inwall

inwall

1. Adopting rotating spurge pipe achieve anti-freeze fluid uniformity sprinkling of train wagon inwall.

仓口喷液装置主要是为了给通过下煤仓口进入煤车的煤喷防冻液，与下煤仓口实行联动。

2. Under the condition that the tension stress does not arise in the female die inwall, which can be defined as target function.

以凹模内壁不允许出现拉应力为目标函数,用计算机进行优化设计出组合凹模各圈尺寸,从而获得优于传统计算的最佳设计参数。

3. "For example, cooling water circulates constantly through the tuyere, hearth staves, bosh and inwall cooling plate etc. "

例如，冷却水不停地在风口、炉身、炉腹和内壁冷却板等部位循环流动。

4. inwall decorating

内壁装饰

5. Widely thin area,even dotted pitting and holes were found on the inwall near the liquid entrance and exit.

在运行中其下塔靠近液体入口和出口处附近的内壁面上出现局部减薄、坑点及穿孔,严重影响了设备的安全服役。

6. Keywords Small-caliber;Inwall;Vibration;Derust;

小口径;内壁;振动;除锈;

7. But when a Mo foil is placed on the inwall of the reaction crucible, the final content of carbon in Fe-C droplets can reach a very low level.

当反应坩埚内壁衬有金属钼片时，金属颗粒的终点碳含量可以降到极低的水平。

8. Abstract： The aluminium pick up of stem in extrusion is one of the causes of inwall defects of the extruded aluminium alloy pipe.

摘 要： 穿孔针粘铝是造成铝合金管材挤压时产生内表面擦伤缺陷的主要原因之一。

9. It changes the existing model, solves the uniformity sprinkling problem of the train wagon inwall, saves the anti-freeze fluid and depress the costs.

本装置的一个突出特点就是制作成本低，实用性强，相比现有的喷液设备，本装置采用了创新性较强的旋转喷液管结构。

10. An inner video imaging apparatus for tubing inwall damage is developed.

根据实际检测和统计分类，将内壁损伤规则化为沟槽、孔洞和片蚀三种类型。

11. Load spectrum determination of tubing inwall proves the tubing is acted by the axial alternating load in a rod pumped well, and all the fractures are located at the root of the tooth.

油管内壁载荷谱测定进一步明确了油管在工作状态下承受轴向拉-拉交变载荷,其断裂部位全部在应力集中的齿根处。对油管断口进行了宏现和微观形貌分析。

12. Load spectrum determination of tubing inwall proves the tubing is acted by the axial alternating load in a rod-pumped well, and all the fractures are located at the root of the tooth.

油管内壁载荷谱测定进一步明确了油管在工作状态下承受轴向拉-拉交变载荷，其断裂部位全部在应力集中的齿根处。

13. bottom inwall line

炉腰水平线

14. top inwall line

炉身水平线

15. Effect of the Flow to the Erosion-Corrosion of the EO Stripper Inwall

物料流动对环氧乙烷解析塔磨损腐蚀的影响

16. (Charateristic:A reflex layer on the bulb inwall;light-focusing desing;high luminous efficiency;

特 点 ：玻壳内壁有反射层及聚光设计，发光效率高、光线集中、寿命长、光色好。

17. The ball type paraffin removal unit has low reliability in moving; while the tooth type unit has the disadvantages of teeth being apt to break and causing damage of tubing inwall.

球型清蜡器的主要缺点是运动的可靠性差，一旦钢球丧失锁紧功能，将失去“步进足”的作用；而齿型清蜡器的步进齿易破损及齿尖易刺伤油管内壁。

18. The aluminium pick up of stem in extrusion is one of the causes of inwall defects of the extruded aluminium alloy pipe.

穿孔针粘铝是造成铝合金管材挤压时产生内表面擦伤缺陷的主要原因之一。

19. In natural gas pipeline, corrosive medium exist, inwall will be corroded for ever.

管输的天然气中均带有腐蚀性物质，势必会腐蚀管线内壁。

20. Influence of Adhesive Work Between Inwall and Liquid Upon Flow Resistance in Smooth Straight Conduit

粘附功对光滑直管内流动阻力的影响

21. while the tooth type unit has the disadvantages of teeth being apt to break and causing damage of tubing inwall.

而齿型清蜡器的步进齿易破损及齿尖易刺伤油管内壁。

22. Train wagon anti-freeze fluid sprinkling machine is to solve the anti-freeze fluid sprinkling of the coal conveyor wagon inwall.

该机械结构考虑了实际生产情况，降低了生产成本，达到了经济实用的目的。

23. Small-caliber pipe inwall's derusting is a urgent problem of morden factory.Produce a method to mainly apply to small-caliber pipeline inwall.

针对小口径钢管内壁除锈难的问题,研究一种适用于小口径钢管内壁振动除锈的工艺方法。

24. In the light of the inwall depression in the process of tubular intermediate upseting, a parallel velocity field model with depression is established.

针对管坯中部锻锻变形过程中产生的内壁凹陷现象，建立了含凹陷的平行速度场模型。

25. Construction Process of Inwall in Steel-Shell Equipment

钢壳设备内衬砖板的施工过程

26. Arc spraying technology of cylinder inwall in railway locomotives

铁路机车缸套内壁电弧喷涂工艺

27. Study of Inwall Spiral Defect of Extruded Alloy Pipes

铝合金挤压管内表面螺旋纹状擦伤缺陷研究

28. Study of Pressing Graphite Inwall Defect of Aluminium Alloy Pipes during Extrusion

铝合金管挤压时内表面石墨压入缺陷的研究

29. The spot inwall defect of aluminium alloy pipes during extrusion is one of the defects that only occur in the process of extrusion without lubrication.

铝合金管材挤压时在其内表面产生的点状擦伤，是无润滑挤压过程特有的一种表面缺陷。

30. The inwall spiral defect of aluminium alloy pipes during extrusion is a kind of serious defect that obey some laws.

铝合金管材挤压时在其内表面产生的螺旋纹状擦伤，是一种有规律性的严重表面缺陷。