cambered

cambered

1. No-fulcrum &cambered designation, shady flexible strip made from high-carbon steel, makes the brusher never drums from windshield. It will ensure you a safety driving.

1先进的无支点弧形雨刷设计，隐藏式的高碳钢弹性压条：使雨刷完全服贴于前挡玻璃上不跳动，给您最佳的雨中行车安全保障。

2. 1． Camber line becomes orthogonal arc tooth wimble gear.

1． 中心线成直角的弧齿锥齿轮。

3. 2． Camber line won"ts do orthogonal arc tooth wimble gear.

2． 中心线不成直角的弧齿锥齿轮。

4. Study on Primary Forming Technique of NBR Sponge Thin Camber

NBR薄型曲面海绵成型技术的研究

5. Application of STL File in Camber Splice

STL文件在可视化曲面拼接中的应用

6. The recirculation rate from Camber and Acclivity covers 92 percent while Acclivity (8~12 h) with lower rate of 71.4 percent.

“下弧型”、“上斜型”抬高早期溶栓再通率高,两型占92.0%; “上弧型”再通率低(8-12 h),占71.4%。

7. First PLC system completes AGC operation and feedback control;secondary computer completes model calculation and setup of camber control.The whole system reaches the highest level of the world.

一级PLC系统完AGC的执行与反馈控制,二级计算机完成凸度控制的模型计算和设定,整个控制系统达到了当今世界最高水平。

8. In General, the Board, a thicker width of the appropriate ones, for a three-tier Board either cambered pressure line.

一般来说，纸板越厚，压线宽度相应要大一些，对于三层纸板也可以采用圆弧面的压线轮方式。

9. The superstructure has a depth of 3 ft. 6 in. with a marked camber of 19 ft. 8 in.

上部结构的建筑高度为3英尺6英寸,有19英尺8英寸显著的上拱度。

10. The superstructure has a depth of 3 ft. 6 in. with a marked camber of 19ft. 8 in.

上部结构的建筑高度为3英尺6英寸，有19英尺8英寸显著的上拱度。

11. LOWER ECCENTRIC CAMBER ADJUSTMENT BOLT

下偏心外倾角调整螺栓

12. Keywords downer;gassolids separator;cone with cambered surface;baffler;separator efficiency;

下行床;气固分离器;弧面锥体;导流板;分离效率;

13. Particle Flow Patterns in a Gas-Solid Separator with Cambered Surface for Cocurrent Downflow Reactors

下行床弧面气固快速分离器内的颗粒运动

14. Why does different facial form suit to plant camber?

不同的脸形适合何种眉形？

15. The two inner mounting positions of each camber link offer an easy way to adjust camber rise.

两个内安装的立场，每一个曲面的联系提供一种简单的方法来调整曲面上升。

16. Camber line won"ts do orthogonal arc tooth wimble gear.

中心线不成直角的弧齿锥齿轮。

17. Camber line becomes orthogonal arc tooth wimble gear.

中心线成直角的弧齿锥齿轮。

18. In order to increase water speed and turbulivity in ice-storage tank of direct evaporating and external melting ice-on-coil system, cambered baffles are installed in the ice-storage tank.

为了提高直接蒸发式外融冰系统的蓄冷槽中水的流速和湍流程度,强化水和冰之间的传热,在蓄冷槽内装设了纵向弓形折流板。

19. In order to guarantee the stationarity and safety of trains running in high-speed railway, strict limitation on long-term camber of bridges is needed.

为保证列车行驶的平稳性和安全性，高速铁路桥梁的徐变上拱度有十分严格的限值。

20. Kowloon North Camber Typhoon Shelter

九龙北南塘避风塘

21. This paper introduces the devlopment tendency of modern constructing decoration and the production,application and the developing prospects of polished all porcelain cambered plate.

介绍了现代建筑装饰的发展趋势和全瓷抛光弧面板的产生、应用及其发展前景。

22. The construction and working principle of roller camber grinding were introduced.The cause of roller camber defects and the prevention measures were analysed.

介绍了轧辊凸度磨削机构的构成,工作原理及凸度的实现过程,分析了凸度缺陷产生的原理及防止措施。

23. The paper introduces the control of camber in the construction of non prestressed continuous box beam, appearance and development of cracks of bottom plate of box beam.

介绍非预应力连续箱梁施工中预拱度的控制,以及箱梁底板裂缝的出现和开展,并分析其成因,从而确保箱梁施工质量满足设计和施工规范要求。

24. The term "camber and valley bulging" has been used loosely in Britain to describesuperficial valley disturbances in a broad sense.

从广义上讲，“弓形坡和河谷外鼓”这个专用词在不列颠广泛用于描述浅表河谷扰动。

25. Second, the camber equation is developed for the crss points.

从曲面方程和直线方程的联立解求出交点。

26. Starting with airfoil 2, the pitching moment is increased from -.15 to -.25 to provide more aft loading and aft camber.

从翼型2俯仰时刻由原来的15年至今25年至今,以提供更多后部后部拱落.

27. Their roads were also slightly curved in a crown or camber so that the water would run off.

他们设计的公路还有轻微的路拱或弯拱曲线，便于路面排水。

28. When he was a boy at Camber, his father got into trouble with the police.

他孩提时住在坎伯，他的父亲和警察惹上了麻烦。

29. Deck plating outside accommodation should have camber.

住所甲板外面应该有梁拱。

30. Collocation must be brushed with bevel angle when using, can use the vertex damage on filling camber, or pure with will enhance eyebrow quality.

使用时必须与斜角刷搭配，可用来补眉形上的缺角，或单纯用来加强眉色。

31. The inner camber link ball studs are vertical at both ends, allowing fine roll center adjustments.

党内拱连接球钉的垂直两边，让罚款轧辊中心的调整。

32. Camber design of pinch pass mill and its practice

冷轧平整机辊型设计与实践

33. spherical, hemispherical, domed, convex, cambered

凸球状的。球形的。凸的。凸圆的。

34. Formula to evaluate translation of the tooth-surface and the equation to describe the generatrix of the negatively cambered sooth-surface were derived, respectively.

分别推导得到齿面平移距离和内凹齿面母线方程的计算公式。

35. The front subframe is modified for extra camber and castor.

前副车架被修改为额外拱形和蓖麻。

36. Foredeck plates pulled down against camber of deck beams.

前甲板板推倒对曲面的甲板梁。

37. The method also permits inverse design with flaps, specification of geometric constraints (thickness, camber, etc.).

办法还允许逆向设计皮瓣、几何约束规格(厚度、拱等).

38. Do not attempt to adjust the vehicles Caster or Camber by heating, bending or by performing any other modification to the vehicle's front suspension components.

勿借加热、弯折、或以其他方法修改前悬吊系统组件，来调整车辆之后倾角或外倾角。

39. The weaving technology of monolayer camber weaving

单层曲面机织布的织造技术研究

40. The old technology and equipment in the curve of columnar,plane and cambered coiled pipes for circular pipe-coiled pipes and half pipe-coiled pipes were very complicated.

原有的圆管盘管和半管盘管中的柱面螺旋盘管、平面盘管和曲面盘管的结构繁杂、弯制质量差以及弯制工艺工装造价昂贵。

41. "To Camber Company, please. It 's on 32nd avenue. "

去坎培克斯公司。在第32街上。

42. DEVELOPMENT ON HOLLOW MOULD OF DOUBLE CAMBER BENDING-TEMPERED GLASS

双曲面弯钢化玻璃空心模具的研制

43. variable camber adaptive wing

变弯度自适应机翼

44. Any shape will produce lift if tilted to the air flow direction (inclined) or cambered (curved).

只要与气流方向成一定倾斜角，任何外形都可以产生升力。

45. variable camber inlet guide vane

可变弯度的进口导向叶片

46. Taiwan's central lid camber like foreign-style multi-storied building construction, this is the Fort Anping which the posterity knew very well.

台的中央盖起拱劵式的洋楼建筑，这便是后人熟知的安平古堡。

47. INVESTIGATION ON PROBABILITY OF SELF-OSCILLATION INDUCED BY VORTEX SHEDDING FROM A THIN CAMBERED BLADE

叶片表面旋涡脱落诱发自激振动的可能性

48. The joint of all the camber will be the camber curve.

各截面凸度连线便是凸度曲线。

49. The perfect camber design can be obtained by introducing the center/side ratio concept of contact pressure and choosing proper ratio.

同时引入辊间接触压力的中、边部比值概念并作合理选择，使设计出的辊型更加完善。

50. The camber is the curvature of the cross section and the crown is the highest point of the camber.

图中向上倾斜部分是路拱,该部分的最高点是路脊。

51. The camber is the curvature of the cross section and the crown is the highest point of the camber. A vertical curve, clothoidic or parabolic, occurs at a change of gradient.

图中向上倾斜部分是路拱,该部分的最高点是路脊。坡度变化时,出现了一个回旋曲线式的或者抛物线式的垂直曲线。

52. It has two sides, one is a circle, the other is a camber.

圆锥有两个面,一个面是圆形,另一个面是曲面。

53. For the cost comparison, specify costs for steel, shear studs and beam camber.

在价格的比较时，钢材、抗剪螺栓和梁拱的价格可以设定。

54. In the design, slide camber and pin were used for side-face and side-hole forming, and a secondary pusher was used in lifter to avoid deformation in taking off a thin-walled castings.

在压铸模的结构中采用斜滑块机构成型侧型和侧孔;

55. The equation of camber is often used when the bend of girder is being studied.

在对梁的弯曲进行研究时,经常要用到弯矩方程。

56. In the New Blocks, the bust dart is tailed on the camber of the armhole, which makes bust line and waist line become level, fabric gentle and block smooth, the whole structure exhibits box type.

在新原型中，胸省设在袖窿弧线上，使得胸围线、腰围线变成水平，面料丝缕顺直，造型顺畅，整体结构构成箱型特征。

57. The electromobile goes into curve district when passing poiont B,and runs,along the camber line to point C.

在此期间检测到铺设在白纸下的薄铁片，并同时发出声光指示信息，实时存储、显示在“直道区”检测到的薄铁片数目。

58. The thickness ratio appeared to have little effect on lift coefficient at zero angle of attack, since the angle of zero lift was largely determined by the airfoil camber.

在迎角为零时，由于零升力主要由机翼中弧线决定，相对厚度对升力几乎没有影响。

59. Everyone in Camber knew his father, and the boy did not like to stay in the town.

坎伯城谁都认识他父亲，所以亨利不想再呆在城里了。

60. Formation of Fractionized Camber Based on Quadrangle Grid

基于四边形网格细分曲面的生成

61. Commissioning of the cambered torque limiter for tower crane

塔式起重机弓形力矩限制器的调试

62. camber stiffness coefficient

外倾刚度系数

63. A Study on Contact Patch of Tire with Camber and Sideslip

外倾和侧偏联合作用下轮胎接地印迹研究

64. Dynamic Model of a Moving Flexible Camber Beam

大范围运动柔性曲线梁动力学建模方法研究

65. How to reduce bigger arch camber of inherent stress box-beam

如何减少预应力箱梁起拱偏大问题

66. Like most techniques with mountain biking, turning has many variables, is the turn bend flat or off camber.

如同其它登山车的骑乘技巧一般，过弯也有很多变数，好比这个弯是个平顺的弯或带有起伏的弯。

67. If "Guo Liang" using decorative materials will be packaged into a curve it, camber warrants, you can make ceiling in the creative arts have become lithe up.

如果将“过梁”用装饰材料将它包装成曲线、曲面状，就可使天花板在你的艺术创意中变得轻盈起来。

68. Keywords Cambered Surface Worm Grinding Envelope;

孤面蜗杆;磨削;包络;

69. The contact pressure distribution and the shape of contact area in vertical state and camber state of tire are measured by pressure sensitive films, respectively.

实时记录了试验中轮胎受力与变形关系,并采用压力敏感膜测量了轮胎在垂直状态及侧倾状态接地区域内的压力分布状况。

70. Experimental results show that the corrected image meets the need of precision of the tube camber measurement system.And the method can easily be applied.

实验结果表明，该方法的校正精度较高，适用于管道弯曲度高精度的测量，而且易于实现。

71. 11.The cambered shape of the crystal is achieved by grinding the lower and upper surfaces.

对水晶镜面的厚度进行调整，进行首次光学检验，以检查出可能残留的杂质。

72. For straight-winged tailless airplanes, only the negative camber satisfies the conditions for flight.

对直机翼无尾飞机，只有负弯度才满足飞行条件。

73. The cambered shape of the crystal is achieved by grinding the lower and upper surfaces.

对镜面的双面进行打磨，造成拱形效果。

74. Analysis of Influence of Work Roll Profile on Side Camber of Plate

工作辊辊形对中厚板侧弯的影响分析

75. The thinking and method for the establishment of numerical model are adaptable to numerical simulation of laser hardening for cambered parts as well.

建立该数值模型的一些思路和方法也适用于各种曲面类零件激光淬火的数值模拟。

76. Research on Ultrasonic Inspection for Cambered Surface of Die Forging Profiles

异型模锻件凸凹弧面区超声波检测方法的研究

77. Keywords cambered plate spiral plate spiral flow heat transfer coefficent;

弓形折流板;螺旋折流板;螺旋流;传热系数;

78. Keywords cambered cam;NC programming;center distance;

弧面凸轮;数控编程;中心距;

79. Keywords Cambered Cam;Simultaneous Control;Generating Method;Programming;

弧面凸轮;联动控制;范成法;编程;

80. camber surfaced indexing cam

弧面分度凸轮