freewheeler

freewheeler

1. All kinds of bicycle parts, such as：saddle, pedal, axle, basket, crank, freewheel, pump and so on.Now we start a new business-complete children bicycle.

(自行车鞍座、脚蹬、三轴、车筐、曲柄、气筒、飞轮、童车等100余种的产品).

2. Type CK-B is a sprag type freewheel non-bearing supported.Nominal dia.

CK-B系列为无轴承支撑外环两端面带键槽的楔块式单向离合器。

3. Description Type CK-C is a sprag type freewheel non-bearing supported.Bearings are required to support axial and radial loads.Units are delivered grease lubricated.

CK-C型号为无轴承支撑的楔块式单向离合器，使用时需要配合轴承安装以承受轴向负载与径向负载，出厂时已加注润滑脂。

4. CKZ series freewheel is shielded by shield bearings on both ends.

CKZ型为内含两套轴承支撑的楔块式超越离合器。

5. Type GC-D is a roller type freewheel non-bearing supported, Earrings are required to support axial and radial loads.

GC-D系列为无轴承支撑滚柱式单向离合器。

6. Description: Type GC-C is a roller type freewheel non-bearing supported.Nominal outer diameter is the same as a series 62 ball bearings.Bearings are required to support axial and radial loads.

产品说明： 型号 GC-C 特性及应用: GC-C系列为无轴承支撑滚柱式单向离合器，外形尺寸与62系列标准轴承相同。

7. The process of cold rolling forming for outer ring of single freewheel of bicycle and the structure of roller and jig, and the parameters for rolling machine have been introduced.

介绍了自行车单级飞轮飞壳冷滚轧成形工艺过程以及轧辊的结构、夹具形式和轧机参数。

8. From 1965 to 1970, "High-Risers" or "Sting-Rays" were a hot item in the US The more expensive models had a five-sprocket freewheel with a "Stick-Shift" lever mounted on the top tube.

从1965年到1970年，“高层建筑”或“斯汀射线”，但在美国的一个热门项目的更昂贵的机型曾与“大棒5链轮飞轮移”杠杆上管上安装。

9. This freewheel is primarily designed for overrunning and backstop which used in crane and transport machinery, metallurgical and mining machinery.

传递较大转矩，适用多种工况下的超越和防止逆转场合。常用于纸箱、起重运输、冶金矿山、石化、水泥等机械。

10. The paper analyzes the relationship between position phase error and freewheel current of silent phase.It is noted that freewheel current error can exactly reflect position phase error.

分析位置信号相位与非导通相续流电流的关系，指出非导通相续流电流偏差能够准确地反应无位置传感器无刷直流电机位置信号相位误差。

11. Keywords single freewheel;cold rolling forming;

单级飞轮;冷滚轧成形;

12. Thank you,Freewheel ,for your enjoyable writings!

后生可畏；后生可贺！

13. Stationary training equipment - Part 10: Exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods

固定训练设备第10部分:有固定车轮或无滚轮的健身车额外特定安全要求和试验方法

14. If you came into a bike store with a poor shifting Simplex or Huret derailleur or a sick Regina or Cyclo freewheel, the standard repair was to replace it with SunTour.

如果你走进一家自行车商店带着一个贫穷的转变单纯或呼热图变速器或生病里贾纳或环状飞轮，标准的修复工作，以取代它与山图。

15. SunTour also made a combined freewheel plus rear hub, called Unit-Hub, in 1969 for small wheel bicycles.

山图也发了联合飞轮加上后轮，称为股枢纽于1969年，小轮自行车。

16. SunTour's 1980 New Winner freewheel offered complete flexibility.

山图的1980年新的优胜者飞轮提供全面的灵活性。

17. freewheel during the commutation

换相续流

18. We need special made bike freewheel with 2 to 4 pairs clicks.We need company with high product quality and good design ability.Annual order: 2000,000 sets.

本信息价值5点积分,建议回复日期2007-09-20之前,还可被浏览17次如果您是本网注册会员，请登录后查看联系方式。

19. Keywords Machinery manufacture;Freewheel;Cold rolling forming;

机械制造;飞轮;冷滚轧成形;轧辊;

20. Insight and creativity, perhaps even genius, do seem to be linked to a brain that can disorganise itself and freewheel, making new and unexpected connections.

洞察力、创造力甚至还有天才似乎真地和一个能够“瓦解'自我、无拘无束思考、建立意料之外新连接的大脑有关联。

21. freewheel downhill

滑行下坡

22. Kinematics and Dynamics Analysis on Jaw Freewheel Differential

牙嵌式自由轮差速器的运动学与动力学分析

23. Description Type CK-B is a sprag type freewheel non-bearing supported.Bearings are required to support axial and radial loads.Units are delivered grease lubricated.

特性 CK-B型号为无轴承支撑的楔块式单向离合器，使用时需要配合轴承安装以承受轴向负载与径向负载，出厂时已加注润滑脂。

24. 17. coast in a vehicle using the freewheel.

用自由飞轮坐交通工具沿海岸而行。

25. Description: Type GC-A is a roller type freewheel non-bearing supported.Nominal outside diameter is a standard ball bearing dimension.

系列为无轴承支撑滚柱式单向离合器，外部尺寸与标准轴承尺寸相同。

26. Level3: Tolerance matching of freewheel bushings. Factory only.

级别3：飞轮轴套的公差矫正。只有工厂可以操作。

27. Run sway the drift charging vehicle video frequency for my freewheel!

给我一个飞轮跑跑摇控车的漂移视频!

28. freewheel hub with back pedal brake

脚刹式飞轮毂

29. freewheel mechanism

自由回转机构

30. bicycle freewheel

自行车飞轮

31. Cold Rolling Forming for Outer Ring of Single Freewheel of Bicycle

自行车飞轮飞壳的冷滚轧成形工艺

32. saddles,front&rear axis,medium axis,freewheel,pedals,baskets,crank and fittings

行业类别：自行车配件交通运输有效期限：2020-12-12

33. The jockey pulley tracked the angle of the freewheel sprockets and maintained a nearly constant distance (chain gap) between the jockey pulley and the sprocket.

赛马滑轮跟踪了飞轮链轮的角度，保持着几乎恒定的距离（链差距）与辅轮和链轮在接下来的20年。

34. This was the beginning of the Japanese derailleur and multi-sprocket freewheel industry.

这是日本变速器和多开始，链轮，飞轮产业。

35. Whether you want to climb mountains in Tyrol or carve up the slopes in the Alps, freewheel along the Danube or paddle the raging Inn River, Austria"s your one-stop shop!

进口以能源和其它工业原料为主，出口以钢铁、机器、交通工具食品为主。主要贸易伙伴为德国、意大利、瑞士以及俄罗斯、中国等。

36. By narrowing the sprockets, spacers, and chain width, they made a 6-speed freewheel that was the same width as a 5-speed and fitted on a 120-mm hub.

通过缩小链轮，垫片，和连锁宽度，也提出了6速飞轮这是作为一个5速和1120毫米枢纽配备相同的宽度。

37. By applying principle analysis of freewheel differential gear system and (kinematic) analysis, an alligator freewheel differential gear system is presented to solve the above problems (exi.

通过自由轮差速系统的原理分析、运动分析和理论力学分析,力求通过牙嵌式自由轮差速器这一简捷方式,解决常规四轮驱动方式下差速系统存在的诸多问题。

38. Derailleur sales went hand in hand with multi-sprocket freewheels. SunTour's Perfect freewheel was a first class design with three splined sprockets and two or three threaded sprockets.

避震销售齐头并进的多链轮飞轮。山图的完美飞轮是一位有三个花键链轮和两个或三个线程链轮一流的设计。

39. Partially insert freewheel (with pawls), check correct pawlspositioning/engagement, insert freewheel, tighten right axle end.

部分插入塔基（包含棘爪），检查正确的棘爪和棘轮的位置，在全部插入塔基，锁紧右侧的轴端盖子。

40. Tighten left axle-end, insert freewheel (without pawls), tighten right axleend.

锁紧左侧的轴端盖子，插入花鼓本体（没有棘爪），锁紧右侧的轴端盖子。