polyamide

polyamide

1. ASTM D 789-98 provides an official, standardized procedure for testing polyamide or nylon molding powders.

98标准提供了一个测量聚酰胺/尼龙铸造模粉粘度的标准方法。

2. The DK series products are some king of cationic resin whose main com-ponent is polyamide resin.

DK系列是以聚酰胺树脂为主要成分的阳离子树脂,DK-856是具有优良效果的抗水剂;

3. Housings of series FYK 5 and FYTBK 5 are injection moulded from a glass fibre reinforced polyamide 6 material.

FYK 5和FYTBK 5系列轴承座是用玻璃纤维加强聚酰胺材料通过注塑工艺制成。

4. SCHAETTI FIX thermoplastic powders are produced by grinding plastics materials, such as polyamide, polyester, polyurethane, polyethylene and EVA's.

SCHAETTI FIX 热塑性粉末是由塑料材料磨碾而成，例如聚酰胺纤维、龙/脂、胺脂、乙烯和eva等。

5. It's a two-component, polyamide cured epoxy paint, pigmented with micaceous iron oxide (MIO).

一种用云母氧化铁颜料配制而成的双组份聚酰胺固化环氧涂料。

6. Working with a leading polyamide expert, such as Rhodia, will provide access to its specialized expertise and its global industrial recycling network.

与聚酰胺行业领先的专家合作，罗地亚将提供专业的知识和全球工业可循环网络。

7. Line of pure dacron specializing in various kinds of specifications、The whole cotton thread, nylon line, polyamide fibre line.

专业生产各种规格的纯涤纶线、全棉线、尼龙线、锦纶线。

8. Tow cutting machine is the introduction of foreign advanced technology design and manufacturing, is polyamide, rayon, nylon fibers, such as ultra-short fine villi cutting the ideal machine.

丝束切割机是引进国外先进技术设计制造的，是聚酰胺、粘胶、锦纶等纤维超短细旦绒毛切割的理想机器。

9. Sole is wear-resistant, skidproof and high-density synthetic rubber.Middle sole is shock-absorbent polyamide pad which contains carbon, and makes it stable.

中底部分采用减震碳尼龙的支撑片,保证鞋掌曲折控制、承托受力，保证稳定性。

10. Therefore, three systems were studied by adding soft polyolefins to polyamide in this paper. They are PA6/POE-g-MAH, PA6/EVA and PA6/POE/EAA blends respectively.

为了改善尼龙的韧性和柔软性，本文采取双螺杆反应挤出技术，将尼龙与弹性体进行混合，系统研究了PA6/POE-g-MAH、PA6/EVA和PA6/POE/EAA三个尼龙6的共混体系。

11. To minimize the environment pollution caused by the waste caprolactam and polyamide 6,the effects of ultraviolet onPhanerochaete chrysosporium(p.

为减少废弃己内酰胺及聚酰胺6对环境的污染,采用紫外线对白腐菌进行诱变,以提高其对己内酰胺的生物分解和对聚酰胺6的生物降解性能。

12. It's a two-component epoxy polyamide cured conducting electrostatic paint.

为双组份环氧聚酰胺固化的导静电漆。

13. Info:Tank Top &Pants for fitness activities Fabric: Certified polyamide supplex Sizes: small (S) ......

主要材质:维纶次要材质:维纶尺码:全码适用人群:女人

14. Polyamide Resin, Petroleum Resin, Maleic Resin, Nitrocellulose solutions and etc.As for machinery you can visit our Booth No.

产品种类众多，有树脂如聚酰胺树脂、马林酸树脂、石油树脂；

15. Cross-wovens with a polyester warp and polyamide weft have become more popular in recent years, even though they are difficult to dye.

介绍了以聚酯纤维为经纱,聚酰胺纤维为纬纱的交织物染色时对染料和工艺的要求。

16. This paper introduces the requirements of polyamide resins derived by dimer acids and diamines as primary raw,ap-plied printing ink and the situation at home and abroad and the trend of development.

介绍了由二聚酸与二元胺为主要原料生产的聚酰胺树脂用于油墨的条件、国内外情况及发展趋势。

17. The article described the development and testing of the dye fixative agent for polyamide fiber fixed with acid dyes.

介绍了酸性染料染聚酰胺纤维固色剂的研制与测试。

18. Arkema has developed this kind of polyamide powders for their solvent and heat resistance as well as their hardness.

代表一个系列的超细聚酰胺粉末，它是由十二内酰胺和/或己内酰胺聚合而得到。

19. The intumescent flame retardant(IFR) including melamine phosphate(MP),pentaerythritol(PER) and polyamide 11(PA11) were used to flame retardant high density polyethylene(HDPE).

以氮磷复合型阻燃剂三聚氰胺磷酸盐(MP)以及小分子成炭剂季戊四醇(PER)和大分子成炭剂尼龙11组成的膨胀型阻燃剂体系阻燃高密度聚乙烯(HDPE)。

20. The kinetics of surface dispersion of composites based on aromatic polyamide is related to the macromolecular depolymerization on the surface layer of the polymers.

以芳香族聚酰胺为基质的复合材料，其表面弥散的动力学与树脂表面层大分子的解聚有关。

21. Maleic anhydride grafted polyethylene or ethylene-propylene-diene rubber used as compatibilizer improved impact strength and reduced percent of water absorption of polyamide 6/polyolefine blends.

以马来酸酐接枝聚乙烯和三元乙丙橡胶为界面相容剂,研制的尼龙6/聚烯烃共混物,提高了冲击强度,降低了吸水率。

22. A low Mw polyamide resin is reacted with ethyl acrylate dicarbamate to form a comb-type prepolymer with polyamide as backbone chain and ethyl acrylate dicarbamate as side chain.

低相对分子质量的聚酰胺树脂和丙烯酸乙酯氨基甲酸酯基一异氰酸酯通过加成反应制得以聚酰胺为主链、丙烯酸乙酯二氨基甲酸酯为侧链的梳型预聚物。

23. Material type specified on label as polyamide application of naked flame to webbing and thread resulted in melting consistent with synthetic material.

作为明火的聚酰胺应用，在标签上材料类型说明了与人造材料相熔会呈网状和线状。

24. The discharge print by using stannous chloride can be possible on polyester, Acetate, Triacetate, Polyacrylic and its blend with Polyamide fabrics.

使用分散染料的机织织物和针织坯布的印花可能伴随着高压蒸。高温蒸煮过程中，为了更好的洗涤，硫酸铵和氯酸钠的添加是被推荐。

25. The influences of the arylated alkyl amine and conventional polyamide curing agent on the performance of light epoxy antistatic coatings were studied respectively.

使用导电云母粉研制浅色环氧防静电涂料,不仅导电粉的选择至关重要,环氧固化剂的选择也非常关键。

26. The cage which retains the cylindrical rollers of the cylindrical roller thrust bearing is an injection moulded glass fibre reinforced polyamide 6,6 cage (fig 6).

保持圆柱滚子推力轴承圆柱滚子的保持架,是注射成型的玻璃纤维增强聚酰胺6.6保持架(图6)。

27. The project is intended to remise the Polyamide 6 Curtain Cloth Production Line.

全资出让锦纶6帘子布生产线，由投资者成立独资公司;

28. As a nylon engineering plastics experts in automobile and leading provider, Rhodia Polyamide can provide innovative solutions for the application of nylon in this area.

其功能是为发动机各缸提供充足而均匀的混合气，同时为主要的传感器和执行器提供结构支撑。

29. It discussed the property modifications of polyamide from different aspects, such as reinforcement, toughening, flame retardance and anti-static of polyamide, and nanometer nylon etc.

分别从不同的方面对聚酰胺的高性能化进行了探讨,例如聚酰胺的增强、增韧、阻燃、防静电以及纳米尼龙等。

30. Why the coated fiber paper of aromatic polyamide is suitable for the insulation of magnetic-pole coil is analyzed and the paper app lied to the turn-to-turn insulation and pole body insulation of magnetic-pole coils is introduced.

分析了上胶聚芳酰胺纤维纸适用于磁极线圈绝缘的原因,介绍了上胶聚芳酰胺纤维纸在磁极线圈匝间绝缘和极身绝缘的应用情况。

31. Manufacture of home cleaning items: polyester, microfibre, polyamide cloths for floors and...

分类标题：工业清洗和保养产品|扫帚...

32. The graft copolymerization of acrylamide monomer onto polyamide polyamine epichlorohydrin(PAE) was performed in solution polymerization process.

利用溶液聚合的方法,使丙烯酰胺单体与不饱和聚酰胺多胺环氧氯丙烷树脂接枝共聚。

33. The inclusion of polyamide and alkyl ketene dimmer improved the mechanical properties of methylcellulose, especially the wet tensile strength.

力学性能测试表明,聚酰胺、烷基烯酮二聚体能够明显改善纤维素复合膜的力学性能,尤其是湿态拉伸强度。

34. Two roller guided cages of polyamide 6,6 or pressed steel.

双滚子引导的尼龙66或冲压钢保持架。

35. It's a two component, polyamide cured epoxy zinc rich primer.

双组份富锌环氧聚酰胺固化的底漆。

36. It's a two-components, polyamide cured epoxy coal tar coating. Film fades in aliphatic solvents.

双组份聚酰胺固化的环氧煤焦油涂料。在脂肪族溶剂中漆膜会引起褪色。

37. Two-component, epoxy polyamide primer.

双组分环氧聚酰胺底漆。

38. In addition, polyamide exhibits excellent thermomechanical and electrical properties that enable the electrical and electronic industry to increase the equipment performance.

另一方面,聚酰胺材料出色的热性能和电性能可确保电子电器工业不断提高产品性能。

39. Can be used for cotton, linen, nylon, polyamide, polyester, and other raw materials to weave high-grade clothing, curtains, tablecloths, footwear, bedding, sofa sets, gifts, and other decorative lace.

可使用棉、麻、尼龙、锦纶、涤纶等原料，编织各种高档服饰，窗帘、抽纱台布、鞋帽、床上用品、沙发套、礼品等装饰花边。

40. It can be applied to product core yarn , covering yare, twist yarn with polyester, polyamide or cotton .

可适用与棉、锦纶、涤纶等混纺。

41. It has serial products including varieties of polyamide staple yarn(thread),polypropylene filament(thread),polypropylene,polyster ,polypropylenen/polyster blend etc.

品种有锦纶复丝（线）、丙纶长丝（线）、涤纶、丙纶/涤纶混合等系列产品。

42. Rhodia Polyamide will display this innovation on booth H01 in Hall W3, at Chinaplas2008.

在2008国际橡塑展上，罗地亚聚酰胺将在W3展厅H01展位上展示这一创新的产品系列。

43. Rhodia Polyamide will display this innovation on booth H01 in Hall W3 at Chinaplas2008.

在2008年中国国际橡塑展上，罗地亚聚酰胺将在W3展厅H01展位上展示这一创新的产品系列。

44. The aperance and the mechanic properties of epoxy resin and low molecular polyamide adhesive system would be affected by the addition of mannich amide.

在低分子聚酰胺树脂固化环氧树脂的体系中,通过添加一定量的酚醛胺固化剂,直接影响该体系的表观及固化物力学性能。

45. The production of polyamide 6 will also be discontinued at Rudolstadt, in the German state of Thuringia by end 2010, BASF said.

在尼龙6生产也将停止在鲁多尔在德国图林根州，2010年年底，巴斯夫说。

46. In polyamide 6, unmodified silica nanoparticles increase the crystallization rate of the matrix while modified ones degrease it [8].

在聚酰胺6 ，修改增加纳米二氧化硅结晶速率的矩阵，而修改的脱脂它[ 8 ] 。

47. Another sheet of special polyamide hot-melt adhesive was plated onto this composite material to fabricate cable connecting accessories.

在该复合材料的内侧再复合上特种聚酰胺热熔胶，作必要的后续成型处理后，即制成增强型通讯电缆用热缩接续附件。

48. Composite spinning series: orange petal-shaped, skin-core form, parallel to the island polyamide fiber composite and specifications.

复合纺系列:桔瓣形、皮芯形、并列形涤锦复合以及各种规格的海岛纤维。

49. Bearing with steep contact angle, matched inner rings, injection moulded segment cages of polyamide 6,6.

大接触角轴承,配对内圈,注模尼龙6,6分段保持架。

50. Providing the composite world with a wide range of peel ply fabrics - plain or twill woven Polyamide or Polyester fabrics, (with or without tracing yarns) are dyed (optional), scoured, and heat-set.

奥尔泰已成为国内最主要的辅助材料供应商之一，并被二十多家国内航空航天关键企业和研究机构列为合格供应商。

51. The toughness, rigidity, crystallinity, and thermal resistance of polyamide resins are due to the strong interchain attraction caused by the polarity of the amide groups.

如果材料是用防水材料包装 供应的，则容器应保持密闭。

52. They are often the same thermoplastic resin such as EVA, EEA, polyethylene, polyamide, polyester and other admixtures.

它们通常同热塑性树脂如EVA、EEA、聚乙烯、聚酰胺、聚酯等掺合。

53. The rheological properties of dynamically vulcanized NBR/petroleum fermented polyamide(PFPA)TPE were in vestigated.

对动态硫化NBR/石油发酵尼龙(PFPA)共混型热塑性弹性体的流变性能进行了研究。

54. The market present situation and developing in domestic was analyzed the suggestions about how to develop polyamide engineering plastics in China hereafter were made.

对国内聚酰胺工程塑料的市场现状及前景作了分析,并对我国聚酰胺工程塑料发展提出了建议。

55. The properties of important tissue engineering materials when planted into the body, such as polyhydroxyalkylester, polyanhydride, polyamide, were reviewed in detail.

对所使用的组织工程材料,重点讨论了聚羟基烷基酯,聚酸酐,聚酰胺的研究进展与性能。

56. The polyamide to easy generation salivate (PA) , through choosing form of a powerful person hot nozzle also can realize hot flow path to shape.

对易产生流涎的聚酰胺(PA)，通过选用阀式热喷嘴也能实现热流道成型。

57. Which was hot pressed between a polyamide film and a Cu-foil to show peeling strength 1.25 kg.cm, vs. 0.30 kg.cm, for a similar compn. not contg. SBR.

将该薄膜夹在一层聚酰胺薄膜和一层铜箔之间并热压,与不含丁苯橡胶的类似物相比,该粘接剂粘接的聚酰胺薄膜和铜箔之间的撕裂强度从0.3kg/cm提高到了1.25kg/cm。

58. The progress of morphological structure,compatibility,rheological properties and mechanical properties of polyamide blends made in China are reviewed.

就近年来国内聚酰胺共混物的形态结构、相容性、流变行为、力学性质四方面的研究进展作一综述。

59. Nylon; polyamide (pa.

尼龙;聚醯胺

60. Polyamide lock-cover, for profile cylinders and round quarter-turns. Opening angle 180o. Cover is locked by small quarter-turn.

尼龙锁盖，用于型钢圆柱形锁芯和圆形直角回转锁头张开角180o，由小直角回转结构锁住锁盖。

61. Nilit is a global manufacturer of nylon6.6 polyamide fibres for fashion bodywear, activewear, legwear and intimate apparel.

屹立是锦纶66纱线的全球生产商。其锦纶产品在潮流服饰、运动服装、丝袜及内衣方面都有广泛应用。

62. To be mentioned in development of advanced special products are the highperformance polyethylene fiber, the sophisticated polyamide 46,and a production process for RIM Nylon.

已开发的先进的特种制品有高性能聚乙烯纤维,尖端的聚酰胺46,和反应注射成型尼龙等。

63. The products of our company are as following: all kinds of colours and types of polythene threads(6-70strands);all kinds of fishing gears, breeding net in the sea, all kinds of cotton nets and polyamide fibre nets.

平度南村塑料网具厂主要产品有各种颜色各种型号的聚乙烯线（6股-70股），各种型号的渔网、海上养殖网、各种棉线网、锦纶网。

64. Even grain color sideband, entire cotton and kapok color sideband,polypropylene fiber color sideband, polyester fiber color sideband,polyamide fiber (nylon) color sideband.

平纹色边带、全棉色边带、丙纶色边带、涤纶色边带、锦纶（尼龙）色边带。

65. The dowtherm design depends on the characteristics of dowtherm and polyamide production process.

必须根据导生的特性及聚酰胺生产的工艺特点 ,选择合理的设计方案。

66. A Mature Polyamide Resin Producer and Exporter.

成熟的聚酰胺树脂生产商和出口商。

67. The result shows: the resistivity, anti-corrosion and chemical resistance of the film from arylated alkyl amine curing agent were better than that of conventional polyamide curing agent.

指出浅色环氧防静电涂料选用芳脂胺类型的固化剂,所得漆膜的电阻率、防腐蚀性和耐化学品性均优于传统的聚酰胺固化剂。

68. The technics of adsorption and elution of nuciferine with polyamide resins as adsorbent was studied.

探讨了聚酰胺树脂对荷叶碱的吸附和洗脱工艺。

69. Alloy of polyamide 6 and modified bismaleimide was prepared by melt blending to improve its thermal properties.

摘要将尼龙6与改性双马来酰亚胺熔融共混形成合金以提高其热稳定性能。

70. The physical, electrical and heat-resistant properties of polyamide resin (BMP350)/M-glass (MW100) composites are studied in this paper.

摘要本文研究了玻璃纤维(MW100)/聚酰亚胺树脂(BMP350)复合材料的物理性能、介电性能、耐热性能。

71. The application of rare-earth compds, in tine-denier polyamide fiber dyed with reactive dyes was researched.

摘要研究了稀土在细旦锦纶活性染料染色中的应用及其对染色效果的影响。

72. In this paper, Tartrazine, Pocean 4R and Brilliant Blue were extracted by polyamide from puffed food, then fulled in the injector.

摘要采用聚酰胺粉法提取膨化食品中日落黄、胭脂红、亮蓝，湿法装注射器管小柱。

73. Methods Pristimerin was isolated and purified by polyamide column chromatography and silica gel column chromatography,and the content of pristimerin was determined by HPLC.

方法南蛇藤根粉经丙酮冷浸提取后,采用聚酰胺柱层析及硅胶柱层析进行分离纯化;

74. Methods Flavonol and flavanonol were separated by the column chromatography of polyamide,and identified by UV and IR spectrophotometry.

方法采用聚酰胺柱色谱作为分离手段,结合紫外、红外吸收光谱进行检测。

75. Methods Flavonol and flavanonol were separated by the column chromatography of polyamide, and identified by UV and IR spectrophotometry.

方法采用聚酰胺柱色谱作为分离手段，结合紫外、红外吸收光谱进行检测。

76. METHODS Technique of polyamide lamina chromatogram, technique of measuring nitrogen, and technique of measuring amino acid with analyzing equipment were used.

方法采用聚酰胺薄层色谱法、定氮法与氨基酸分析仪测定法,对穿山甲和搀假穿山甲中蛋白质和氨基酸进行测定。

77. Wuxi Mingte and Zhongyi Co., Ltd. locate in Industrial Zone, XiBei Town, XiShan District, Wuxi City, Jiangsu Province.We are specialized in polyamide series products.

无锡明特（中亿）化纤有限公司 位于江苏省无锡市锡山区锡北镇工业园区，是专业生产锦纶系列产品的企业。

78. It's a two-component, chromate-free, epoxy polyamide adduct shop primer especially designed.

是一种不含铬的双组份环氧聚酰胺加成物的车间底漆。

79. UEW-Y is a kind of double coatings enameled copper round wire, thermal class 130, with polyurethane resin as under coating and polyamide resin as over coating.

是以聚氨酯树脂为底层、聚酰胺树脂为表层涂制而成的、热级为130的双涂层漆包铜圆线。

80. UEW-E is a kind of double coatings enameled copper round wire, thermal class 155, with polyurethane resin as under coating and polyamide resin as over coating.

是以聚氨酯树脂为底层、聚酰胺树脂为表层涂制而成的、热级为155的双涂层漆包铜圆线。