carburizing

carburizing

1. Model OE-HR-150DT serves to measure the hardness of hardmetals, carburizing steels, quenching steels, hardcast irons, mild steels, A1-alloys, Cu-alloys and malleable irons.

150DT型洛氏硬度计适用于硬质合金、渗碳钢、淬火钢、硬铸铁及软钢、铝合金、铜合金和可锻铸铁的硬度测定。

2. Application of BH-2 Catalyzer on the Pit Carburizing Furnace with PC Control

BH-2催渗剂在微机控制下的井式渗碳炉的应用

3. carbide dispersion carburizing

CD渗碳

4. Application Researches and Discussion on ECM Low Pressure Vacuum Carburizing Technology

ECM低压真空渗碳技术应用研究与探讨

5. RQD Series Huge Precision Controlling Pit Furnace for Gas Carburizing

RQD系列大型精密控制井式渗碳炉

6. L(U) Ying,CHEN Yang.The application of microcomputer control system to the phreatic model carburizing furnace[J].Applied Energy Technology,2001 (1):36-40.

[1]吕颖,陈阳.微机控制系统在井式渗碳炉上的应用[J].应用能源技术,2001(1):36-40.

7. When carburizing agents at different stages are mixed accordingly with water of different proposition,the carbon black on workpiece can be removed,which can be useful fo...

不同阶段的渗剂中，配以不同比例的水，可消除工件表面碳黑，有利于控制炉气碳势，实现反扩散，获得良好的渗层碳浓度梯度。

8. Two surface heat-treatment processes, liquid nitriding and sulfurizing, are used to compare with the current production process of liquid carburizing, with other variables remaining constant.

两种表面热处理液体渗氮及渗硫工艺与现行生产上原采用之液体渗炭淬火处理工艺,在尽量保持其他可变数不变的情状下加以比较。

9. intercooled continous carburizing furnace

中冷连续式渗碳炉

10. Middle-Deep Case Carburizing in Supporting-Roller Type Mesh Belt Furnace

中深层渗碳在托辊式网带炉上的应用

11. Application of Medium Silicon Nodular Cast Iron Pot for Carburizing Hand Sewing Needles

中硅球墨铸铁坩埚的应用

12. Process and Equipment of Acetylene Low Pressure Carburizing

乙炔低压渗碳的工艺及装备

13. Carburizing and Anti-carburizing for Ethylene Cracking Tube

乙烯裂解炉管的渗碳与抗渗碳

14. Vertical pit-type gas carburizing furnace

井式气体渗炭炉

15. Improvement of Workholders for Gas Carburizing Pit-type Furnace

井式气体渗碳炉工装改进

16. pit type gas carburizing electric furnace

井式气体渗碳电炉

17. The Application of IHT in the Carburizing

亚温淬火在渗碳中的应用

18. Rapid carburizing process by increasing furnace pressure is introduced and its mechanism is analysed.

介绍了快速压力渗碳工艺,并对其机理进行了分析。

19. This article recommends the process of direct quenching after carburizing for sucker rod pump liners.

介绍了抽油泵衬套渗碳后直接淬火处理工艺。

20. A newly developed BBH pre - vacuum - pumping carburizing furnace has been introduced in this paper.

介绍了新研制的预抽真空式可控气氛气体渗碳炉。

21. Introduces the microprocessor-based controlling system for pit gas carburizing furnace,and describes the constitution,controlling means and software.

介绍井式气体渗碳炉微机控制系统，描述了系统组成、控制方法及软件设计。

22. Carburizing and nitriding processing microcomputer control system is introduced, and heat treating technological tests are presented.

介绍渗碳、氨化过程工艺参数的微机控制系统以及热处理工艺考核试验。

23. The mathematical model of the transfer coefficient of carbon was deduced based on the kinetics of weight gain during gas carburizing.

从渗碳增重动力学出发,推导出渗碳过程混合控制阶段界面传递系数的计算公式。

24. The mathematical model of the tr ansfer coefficient of carbon was deduced based on the kinetics of weight gain du ring gas carburizing.

从渗碳增重动力学出发，推导出渗碳过程混合控制阶段界面传递系数的计算公式。

25. A carburizing agent, a kind of semi graphite, for steel making is developed.

以优质无烟煤为原料,经选矿提纯,提高煤的碳含量,再经石墨化处理制得炼钢增碳剂。

26. Taking the automotive rear axle gear as an example,the design and adjusting of nitrogen-based atmosphere carburizing process were conducted on the new-built mult-purpose chamber furnace.

以汽车后桥齿轮为实例,在新制造的箱式多用炉上进行了氮基气氛渗碳淬火工艺的设计、调试和检测。

27. Guided by software engineer and based on FDM and FEM,the computer simulating software has been developed on the carburizing process of common shape parts.

以软件工程学为指导,以有限差分法和有限元法为基础,开发了几种常见形状零件气体渗碳过程计算机模拟软件。

28. low pressure vacuum carburizing

低压真空渗碳

29. low temperature plasma carburizing

低温离子渗碳

30. low carbon carburizing steel

低碳渗碳钢

31. Krupp-type carburizing steel

克虏伯型渗碳钢

32. Keywords high speed steel（HSS）;?ledebrite steel;?super carburizing;

关键词高速钢;莱氏体钢;超饱和渗碳;

33. Keywords Iner-spline gear Carburizing Distortion Normalizing;

内花键齿轮;渗碳;畸变;正火;

34. Re-exploring on Catalyzing Mechanism of Carbonate in Pack Carburizing

再论固体渗碳剂中碳酸盐的催化机理

35. The gear reducer for high strength steel carburizing, carburizing hardening, low noise transmission.

减速器的轮为高强度渗碳钢,经渗碳淬火处理,传动噪音低。

36. The regularity and the control of the distortion in carburizing process are also preliminarily investigated.

初步探讨了渗碳变形规律及控制方法。

37. Keywords pressure carburizing;instillation;induration;

压力渗碳;滴注式;硬化;

38. The Application of Bipolar Thyristor to the Carburizing Furnace Control System

双向晶闸管在渗碳炉控制系统中的应用

39. hydrogen-free double glow plasma carburizing

双层辉光等离子无氢渗碳

40. double track pusher carburizing furnace

双排推杆式渗碳炉

41. So RE slat liquid carburizing may replace poisonous cyanide slat bath or "603" slat liquqid carburzing.

可取代剧毒的氰盐和微毒的“603”盐浴渗碳。

42. Keywords Alloy Structural Steel;Carburizing;Isothermal Quen ching;

合金结构钢;渗碳;等温淬火;

43. carburizing by solid matters

固体渗碳

44. Aging of Solid Carburizing Agent

固体渗碳剂的老化

45. Discussion on CarbonPotentialof Solid Carburizing

固体渗碳碳势的探讨

46. The carburizing velocities for various carburizing technologies in productive practices are studid,and the main factors affecting the carburizing velocity analysed.

在生产实践中，研究了各种渗碳工艺方法的渗碳速度，获得了完整的数据，并对影响渗碳速度的主要因素进行了分析。

47. The residual life of the tubes is estimated based on the carburizing damage analysis.

在考虑渗碳损伤的前提下对炉管的剩余寿命进行了评估。

48. pit-type carburizing furnace

坑式渗碳炉

49. ENDT for carburizing depth of steel parts based on RBF ANN

基于RBF神经网络的渗碳层深度电磁无损检测

50. Investigation on Structure Optimization of Carburizing Agent

增碳剂组成及结构优化的试验研究

51. Solidification Behaviores and Properties of Carburizing Cast Iron Melt

增碳铸铁熔液的特性与凝固行为

52. Keywords Multielement co-penetration;Alloy carburizing steel;Microhardness;

多元共渗;合金渗碳钢;显微硬度;

53. The mathematical model of multi stage carburizing is a linear partial differential equation, and superposability is an important property of the linear partial differential equation.

多段法渗碳的数学模型是线性偏微分方程。线性偏微分方程的一个重要性质是可迭加性。

54. huge carburizing pit furnace

大型井式渗碳炉

55. Heat Treatment Distortion of Heavy Carburizing Gear Ring and Its Control

大型渗碳齿轮圈热处理畸变与控制

56. The Application and Development of the Large-type Non-tube Carburizing Continuous Production Lines

大型连续无罐渗碳生产线的应用与发展

57. Effect of Sulphur in Natural Gas on Carburizing Process

天然气中的硫对渗碳的影响

58. The results show that these carburized gears by using BH energizing reagent get finer microstructure,lower heat distortion,deeper carburizing layer,b.

实验结果表明使用BH催渗剂后的渗碳齿轮轮齿组织得到细化,热畸变减小,渗碳层深度增加,渗碳层碳化物分布形态得到改善,渗碳层硬度梯度趋于平缓。

59. This paper deals with the carburizing process,microstructure,mechanical properties and quenching distortion of the air cooling low carbon bainitic steel.

对低碳贝氏体钢的渗碳工艺、显微组织、力学性能、淬火变形进行了研究。

60. Pulse gas carburizing technology was studied and its mechanism was analyzed in the paper.

对脉冲式气体渗碳技术进行了研究和应用,并对其机理进行了分析。

61. Renovation on continuous carburizing furnace

对连续渗碳炉的技术改造

62. The application,influence factors and process control of four kinds of heat treatment methods including tempering,carburizing,nitriding and induction quenching are analyzed.

对齿轮的调质、渗碳淬火、渗氮及感应淬火四大热处理工艺的应用范围、影响因素及工艺控制要点进行了分析。

63. The process may involve the use of molten sodium cyanide mixtures;pack carburizing with activated solid material such as charcoal or coke, gas or oil carburizing, and dry cyaniding.

工艺可能涉及到熔化的氰化钠混合物，带有活性固体物质如活性炭、焦炭等的固体渗碳，气体或油性渗碳剂，还有干法氰化。

64. From large amount of experiments,a mathematical model for describing the carburizing process is obtained in this paper.They are the presupposition of realizing microcomputer control.

并在进行大量实验的基础上，建立了渗碳体系的数学模型，为实施渗碳过程微机控制提供了保证。

65. plasma carburizing with arc source

弧光离子渗碳

66. The mathematical model with oxygen probe for determinating the carbon potential in carburizing furnace under metaeguilibrium state of carburizing atmosphere is set up.

当渗碳气氛处于介平衡状态时，在实验的基础上建立了氧探头测定渗碳炉碳势的数学模型。

67. Design and Manufacture of Ultra Large Type Gas Carburizing Furnace with Microcomputer Carbon-potential Control

微机碳势控制超大型气体渗碳炉的设计和制造

68. Rapid Carburizing Process by Increasing Furnace Pressure

快速压力渗碳工艺

69. To know heat treatment of vacuum, carbonnitriding, carburizing and protected quenching etc.

懂真空热处理，渗碳，碳氮共渗，软氮化，光亮淬火等

70. It is difficult to control heat treatment deformation of thin-wall parts in automatic transmission 4T65E in Buick Car by a routine controllable atmosphere carburizing following with oil quenching.

按常规可控气氛渗碳油淬工艺对别克轿车4T65E自动变速器中的薄壁零件进行热处理,零件的变形很难控制。

71. push-tray gas carburizing furnace

推盘式气体渗碳炉

72. In this paper,a drop-feed carburizing system controlled by the mode of all-impulse signal is suggest ed.

提出了滴注式气体渗碳采用全脉冲信号控制方式，并对其抗干扰性能和控制精度进行了分析。

73. Special temperature sensor must be developed in order to meet the need of specific environment including highly erodent, heat melt, vacuum and carburizing etc. die characteristic.

摘要对于测量条件恶劣，不能用常规传感器实现的温度测量，如高温强腐蚀性介质、高温熔体、真空、渗碳条件下，必须开发特种专用传感器。

74. NEW TYPE META-BAINITIC CARBURIZING STEEL AND ITS APPLICATION

新型准贝氏体渗碳钢及应用

75. Design and Adjusting of Nitrogen-Based Atmosphere Carburizing Process for a New Mult-Purpose Chamber Furnace

新箱式多用炉氮基气氛渗碳淬火工艺的设计与调试

76. Keywords anthracite;carburizing agent;semi graphite;

无烟煤;增碳剂;类石墨;

77. Keywords non ledeburite steel;fluidized bed furnace;over carburizing;

无莱氏体钢;流动粒子炉;过饱和渗碳;

78. Keywords thyristor;carburizing furnace;control system;

晶闸管;渗碳炉;控制系统;

79. intelligent control for depth of carburizing layer

智能渗层控制

80. Our main products are carbon water purification, gold carbon, industrial carbon, electroplating, carbon, alcohol-specific charcoal, charcoal monosodium glutamate, solid carburizing agent.

本厂主要产品为净水炭、黄金炭、工业炭、电镀炭、酒类专用炭、味精炭、固体渗碳剂。