cutter

cutter

1. CSE、SEC/ECP cutter to promote longer bit life for the full spectrum of formations.

CSE齿，SEC/ECP布齿提高在含硬夹层的软地质层中使用寿命。

2. MP3 WMA Cutter is a real time encoding/decoding, no disk space will be used when cutting audio files.

MP3播放的WMA切割机是一个实时编码/解码，没有磁盘空间时将使用的切割音频文件。

3. Study on the TiCN base cermet cutter blade[J].Cemented Carbides,2003, 20(3) : 133 - 137.

TiCN基金属陶瓷刀片的研究[J].硬质合金,2003,20(3):133-137.

4. WD Mechanic External Cutter can be usd to cut casings and tubings from outside to inside.

WD机械式外割刀有来从外向内切割各种套管或油管。

5. A wood cutter piloted our fighters over the mountains .

一个伐木人引导我们的战士翻山越岭。

6. One version of hot dog history says a butcher, or meat cutter, from the German city of Coburg was responsible.

一个关于热狗起源的版本指出一个来自德国的科堡的屠夫或者叫卖肉的发明了热狗的说法是可靠的。

7. Asymmetric dual-angle milling cutter used to point chutes, and inclined spiral groove, level surface.

不对称双角铣刀用来铣削角度槽、斜面及螺旋沟、台阶面。

8. The first NON-ELECTRIC gas cutter in the world.

世界上第一台无电气体切割机。

9. Our main products are electric drill、marble cutter、angle grinder、rotary hammer、pipe dredger,etc.

主要产品有手电钻、石材切割机、角向磨光机、电锤、管道疏通器等。

10. Mainly to transport the bricks cut by the cutter onto the Conveying Belt smoothly.

主要作用是将切割后的砖坯平稳地输送到集坯运坯带上。

11. Main brands are Ching-mao, David can, TCT, and other brand new and old bit / cutter.

主要品牌有菁茂，幼能，TCT等品牌新旧钻头/铣刀。

12. Mainly Renmo milling cutter, reamer, pulling knives, plate-shaped lathe tool, knife inserted teeth and bore drilling.

主要用于刃磨铣刀、铰刀、拉刀、盘形车刀、插齿刀及扩孔钻等。

13. All five sheets tear easily on micro-perf.No paper cutter is needed!

五张内页不需要裁切就很容易的排列。

14. This text introduces a measure system based on Single chip which can monitor displacements of the paper cutter.

介绍了一种基于单片机的切纸机位移测量系统。

15. The paper suggests a new method of cutting involete spur on gear hobbing machine by hobbing cutter with double-disk.

介绍了一种用圆盘双排滚切刀在滚齿机上连续展成滚切渐开线直齿圆柱齿轮的新方法。

16. An advanced intelligent system about automatic balance of on line emery cutter is introduced.

介绍了作者研制的一种新型智能化砂轮在线自动平衡系统。

17. A method of determing the workpiece coordinate system and manual presetting cutter operation are introduced.

介绍数控车、铣床工件坐标系的确定以及与其相关的手工对刀操作。

18. Since January 2007, Lectra automatic cutter sales have risen by 40% compared to the same period last year.

从2007年1月到现在,力克的自动裁剪系统的销量与去年同期相比增长了40%。

19. Pick up laser cutter from airdrop.

从空投地点获取最新式的激光切割机。

20. They are trying their best to reactivate the old coal cutter.

他们正在尽最大的努力使这台旧截煤机重新运转。

21. They are bailing out the cutter.

他们正在把小艇里的水往外舀。

22. He was determined to stick at the job until the new cutter worked properly.

他决心坚持干下去，直到这新的刀具好用为止。

23. He had been a member of the crew of the smuggling schooner Halcyon when she was captured by a revenue cutter.

他把他所知道的生活呈现到了听众的眼前。走私船翠鸟号被缉私船查获时他是船上的水手。

24. He and Cutter at once enter into an excited conversation as to the ownership of a certain steer.

他跟克特立刻上劲地争论有一头阉牛到底是谁的。

25. He departed at a brisk gallop, but on the way met Gethings and Cutter returning.

他轻快地飞跑而去，可是跑到半路上，就碰见葛星斯和克特在赶回来了。

26. The wood cutter led us on until we reached the place of ambush.

伐木工人带领我们继续前进，一直走到伏击地点。

27. With one hand, I can easily clamp the Easy Cutter down enough to cut through three layers of laminated Popsicle sticks.

但只需要一只手我就可以轻松地用“易剪”牢牢夹住并剪断三层厚的层压塑料棍。

28. Yes, but a pattern cutter should have enough knowledge about sketch.

但裁剪师也必需有足够的图纸方面的知识。

29. But the wood cutter never even looked up.

但这个樵夫连往上看一眼都不看。

30. A: All your pattern cutter can read the sketch?

你们的裁剪师都能读得懂图纸吗?

31. All you pattern cutter can read the sketch?

你们的裁剪师都能读得懂图纸吗？

32. Usage: lubricate cutter before starting work, lubricate it every one hour.

使用方法：工作前润滑刀具，每个小时润滑一次。

33. Bevel edge cutter: More aggressive thanks to new blade configuration.

倾斜的切割面：全新的刀片形状使得其更加锐利。

34. Mr. Cutter was in a hurry, and said "No", rather crossly.

克塔先生正忙得不可开交，没好气地说：“不行

35. Easy-disassembly dsign make the door for material incoming. Cutter and breaker filler disassemble very easy.

入料斗、粉碎刀具、筛网钧可轻易拆卸,清洗方便。

36. The binding technique for hob cutter inserts is useful for small and middle tool works.

其中，关于滚刀刀片的粘结工艺对中小工具厂家有借鉴意义。

37. All these will have great help to the designation of cutter and the optimization of milling parameters.

其结果将对球头刀不锈钢铣前参数的优化选择有很大的参考价值。

38. Arch semicircle milling cutter.

凸半圆铣刀。

39. Cutter Intelligent match is a key technology of CAPP system.

刀具的智能选配是CAPP系统的关键技术之一。

40. Cutter and line pressing roller transmissions are primary precise machined gear.

刀和压线?之传动齿?均为一级精密研磨齿?.

41. Keep away from the cutter when it moving to avoid personal injury.

切割器运动时，严禁用手触及，否则会引起伤残。

42. The above paragraph, though as cliche?ridden as a cookie cutter action movie, does have some baring on today's movie.

刚才所说得尽管听起来有些陈词滥调，但作为一个剪辑动作电影的人来讲今天的这部电影有什么可讲的么？

43. It can be used long time, and the cutter can bere-grinding by Several times.

刨刀采用硬质合金，经久耐用，且可多次刃磨刀具，寿命长。

44. The shrill ringing of a bell broke up the card game on the cutter.

刺耳的铃声打散了小汽艇的牌局。

45. The cutter can be mounted like a pennib in a simple holder.

刻刀可象绘图笔一样，固定在简易的刀架上。

46. Peeling length and depth settings cutter, a rotary tuning knob, simple and rapid transformation.

剥皮长度及切刀深度设定，采用微调钮旋转方式，变换简单又快速。

47. Function: Improve the efficiency of machines and extend the life of cutter.

功能、用途：提高机器使用效率，延长刀具寿命。

48. The dynamic testing of cutter wear is the keyin intelligent manufacturing.

动态刀具磨损检测是智能制造配套工程的关键环节。

49. Including: rope, spring wire, steel wire cutter, carbon spring wire.

包括：钢丝绳、弹簧丝、钢绞丝、碳素弹簧丝。

50. Cutter had been so insistent in regard to these details that now she felt uncomfortable about staying there alone.

卡特在这些细节上那么一再叮咛，使她现在感到一个人待在那里心里很不安。

51. Pat or roll dough 1/2” thick.Cut with 2” floured cutter.

压成1/2吋厚，用2”的饼干模压出圆面块。

52. Duplex cutter: A sheeting device which cuts two different sheet lengths from the web simultaneously.

双刀裁纸机:把纸卷切成单张的装置。它能同时切出两种长度的纸张。

53. Duplex cutter A sheeting device which cuts two different sheet lengths from the web simultaneously.

双刀裁纸机把纸卷切成单张的装置。它能同时切出两种长度的纸张。

54. HSS-E annular cutter with weldon shank, 25mm D.O.C.

双削平柄系列超硬高速钢孔钻，切削深度25毫米.

55. HSS-E annular cutter with weldon shank, 50mm D.O.C.

双削平柄系列超硬高速钢孔钻，切削深度50毫米.

56. This unit consists of extruder, machine nose, cutter plate, dynamo, blower, wind conveying u...

发布者：吴晓红所在地：山东青岛市行业：机械及行业设备职位：经理工作年限：

57. Capable to set the sharpening space and time according to paper quality or trimming conditon to ensure sharp cutter.

可依纸质或修边状况设定磨刀时间及间歇，以确保刀片之锋利。

58. Adjustable cutter head: uniquely cyclotron cut-off, double sided cutting edge with a long service life.

可调式刀盘：独创回旋切断，双面刀刃，寿命长久。

59. Milling tools - end mill, face mill, side mill, TC countersinks, Roughing milling cutter and Rapid drills.

可转位切削工具：车刀-刀柄，钻杆、切槽、车螺纹。铣刀-端铣刀、平面铣刀、边铣刀、TC埋头孔、粗齿铣刀以及快速钻孔机。

60. Germany:Milling cutter and indexable inserts of AVANTEC.

台湾：各种刀柄、铣刀及机床附件；

61. Gillard said she hoped she would inspire young Auto electric name card cutter to believe anything was possible.

吉拉德说，她希望能激励澳大利亚的年轻女性相信一切皆有可能。

62. Rewinding、、 dividing and cutting: matching 1575 rewinding、、embossing、、 perforator、、cutter.

四、复卷及分切：配1575复卷压花打孔机、断切机。

63. On the base,it also put forward the suggestion to correct the convex angle size of preshaving hob cutter.

在此基础上,提出了剃前滚刀凸角尺寸修改的建议。

64. In this method, the cutter is mounted in the spindle and brought into contact with the sensor to measure its length.

在这些方法中,刀具是镶嵌在心轴上并与传感器产生连接对其长度进行测量.

65. Combined drill and milling cutter n.

复合钻铣床。

66. The relation between sharpness of chemical fiber cutter blade and the radius of the edge has been investigated.

对超细硬质合金化纤切断刀的锋利度与刃口半径之间的关系进行了研究。

67. The cutter's swept volume could be constructed by lofting a serial of swept profiles.

对这些轮廓线进行放样处理就可以创建刀具的包络面体。

68. As for cutter suction dredge, the cutterhead ...

对采至船上的砂锡矿,用单一的跳汰分选工艺选矿。

69. The heating cutter is coated with TEFLON to prevent it sticking the film.

封切刀上涂镀铁氟龙镀层，有效让刀口不再粘膜；

70. CAD/CAE faces the cutter design of 9LRZ-80 rubbing and cutting machine.

将CAD/CAE应用于9LRZ-80秸秆揉切机切碎器的设计。

71. Place the cutter against the area to be cut and work downward.

将刀片置于要修整的部位并向下移动。

72. The cookie cutter is the class.

小甜饼成型机是类。

73. The press of the cutter is bigger, which engraves the little character without distortion.

小车刀压更大,刻小字不变形。

74. The problems at the capability of the cutter and quality of abrasive wheel existed in our country were discussed.

就我国切割机的性能和砂轮片质量等方面存在的问题进行了讨论。

75. Becoming a famous cutter machinery group at home and abrodad is Fujie's developing target.

建富发展目标：力争建设成为中国驰名.世界著名的刀具机械集团。

76. Arc crown profile,blade cutter setting.

弧形冠部设计，刀翼式分布。

77. And when a planewalker brings the right key.To the right Portal.The cutter can go.Elsewhere!

当一个星际漫游者在正确的传送门前使用了正确的钥匙,他就可以穿过传送门,到达任何地方!

78. While an existing product is operated at the fifth stage,the NON-ELECTRIC cutter can start work at the second stage.

当一些产品操作还停留在第五阶段时，无电气割机已经开始了第二阶段的操作。

79. The third tree felt her heart sink when the last wood cutter looked her way.

当第三棵树发现最后这位樵夫看著它的方式，它的心沉了下去。

80. The cutter was bearing down the channel at 12knots.

快艇以每小时12海里的速度从向风的一侧驶近海峡。