stationary axisymmetric black hole is found.
从而，我们得到了经过重整化的一般稳态轴对称黑洞热力学熵表达式。
13. Applying 2D axisymmetric elastic-plastic FEM, the simulations of drawing of B10 copper tubes were carried out with the aid of nonlinear FEM software Marc.
借助大型非线性有限元软件Marc,应用二维轴对称弹塑性有限元法模拟了B10白铜管的拉拔过程,对比分析了优化模具后铜管拉拔和实际生产中的铜管拉拔对模具以及铜管质量的影响。
14. Restriction of Laplace Transform Method Used in Axisymmetric Field
光学层析中拉普拉斯变换法的适用条件
15. The Application of Axisymmetric Property on the Definite Integral Operation
函数的轴对称性及其在定积分中的应用
16. distributed axisymmetric imperfection
分布轴对称缺陷
17. ANSYS was utilized to establish the two-dimensional axisymmetric finite element model of rectangle co-axial seal(Gelai ring),which is most widely used in sliding ring conbined seal rings.
利用ANSYS建立了滑环式组合密封圈中应用最为广泛的方形同轴密封件(格来圈)的二维轴对称模型,分析了滑环厚度对接触压力的影响及液体压力对密封圈变形的影响。
18. unified axisymmetric characteristic line theory
双剪统一轴对称特征线场理论
19. countercurved axisymmetric reducer
反向曲线旋转体变径段
20. Amended Perturbation Solution for Axisymmetric Vibrations of Annular Membranes with Varying Density
变密度环形薄膜的轴对称振动修正摄动解
21. Pitch-yaw coupling can be neglected only for nearly axisymmetric vehicles.
只有对接近于轴对称的飞行器，俯仰与偏航的耦合才能略去。
22. So long as proper handling is conducted,the shell theory can be applied to axisymmetric thick shell.Thus the problem of three dimensional elasticity can be avoided.
只要恰当处理，薄壳理论可用于轴对称的厚壳，因而回避了厚壳的三维空间弹性力学的问题。
23. Experimental investigation on cavitation noise of an axisymmetric body
回转体头部空化噪声特性的实验研究
24. A Numerical Nonlinear Analysis of the Flow around Partially Cavitating Axisymmetric Body
回转体局部空泡流的数值分析
25. Experimental study of flow noise scaling of an axisymmetric body
回转体流噪声相似律的实验研究
26. Flow Noise Scaling at the Stagnation Point of an Axisymmetric Body
回转体驻点处的流噪声相似律
27. Differential Cubature Method for Solving Axisymmetric Free Vibration of Thick Circular Plates
圆板轴对称自由振动的微分容积解法
28. Large-Eddy Simulation of a Round Turbulent Jetunder the Flow Axisymmetric Assumption
圆湍射流的轴对称大涡模拟
29. In order to eliminate the hysteresis error of piezoceramic servo tool during non axisymmetric curved surface turning, three feedforward controlling mathema tical models have been established, i.
在分析压电陶瓷刀具迟滞特点的基础上建立了3种消除迟滞误差的前馈控制数学模型,即:升压模型、峰值降压模型及任意点降压模型。
30. Accurate determination of a balanced axisymmetric vortex in a compressible atmosphere
在可压缩大气里平衡轴对称涡旋的精确测定
31. In the nonlinear bending theory of circular sandwich plates, nonlinear bending ofthe plates under the action of axisymmetric uniformly distributed line load is adifficult problem.
在夹层板的非线性弯曲理论中,夹层圆板受轴对称均布线荷载作用时的非线性弯曲是一个比较困难的问题。
32. With the ordinary boundary conditions, the numerical solution was presented for the problem of axisymmetric buckling.
在比较简单的边界条件下，进行了轴对称屈曲问题的数值求解。
33. The exact solution is presented for the statics of laminated thick walled cylinder carrying an abitrary distribution of axisymmetric load.
在沿筒轴方向任意分布的轴对称荷载下，给出叠层厚壁筒静力问题的精确解。
34. The analysis of the finite element method using th e axisymmetric model was employed to assess the mechanics behavior of the rubber toughening in mesostructure.
在细观结构上采用典型轴对称单元的有限元分析来预测增韧环氧树脂的力学行为。
35. Axisymmetric characteristics line theory based on triple shear unified yield criterion and its applications
基于三剪屈服准则的空间轴对称特征线场理论及其应用
36. YDUAN for mixed variational problems, a new mixed formulation based on Riesz representing operotors is presented for the thin axisymmetric cylindrical shell with free egde boundary conditions.
基于文[8]发展的混合结构问题稳定方法的框架，针对自由边界条件轴对称薄圆柱壳体问题，给出了其新型混合有限元计算模型。
37. Optimum Shape Design of Axisymmetric Body Tail for Minimum Drag
基于最小阻力的回转体尾部外形优化设计
38. Based on the classical nonlinear plate theory,axisymmetric post-buckling behavior of a functionally graded circular plate under radial compression was investigated.
基于经典非线性板理论,研究了功能梯度圆板在均匀的径向压力作用下的轴对称过屈曲问题。
39. A Panel Method for the Analysis of a Partially-Cavitating Axisymmetric Body
基于面元法回转体定长局部空泡的绕流计算
40. NUMERICAL SIMULATION OF THE FLOW AND PHASE-CHANGE HEAT TRANSFER PROCESS IN AXISYMMETRIC POROUS MEDIUM
多孔介质内轴对称流动与相变传热过程的双倒易边界元数值模拟
41. A HIGH ORDER MODEL OF AXISYMMETRIC DELAMINATION ANALYSIS ON SANDWICH PLATES
夹芯板轴对称脱层分析的高阶模型
42. Experiment on Stability for Mixed-Compression Axisymmetric Supersonic Inlet with Fixed-Geometry
定几何混压式轴对称超声速进气道的稳定性实验
43. Design and Performance Calculation of the Mixed-Compression Fixed-Geometry Axisymmetric Supersonic Inlets
定几何混压式轴对称超声速进气道设计及性能计算
44. The unsteady blowdown process after the CJ detonation wave reach the exit of detonation tube was two-dimensional axisymmetric numerical simulated.
对爆震波到达爆震管口后，发动机的非定常排气过程进行了二维轴对称数值模拟。
45. Influence of circular angle in symmetric plane to the flowfield characteristics of an axisymmetric parachute
对称面圆周角对轴对称降落伞流场特性的影响
46. Mechanism of axisymmetric vectoring exhaust nozzle(AVEN) is analyzed in the view of elastodynamic capabilities.
对轴对称矢量喷管机构进行了弹性动力学分析。
47. The yield conditions of axisymmetric circular plate and shallow spherical shell of reinforced concrete based on Twin shear stress yield criterion are presented in the paper.
导出了基于双剪屈服准则的钢筋混凝土球扁壳的屈服条件,并利用此屈服条件求解出其极限荷载。
48. Then a suitable statement of patch test for axisymmetric solid nonconforming element is presented.
导出了轴对称非协调元分片检验中检验函数的形式，其位移函数是一种不完全的线性函数。
49. Numerical simulation of supersonic lateral jet interactions for an axisymmetric body in supersonic flow
尖拱弹身横向喷流数值模拟
50. Data analysis and processing of the axisymmetric problem in the multi-layered piezoelectric media space
层状压电介质空间轴对称问题的数据分析与处理
51. An atmospheric balanced model of an axisymmetric vortex with zero potential vorticity
带有零位势涡度轴对称涡旋的大气平衡模式
52. A combined hybrid axisymmetric solid element with the constant stress mode
常应力模式下的组合杂交轴对称元
53. The axisymmetric problems, bar and beam systems as well as space systems FEM are introduced by combining with engineering applications.
并结合工程应用介绍轴对称问题、杆梁系统、空间结构有限元法等。
54. A nonlinear axisymmetric finite element model was built to simulate position on rim,inflation and free rotation of radial tire.
建立一种子午线轮胎的轴对称非线性有限元模型,用以模拟轮胎的轮辋定位充气自由旋转过程。
55. An axisymmetric coupled thermo -mechanical model for inertia friction welding process of large-sized GH4169 alloy ring part is established.
建立了GH4169合金大型环形件惯性摩擦焊的轴对称热力耦合分析模型;
56. The concept of deformation band is introduced to describe the deformation localization phenomenon in rock under axisymmetric condition.
引入变形带描述轴对称状态下岩石应变局部化现象。
57. AXISYMMETRIC VIBRATION ANALYSIS OF FLUID-FILLED CYLINDRICAL SHELLS IN ELASTIC MEDIUM
弹性介质中充液圆柱壳的轴对称振动分析
58. Axisymmetric Free Vibrations of an Infinite Micropolar Thermoelastic Plate
微极热弹性无限板的轴对称自由振动
59. Steady-state vibration analysis of layered saturated soils under axisymmetric cyclic loading
成层地基在轴对称荷载下的稳态振动分析
60. Solutions of axisymmetric load applied to layered foundation
成层地基轴对称问题的基本解
61. Calculation of strain and stress for flexible pipes under axisymmetric load
挠性接管在轴对称载荷下的应力应变计算
62. An axisymmetric shell element for both mid-thick and thin shells are presented.
推导了一种中厚壳和薄壳都运用的轴对称壳单元。
63. The flash butt welding parameters of axisymmetric 45 steel were determined utilizing the orthogonal test.
摘要利用正交试验法确定了45钢的闪光对焊轴对称件焊接工艺。
64. Numerical simulation of finite element for pile under uplift loading is done by axisymmetric model.
摘要利用轴对称模型对等截面桩进行承受上拔载荷作用的有限元模拟。
65. A steady flow round a partially cavitating axisymmetric body was studied under the assumption that the fluid is inviscid and incompressible and the flow is potential.
摘要在流体为无粘不可压和流动有势的假定下，研究了轴对称体的定常局部空泡流。
66. Based on the classical nonlinear plate theory, axisymmetric post-buckling behavior of a functionally graded circular plate under radial compression was investigated.
摘要基于经典非线性板理论，研究了功能梯度圆板在均匀的径向压力作用下的轴对称过屈曲问题。
67. The two-dimensional axisymmetric subsonic-transonic-supersonic flow in an experimental arcjet thruster is simulated numerically using flux vector splitting method.
摘要对一实验电弧加热式发动机二维轴对称亚跨超音速流动进行了数值模拟，所采用的方法是矢通量分裂算法。
68. An analytical model is established for axisymmetric parts in deep drawing.
摘要建立了轴对称件拉深侧壁起皱的数学模型。
69. Based on the theory of energy conservation and the equation for the gas mass balance inside cavity, a dynamic model for axisymmetric thin cavity is developed.
摘要运用基于能量守恒的空泡截面独立扩张原理和空泡内部气体质量守恒原理，建立轴对称细长体空泡的动力学数学模型。
70. The multi-stage axial compressor performance was measured using a streamline curvature method based on two-dimension (axisymmetric) mathematical model.
摘要采用二维（轴对称）数学模型，应用流线曲率法求解多级轴流压气机特性。
71. Using axisymmetric full Navier-Stokes equations, the thermo-chemical nonequilibrium flow in hypersonic nozzle was simulated and the scale effects due to nonequilibrium were analysed numerically.
摘要采用轴对称热化学非平衡全N-S方程，数值分析了高超声速喷管流场中非平衡引起的尺度效应。
72. The near field of the CO2 laser with three dimensional axisymmetric folded-combined cavity is analyzed when it is misalignment.
摘要针对三维轴对称折叠组合腔CO2激光器在失调运行时的近场特性进行分析。
73. Influence of supporting way and model scale on dynamic derivatives of axisymmetric body
支撑方式和模型尺度对轴对称体旋转导数的影响
74. Numerical study of axisymmetric dielectric resonators Shouyuan Shi Liuqing Yang Prather, D.W.De...
文献的详细信息如下，能下载的微友帮下忙哦，谢谢啦。
75. Calculation of the Axisymmetric Nonlinear Magnetostatic Field Using the New-Type Equivalent Source Method
新型等效源法求解轴对称非线性静磁场
76. Parallel Numerical Investigation of the Supersonic Base Pressure Feature of an Axisymmetric Body
旋成体超声速底压特性的并行数值研究
77. Axisymmetric wave propagation and attenuation along viscoelastic cylind rical tube for a given boundary are investigated within the framework of linear viscoelasticity.
本文在线性粘弹性模型框架内研究了一定边界条件下无限长粘弹性圆柱管中轴对称波的传播和衰减。
78. The radiative feedback and radiative output of oil pool fires with water substrate were ob-tained on the basis of axisymmetric fiame assumption.
本文基于轴对称灰体火焰的物理假定，运用二维数值积分方法，对含水层油品燃烧过程反馈热辐射以及火焰对环境的热辐射水平进行了估算；
79. In this paper, axisymmetric nonlinear dynamic equations of fiber reinforced symmetric cross-ply laminated flat spherical shells are found including transverse shear deformation.
本文建立了考虑横向剪切影响、纤维增强对称正交铺设层合扁球壳的非线性动力方程。
80. This paper uses a new optimization approach named micro genetic algorithm to optimize the preform die shape in H-shape axisymmetric forgings.
本文用微观遗传算法对H型截面锻件进行了预锻模优化设计，以实现此锻件的无飞边锻造。
