cam

cam

1. Nungz Cenzfuz cam:"Yawz guh cij dwg lingzvued souj?

"侬全福嘇：“喻抇吇嘚灵活守？”

2. The radius of a circle described by a crank, cam, or similar machine part.

(曲轴的)半径曲柄、凸轮或类似机器部件形成的圆的半径

3. Note that kernel contains multiple “submodules” (xpt, probe, and cam).

)注意到kernel包含多个"子模块"(xpt, probe, and cam)。

4. CAMCAD is a data preparation workstation for CAM,test support and DFM.

CAMCAD是用来做计算机辅助制造、测试支持和可制造性设计的数据准备工作站。

5. CAPP is the key link of CMK CAM and its integrate and one of the technical bases of CIMS.

CAPP是连接CAD和CAM、实现CAD/CAM真正集成的关键环节，是计算机集成制造系统的重要技术基础之一，因此，研究和应用CAPP技术具有重要的意义。

6. Ca2+ and calmodulin (CaM) can activate the NOS in the endochylema which can catalyze the form of NO.

Ca~(2+)与CaM偶联并结合于胞浆中NOS相应的位点上激活NOS; 后者催化NO的生成。

7. Another major element of CIM is computer-aided manufacturing ( CAM ).

CIM的另一主要部分是计算机辅助制造(cam)。

8. Application of CL Formula in CAM Software for NC Machining.

CL公式在数控线切割机床CAM系统中的应用

9. The activity of CaM and AC, the production of cAMP and cGMP were not affected by Dex.

Dex对血小板钙调素(CaM)和腺苷酸环化酶(AC)活性,以及对cAMP和cGMP的生成均无明显影响。

10. EGTAand CaM antagonist(CPZ and TFP)inhibits the rising of CAT activity and increases the H~2O~2 content.

EGTA 和钙调素抑制剂(CPZ 和 TFP)抑制了 CAT 活性的中期升高,提高了 H_2O_2含量。

11. The cages of cam followers of series KR(E) are made of steel (fig 14).

KR(E)系列凸轮随动轴承保持架是钢制的(图14)。

12. TEE identification of proximal coronary artery is feasible in most patients,and CFV in the LAD cam be measured by TEE.

TEE显示冠状动脉及其近段分支是可行的 ,并可对LAD的CFV进行测量

13. The name Cambridge is a derivative of the name of the River 'Cam'.

‘cambridge’这个名字是‘cam’河的派生词。

14. The ability of an electronic design data base to recognize connections by association of data. Connectivity facilitates design automation and CAM processing.

一个电子设计数据库通过数据联系去识别连接的能力。连通性有助于设计自动化和计算机辅助制造。

15. A spring-loaded cam arrangement, using spring force to press the motor encoder unit against a moving component.

一个装弹簧的凸轮配置,用弹簧力把带传感器的轴承压在主杆的移动部分。

16. The value-opening mechanism includes a valve lifter and a cam on a camshaft.

一套气门开启机构包括一个气门挺杆和一个在凸轮轴上的凸轮。

17. A massive power hammer,raised by a cam until released to fall under gravity.

一种大动力锤,通过凸轮提升在重力作用下释放。

18. Cam: So Let's go to cinema together, OK?

一起去看电影,好吗?

19. Upper arm pivots have 4-step cam adjustment for easy roll center changes.

上臂支点有4步凸轮调整容易轧辊中心的变化。

20. Cam : Seeley, it's not gonna be like this forever. One day they'll die.

不会永远都这样子的。他们迟早会死的。）

21. The prevalence of CAM use was around7~87.6% in the world.

世界各国辅助与另类医学的使用率约在7~7.6%右，个人服务过的安宁病房经验，至少有50%癌末病人曾使用过另类疗法。

22. Koster, M. P., Vibrations of Cam Mechanisms, (1974),MacMillan Press.

中川宪制,夏生荣译,工程振动学,上海:上海科技出版社,1981年.

23. The discal multiple cam, which are the key parts in close-joining vegetable auto-grafting robot system, are designed.

为了减轻蔬菜嫁接的劳动强度，设计了一种结构简单、适合我国国情的蔬菜嫁接机。

24. In order to find a matched color with the CAM decals, I sprayed blue on a plastic board and put "2" decal on it.

为了找出与CAM贴纸相近的颜色，我在胶板上喷了蓝色然后贴上“2”这个图案。

25. The mathematical expression derived can be served as a mathematical model for CAM and computer graphics.

为了解决这一问题,本文为计算机辅助制造与计算机绘图建立了数学模型。

26. Hidden Cam Office Sex Ftv Girl .Com Black Girl Breast!

亚洲交友中心，免费开放注册，帮助大家认识异性朋友！

27. These include dobbies, cam motions, electronic Jacquard machines and Jacquard harnesses.

产品包括凸轮开口装置、电子多臂机、电子提花机和提花织造用的通丝。

28. Forgings for heavy and light truck, mini-bus and car, engine crankshaft, con-rod, cam shaft and axle of railway truck.

产品简介：各类重型、轻型、微型汽车和轿车锻件、发动机曲轴、连杆、凸轮轴锻件、机车系列火车轴。

29. A basic survey of CAD and CAM of compressors in abroad is described in this article.

介绍了国外压缩机行业应用计算机辅助设计和计算机辅助制造的基本概况。

30. It is defined as the perpendicular distance between the follower's axis of motion and the center of the cam.

从凸轮的转动中心到直动推杆的导路之间的垂直距离。

31. The design of motion law of follower component is the base of cam mechanism design.

从动件运动规律的设计是凸轮机构设计的基础。

32. Children will meet Grandma and Grandpa ELF, SaSa, Hipp, Cam and more ELF friends as the site grows.

他们时而向老师一般，教孩子们读写单词，时而又向朋友一般，跟孩子们做游戏，给孩子们讲故事。

33. And he took them as they cam.

他对它们全都一视同仁。

34. In my experience, the full-motion video from a USB cam is blurry at best.

以我的经验,即使在最好的情况下,来自USB摄像机的运动视频也是模糊的。

35. Man, you're such a chump at basketball, you cam barely make a basket.

你在篮球上真是不行，连一球都投不进！

36. What do you think I cam do to help them?

你看我能做什么来帮助他们。

37. Cam you tell me what your full name is, please?

你能告诉我你的全名吗?

38. Use a USB cam, but it will almost certainly not provide usable results.

使用USB摄像机,但是它提供的结果往往不好。

39. I'll be so glad if you cam come.

假如你能来,我将是非常高兴的

40. If the follower loses contact with the cam, it will fail to work.

假如随动件和凸轮脱离接触，就不能起作用。

41. Stop: stop rotating output shaft, cam rollers contact roller cam bearings taper ribbed support of the re-direct.

停止：出力轴停止旋转，凸轮滚子接触滚子轴承式凸轮锥度支撑肋的重直部分。

42. Take your time, sir. I cam wait.

先生，请慢慢来，我可以等的。

43. To develop the new products we adopt CAD, CAE, CAM, and FEA system.

公司在产品开发中，不断改进国际先进技术，采用cad，CAE，CAM，FEA和有限元分析设计。

44. Miss Cam is qualified for joining the club .

兰蒙小姐有资格参加俱乐部。

45. Some of them are home and office surveillance, watching the kids, nanny cam, intrusion alarm, or just for fun.

其中一些是家庭和办公室的监测，看孩子，保姆凸轮，入侵报警，或者只是为了好玩。

46. I. Cam Follower Shaft Screw.

凸轮传动轴.

47. A cam that activates another part; a wiper.

凸轮启动另一部分的凸轮; 挺杆

48. A cam that activates another part;a wiper.

凸轮启动另一部分的凸轮；挺杆

49. A projecting cam, as on a rotating shaft, that activates another machine part.

凸轮如转轴上突出的挺杆，使另一个机器零件活动

50. Cam controller is a kind of electric lifting.

凸轮控制器是起重电气的一种。

51. The cam is an egg-shaped piece of metal on a shaft that rotates in coordination with the crankshaft.

凸轮是一在轴上的蛋形的金属，通过曲轴协调旋转。

52. The camshaft has a cam, on which there is a lob, or bump.

凸轮轴上有一个凸轮，凸轮上有一个凸角。

53. Graduation: laborer rotating, contact roller cam roller cam bearings taper ribbed support of the curve.

分度:出力轴旋转,凸轮滚子接触滚子轴承式凸轮锥度支撑肋的曲线部分。

54. The indexing cam was in the rear derailleur rather than the shift lever.

分度凸轮的是在后方变速器，而不是变速杆。

55. The CVSs are used to enable the program to adapt to different cam mechanisms.

利用结构特征变量来实现计算程序对不同凸轮机构的自适应化。

56. Who Actually Owns Cam Ram Bay?

到底谁是金兰湾的主人?

57. Stripping depth adopt cam style control,can make stripping depth reach to the canniest fit.

剥皮深度采用凸轮方式控制，能使剥皮深度达到最精准。

58. The lift of the heddles can be achieved by using cam or dobby operated harnesses and each has its own limitations.

可以采用凸轮或多臂来控制综框的升降,但这两种方式都有自身的局限性。

59. Through high-speed surcharging close to the cam to load flexibility, thereby strengthening the rigid partition.

可通过高速预压负荷来接近凸轮的弹性区，从而加强分割区的刚性。

60. Photo: Prof. Tian Sen held a workshop for CAM staff.

图：田森教授正在为CAM员工举行讲座。

61. All cam slides to be adjustable in the press either by an insert on the cam slide or on the driver.

在冲床中可通过在凸轮或驱动装置上的镶件调节凸轮滑块。

62. CAM is an important item in engineering training ,and MasterCAM is used widely for CAM .

在工程训练中 ,CAM (计算机辅助制造 )是一项重要的实训内容 ,而MasterCAM则是CAM中最为广泛的应用软件。

63. To spend dusk on the banks of the Cam is a tonic for one's soul.

在康河边上过一个黄昏是一服灵魂的补剂。

64. A chance to see caesar, kentucky and kiev on our chicken coop cam.

在我们的鸡舍摄像头中，你有机会看到凯撒、肯塔基和基辅。

65. Install a new cam bolt, cam and new nut in the axlRe-align the reference marks.

在轴上安装新凸轮螺栓，凸轮和 新螺帽。重新校准参考标记。

66. In this arrangement, the cam lobes push against round metal cylinders called cam follower.

在这种布置中，凸轮凸角推动凸轮挺杆。

67. Cam Recording in dark area with no light or no flash can be used?

在黑暗中录映或没有闪光可以使用?

68. An external CAM is usually used when the range of VCI/VPI values varies widely or is unknown.

外部中央地址存储器常在VPI/VCI值域很大或者不确定的时候使用。

69. Imagine Vietnam reopening the naval base at Cam Rahn Bay to its old enemy the US in response to China's belligerence.

大家不妨想一下，越南因为中国的交战状态而重新开放金兰湾给其旧日敌人美国，将是怎样的情形。

70. New design of large cam reduces the impact of inflexion. You can get a desired stitch by using different cam.

大送凸轮的设计减少了拐点处，通过变换送布凸轮可缝制出各种线迹。

71. Nip wire adopts cam style nip equal to, nip strength big,test stability.

夹线采用凸轮方式夹合，夹力大，测试稳定。

72. If your draw stop timing is correct then I would have to go with the cam lean.

如果你的拉停同步是对的话,那我只能想是偏心轮的倾斜度有问题.

73. If practical, cam pierce stations should be designed to facilitate punch removal for in press maintenance.

如果可行,在凸轮冲孔工序中冲头应设计成便于移出,从而方便在冲床中维修。

74. If the taper support ribbed surface and the cam cam rollers have not Sleek, will be for damage to the division.

如果锥度支撑肋的凸轮表面和凸轮滚子之间有不滑顺情况，则会损害到分割器。

75. William is interested in rockets and space, and he laps up al he cam read about them.

威廉对火箭及太空很感兴趣,他贪婪地学习他所能读到的所有有关材料。

76. William is interested in rockets and space,and he laps up al he cam read about them.

威廉对火箭及太空很感兴趣，他贪婪地学习他所能读到的所有有关材料。

77. The engineering database provides the information basis for the CAD/CAM integration when it is applied in CAD and CAM.

工程数据库技术在计算机辅助设计(CAD)和计算机辅助制造(CAM)中的应用为CAD/CAM的集成提供了信息基础。

78. Pattern CAM Manufacturing Center of Pingyang Guowei Machine Co., Ltd.

平阳县国威机械有限公司膜具CAM制造中心。

79. And a new type sphere-conical roller and globoid cam graduator is designed.

并在此基础上设计出了一种新型的球锥滚子弧面凸轮转位工作台。

80. The application examples of KBE in cam and tailstock design were given.

并给出了知识工程在凸轮精确建模和机床尾架设计应用实例。