keyway

keyway

1. subocclusal keyway

[医] Ж下环状栓道

2. tapering keyway

[医] 锥状栓道

3. Keyway people are proud of their best quality ‘Varlon’ products.

“慧霖”牌是令“奇威人”骄傲的皇牌产品。

4. three-lip keyway cutter

三面刃键槽铣刀

5. Keyway milling cutters with morse taper shank

产品名称:莫氏锥柄键槽铣刀

6. Artificial concrete keyway

人工键槽

7. Align keyway sleeve with motor drive keyway slide motor towards pump, ensure the pump coupling and motor flange are correctly engaged.

使马达驱动端的(外)键槽和(联轴器)的套式内键槽对准于一直线上,将马达滑向泵,确保泵联轴器和电机的法兰盘正确结合.

8. Keywords 300M steel Internal keyway;Power unit Grinding;

关键词300M钢;内键槽;动力头;磨削;

9. Keywords deep hole and long keyway;slotting;precision;

关键词深内孔键槽;插削;精度;

10. internal keyway

内键槽

11. Re-Dissertation on Measurement and Calculation of Single Keyway Symmetry Error

再论单键键槽对称度误差的检测与计算

12. spline a keyway

切出键槽

13. chip off the cracks to sound metal and then built up by welds, also the keyway. After that, it is to be annealed and recut a new keyway.

刨掉裂纹至缺陷消除,然后补焊,销槽也按照此方法处理,做完这些,要进行退火处理和重开一个新的销槽

14. Improvement is made to the positioning feller gauge in flywheel keyway broaching machine by V-type auto center align.

利用V型块自动对中定位原理,对飞轮键槽拉床定位塞尺进行改进。

15. An old long lathe is changed to LJ8510/CGL type keyway broaching machine.

利用旧车床改装成LJ8510/CGL型键槽拉床,符合绿色制造减小回收成本的要求。

16. Features free-spinning keyway to prevent wrench attacks, but easy to turn when correct code is entered.

功能特点免费纺键槽，以防止扳手对锁面的破坏，但拥有正确的代码, 进入屋子是十分的方便。

17. Widened flat body keyway broach types and dimensions

加宽平刀体键槽拉刀型式与尺寸

18. woodruff keyway milling cutter

半圆键槽铣刀

19. reference keyway

参考键槽

20. The measurement and calculation on double keyway symmetry examinations

双键槽对称度误差的测量与计算

21. Different bores with keyway are available in metric and in inches.

可以提供不同内孔及键槽

22. key and keyway

可动性架工义牙连接装置(牙)

23. h. A keyway slot must be on parallels for centering die on bolster. 1.020” wide and 1” deep.

在垫脚上应提供将模具定位在台面上键槽（1.020”宽宽1”深）

24. A Instrument for Measuring Symmetry of Keyway in the Hole Based on Benchmark Changing

基于基准互换的孔内键槽对称度检测量具

25. The most common improper reproductions of the RI emblem have the keyway missing from the center, the center of the wheel filled in, or the emblem partially covered.

复制国际扶轮徽章最常见的错误是中央的钥匙孔不见了、齿轮的中央被填满、或徽章的某部分被遮盖。

26. A keyway is machined on the outer race for the connection to the drive or drive member centered on its outside.

外环有键槽用来与驱动件或被驱动件结合，并以外环为固定中心线。

27. Keywords multi supporting revolving kiln operating axis zero strain keyway phase measurement;

多支承;回转窑;运行轴线;零应变方向;键相测量;

28. Keywords Large rotary part Operating axes Dynamic measuring Keyway phase measure Portable system;

大型回转体;运行轴线;动态测量;键相法;便携式系统;

29. Lathe for Milling Female Keyway of Large-scale Structure Part

大型结构件孔内键槽铣削专用机床研制

30. The improved design of keyway for the large diameter gear

大直径齿轮键槽的改进设计

31. shell radial keyway cutter

套式弧形键槽铣刀

32. Design of measurer for azimuth request between hole keyway and gear tooth

孔内键槽与齿有方位要求的量具设计

33. The failed keyway broach was analysed by chemical analysis, hardness testing and metallograph-ic examination.

对断裂单键拉刀进行了化学成分分析、硬度测定和金相检验。

34. Keyway broach with chamfer types and dimensions

带倒角齿键槽拉刀型式与尺寸

35. Flat body keyway broach types and dimensions

平刀体键槽拉刀型式与尺寸

36. slot and keyway milling machine

开缝键槽铣床

37. end-milled keyway

成形键槽

38. shank with tang and keyway

扁尾键槽刀柄

39. Abstract： Pointing to the accuracy requirement of the keyway on shifts,this paper presents a special jig and a cutter positioning method.

摘 要： 针对轴类零件键槽精度的要求，介绍了一种专用夹具及对刀方法。

40. 8.Abstract: Pointing to the accuracy requirement of the keyway on shifts,this paper presents a special jig and a cutter positioning method.

文摘:针对轴类零件键槽精度的要求，介绍了一种专用夹具及对刀方法。

41. The toolholder is used for outer slotting and the tool bar for inner slotting and for slotting the keyway.

机床附有电磁自动抬刀的刀架和刀杆。刀架用天外插削，刀杆用于内插削和插键槽。

42. Standard version: output shaft with keyway (with the exception of models PHD, PHS and PHR with cylindrical shafts).

标准产品:输出轴带键槽(但是,型号PHD,PHS,PHR是圆柱轴,不带键槽).

43. Standard version: output shaft with keyway.

标准产品:输出轴带键槽.消声器可拆除.

44. Keyway this mill special plane to for mill long keyway mere thick stick part, can mill of different widths keyway specially.

此键槽铣专机是专为铣长键槽光杠类零件，并可铣各种宽度的键槽。

45. Study on Ultrasonic Test of Turbine Vane Wheel Keyway

汽轮机叶轮键槽模拟裂纹超声波检测

46. deep hole and long keyway

深内孔键槽

47. dovetail keyway

燕尾键槽

48. subocclusal circular keyway

牙合下环状锁槽

49. armature keyway

电枢轴键槽

50. straight shank keyway milling cutter

直柄键槽铣刀

51. side keyway

端面键槽

52. Something like a feather; esp. in mechanics, a flange for stiffening a casting or a key such as fits into a keyway.

羽状物(尤指机器上加强轫度的肋片或嵌入键沟的楔栓)。

53. Machining Keyway of Under Oil Electric Pump Impeller with HOmemade Pushing Broach

自制推刀工潜油电泵叶轮键槽

54. spline and keyway miller

花键与键槽铣床

55. Morse taper shank keyway cutter

莫尔斯锥柄键槽铣刀

56. This paper discusses the cause of keyway symmetry error produced and test method and approaches to related calculating formulae.

论述了键槽对称度误差的产生原因以及检测方法，并对有关计算公式进行了探讨。

57. The design and apply of a lathe work holder for milling keyway

车床铣削键槽工装设计及应用

58. spindle keyway

转轴上的键槽

59. The feed rod, which contains a keyway throughout most of its length, passes throughthe two reversing bevel pinions and is keyed to them.

通过手轮和螺杆，尾座套筒可以在尾座体中纵向移入和移出几英寸。

60. Metal-cutting Tools; Hobs for Spur Gears, with Clutch Drive Slot or Keyway, Modules 1 to 20

金属切削刀具。正齿轮用带横向键槽或纵向键槽的滚铣刀。模数1至20

61. Pointing to the accuracy requirement of the keyway on shifts,this paper presents a special jig and a cutter positioning method.

针对轴类零件键槽精度的要求，介绍了一种专用夹具及对刀方法。

62. Broaching device for equal-deep keyway in taper hole

锥孔内等深键槽拉削装置

63. taper shank keyway milling cutter

锥柄键槽铣刀

64. key and keyway attachment

键与键槽式固位体

65. keyway cutting

键槽切割

66. keyway planer

键槽刨床 刨槽机

67. keyway planing machine

键槽刨床

68. keyway symmetry

键槽对称度

69. Keyway Symmetry Error and Test

键槽对称度误差及其检测

70. keyway broach

键槽拉刀

71. Technical specifications for keyway broaches

键槽拉刀通用技术条件

72. Keywords keyway broaching machine;structural stability;double direction constrictive bending combinatory component;

键槽拉床;结构稳定性;双向压弯组合式构件;

73. keyway slotting tool

键槽插刀

74. keyway slotter

键槽插床

75. keyway slotting machine

键槽机

76. keyway chisel

键槽用凿

77. Was the keyway created using a min arc condition dimension of .0.63?

键槽的生成是用了0.63最小圆狐的尺寸条件。

78. keyway cutter

键槽铣刀

79. keyway fraise machine

键槽铣床

80. keyway file

键槽锉