nsec

nsec

1. d.setUTCMinutes( nmin,nsec ) ;

// 设置 UTC 分钟。

2. d.setUTCSeconds( nsec , nmsec ) ;

// 设置 UTC 秒禾扣毫秒。

3. In the 10- or 25-nsec range, RV2, which is 0 nsec in the range, to get a midscale reading.

你必须能够建立正向传导条件、阻断状态和两者之间的转换。

4. Now, you have eliminated the effect of VF.You can adjust the 0 nsec by shorting Adjust testpoints 1 and 4 and adjusting RV2 to read zero on the 10-nsec range.

你自己来检查反向恢复时间是有利的，不过，前提是要做的测试是简单明了的。

5. 40 nsec. 40 nsec.

切换速度： 40 nsec.

6. By switching the feedback clock from one delay cell to another, the equivalent number of delay cells is changed, and the output frequency will hop to a different band within 9.5 nSec.

我们提出了一个可以改变倍频数的频率倍化器。利用切换不同的回授讯号，即可改变倍频数。因此输出频率即可在9.5奈秒内切换至不同的频带。

7. The NSEC is sparing no efforts to cultivate new markets in the rest of the country, especially the western regions.

挪威海产品出口委员会正在不遗馀力地培养国内其他地方新的市场，尤其是西部地区。

8. If you lack access to such a diode, you can always arbitrarily shift the value by 1.5 nsec.

注意使反向恢复时间变短不一定很好。

9. If you need an absolute accuracy down to the picosecond, you have to test a known, ultrafast diode, such as an FD700 or a BAY82, and adjust the 0 nsec to read the actual value.

（由于测试参数联合的个数，一个数据的直接对比是基本不可能的）。