polyimide

polyimide

1. Study on photoelectric properties of perylene polyimide

苝聚酰亚胺光电性能研究

2. Property of Polyimide Alignment Layer Used for STN Liquid Crystal Display

STN型液晶显示用聚酰亚胺表面取向材料的性能

3. Jia J H, Zhou H D, Gao S Q, et al.The tribological behavior of carbon fiber reinforced polyimide composites under water lubrication[J].Tribology, 2002, 22 (4): 273-276.

[3]贾均红,周惠娣,高生强,等.炭纤维增强聚酰亚胺复合材料在水润滑下的摩擦学性能[J].摩擦学学报, 2002, 22 (4): 273-276.

4. Keywords asymmetric membrane;polyimide;imidization;

不对称膜;聚酰亚胺;亚胺化;

5. Professional design, development, production, marketing polyimide film, KAPTON tape, KAPTON die-tape, PET Green Belt, blue plastic, glass cloth belt, at the same time, providing the overall solution.

专业设计、开发、生产、销售聚酰亚胺薄膜、KAPTON胶带、KAPTON模切胶带、PET绿胶带、蓝胶带、玻璃布胶带、同时为客户提供整体解决方案。

6. The MF voice coil is of copper-coated aluminium ribbon, expensively edge-wound over a polyimide former to increase sensitivity by maximising the amount of copper in the magnet gap.

中频音圈为镀铜铝带，在其聚酰亚胺成形品上有昂贵的饰边，尽可能加大铜在磁隙中的量来增加灵敏度。

7. In this study, a novel polyimide (PI) film, consisting of multiwall carbon nanotubes (MWCNTs) dispersed in an Ionic Liquid (IL), were demonstrated to be high shielding effectiveness (SE).

为了清楚地了解系统中分子间的作用力，多层壁奈米碳管的分散机制也被定性地研究。

8. To find a simpler processing, the integrated sensors based polyimide was designed and fabricated, and the processing was summarized.

为了进一步降低成本简化工艺，又设计了基于聚酰亚胺的温湿压传感器，并且进行了工艺实验和分析。

9. Keywords two-layer FCCL;polyimide;performance;

二层柔性覆铜板;聚酰亚胺;性能;

10. Advances in Polyimide Used in Two-layer Flexible Copper Clad Lamination

二层柔性覆铜板用聚酰亚胺研究进展

11. The composition, the molecular and the characteristics of polyimide (PI) fiber as a precursor of carbon fibers were introduced.

介绍了作为碳纤维前驱体的聚酰亚胺(PI)纤维的组成、分子结构和特性;

12. Loss Performance of CPW with Thick Polyimide on Low-resistivity Si

低阻硅基厚膜聚酰亚胺上共面波导的损耗特性

13. Keywords Photosensitive polyimide;Copolymerization;Hheat-resistent;

光敏聚酰亚胺;共聚;耐热性;

14. Developmental situations in photosensitive polyimid

光敏聚酰亚胺的发展现状

15. Molecular mechanics simulation is used to study the static behavior of a metal Ag monolayer on the two dilayer models of Perylene Polyimide.

利用分子力学模拟研究了单层金属银在双层聚苝酰亚胺的不同表面模型上的静态行为。

16. It is shown that the monolayer forms aggregates on surface of the "V" model of Perylene Polyimide.

单层银在聚苝酰亚胺“V”形开口向上的表面上形成了聚集体。

17. Keywords polyimide;monoamine;alignment;pretilt angle;

单胺;聚酰亚胺;取向;预倾角;

18. Part 2 : specifications.Specification number 17 : thin polyimide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed board.

印刷电路用基材.第2部分:规范.17号规范:多层印刷电路板制作用规定易燃性的聚酰亚胺机织玻璃纤维织物包铜层压板Base materials for printed circuits.

19. Another nylon resin products, polyimide, imports of used tire rubber.

另有尼龙树脂产品，聚酰亚胺，进口废轮胎橡胶。

20. Keywords silicon-containing aromatic dianhydride;polyimide;monomer;

合硅芳香二酐;聚酰亚胺;单体;

21. STUDY ON THE POLYIMIDE ALIGNMENT FILMS WITH SIDE CHAIN CONTAINING BIPHENYL UNIT

含联苯基团侧链聚酰亚胺液晶取向膜的研究

22. polyimide film with hydroxyphenyl structure

含酚羟基聚酰亚胺薄膜

23. Keywords piperazine;polyimide;modified;ternary copolymerization;

哌嗪;聚酰亚胺;改性;三元共聚;

24. Keywords durene;pyromellitic acid dianhydride;polyimide;

均四甲苯;均苯四甲酸二酐;聚酰亚胺;

25. Integrated Sensor of Temperature Humidity and Pressure Based on Polyimide

基于聚酰亚胺的温湿压集成传感器

26. Keywords composites;resin matrix;polyimide;copolyimide;PMR;

复合材料;树脂基体;聚酰亚胺;共聚聚酰亚胺;PMR;

27. A scattering polarizer is prepared by using polymer networks formed from an amorphous monomer, nematic liquid crystals and polyimide coated ITO glass substrates.

它是由非晶态单体形成的聚合物网络、向列液晶和涂有聚酰亚胺的 ITO玻璃基板组成。

28. In order to improve the mechanical properties of the para-aramid paper, various polyimide can by used as reinforcing resin.

对位芳纶纸基材料分子结构的刚性及纤维表面的惰性导致其机械力学性能较低。

29. A preliminar application of the polyimide film to two layer flexible copper clad lamination was studied.

对该聚酰亚胺在二层柔性覆铜板上的应用进行了初步研究。

30. Keywords capped polyimide;imidization;kinetics of imidiztion;

封端聚酰亚胺;亚胺化;亚胺化动力学;

31. The information was obtained on monomeric isomer distribution of PMR polyimide resin solution and purity of prepared materials.

并对树脂单体材料的纯度以及PMR型树脂溶液中的单体及单体异构体成分进行了分析。

32. The experiments were made in order to study the TSC curve of nano-hybrided polyimide and polyimide which is not hybrided, nano-hybrided polyimide by various heating treatment.

并应用电子束注入极化法测量了样品经过电子束注入极化后的TSC曲线。

33. Widely used in epoxy and polyimide, such as phenolic resin, can improve the mechanical properties of products.

广泛应用于环氧、聚酰亚胺、酚醛等树脂中，可有效提高制品的机械性能。

34. State of polyimide moulding powder treated at different temperatures was studied by using wide angle X _ ray diffraction and small angle X _ ray scattering technique.

应用广角X射线衍射技术和小角X射线散射技术,对不同热处理温度下的聚酰亚胺模塑粉的形态结构进行了研究。

35. A novel technology by using laser microband antenna on curved surface of teflon, polyimide and epoxide resins is introduced in this paper.

应用激光技术 ,在聚四氟乙烯、聚酰亚胺和环氧树脂曲面基体上制作出了符合实用要求的微带天线。

36. Making Microship Antenna on Cone-shaped Surface of the Polyimide with Laser

应用激光技术制作聚酰亚胺锥形微带天线

37. Keywords Polyimide;Isosorbide-based;Synthesis;Transparent;Soluble;

异山梨醇;聚酰亚胺;透明;可溶性;

38. Design of Temperature-Insensitivity for 120 nm Waveband Fluorinated Polyimide Waveguide Coupler[J].

引用该论文 卢红亮,陈抱雪,赵德欣,矶守,袁一方,贾洪波,梁东波,龙彩华.

39. Preparation of ultra-thin freestanding polyimide films with sequential evaporation technique[J].

引用该论文 戚同非,吴永刚,王勇,张莉,林小燕,田国勋,焦宏飞,陈玲燕.

40. Design of High-Isolation Polyimide Waveguide Wavelength De-multiplexer with Polarization-insensitivity[J].

引用该论文 方志刚,陈抱雪,周建忠,高仁喜,袁一方,陈林,矶守.

41. Optimized Design of Polarization-independent for Fluorinated Polyimide Interleaver[J].

引用该论文 贾洪波,陈抱雪,周建忠,赵德欣,袁一方,矶守.

42. Crosstalk Caused by Fabrication Errors about Polyimide Waveguide Interleaver and its Improvement[J].

引用该论文 高仁喜,陈抱雪,陈林,袁一方,矶守.

43. The attenuation coefficient of the dominant mode is less than 1 dB/m when the dielectric material is polyimide and the depth is 0.05 mm,which is far less than that of the same bore diameter metal circle waveguide for THz radiation.

得出其主模在THz频段的衰减常数小于1 dB/m,该值远小于相同内径的金属圆波导在这一频段的衰减常数。

44. Evaluation of polyimide film developing level in China

我国聚酰亚胺薄膜制造技术发展水平的评估

45. Scanning tunneling microscope (STM) is exploited to characterize morphologies and molecular structures of polyimide Langmuir-Blodgett(LB) monolayers.

扫描隧道显微镜(STM)被用来表征聚酰亚胺LB膜的形貌及分子排列结构。

46. Analysis of solvent contents in polyimide by FT IR and GC/MS was reported.

报道了用红外光谱法和GC/MS法对聚酰亚胺中所含溶剂成份的分析与鉴定。

47. A new type of uncooled infrared detector with polyimide thermal-isolation structure is presented.The detector has the advantage of simpler process, lower cost and higher yield.

提出了一种基于聚酰亚胺绝热层的新型非制冷红外探测器结构.该结构具有工艺简单、成本低廉、成品率高等优点.利用底部反射金属层可以提高红外吸收率;

48. A method for designing optimized polarization independent and temperature insensitive optical waveguide couples using fluorinated polyimide is presented.

提出了一种适合于宽带光波导耦合器的抗偏振变动、抗温度变动的优化设计理论和方法。

49. Photosensitive polyimide (PSPI) that possessed both heat-resistant and sensitive properties has attracted great interests in many fields.

摘要光敏聚酰亚胺(PSPI)是兼有耐热性能和感光性能的一类高分子材料。

50. A new type of uncooled infrared detector with polyimide thermal-isolation structure is presented.

摘要提出了一种基于聚酰亚胺绝热层的新型非制冷红外探测器结构。

51. Thermal expand coefficient of polyimide films at each temperature was measured in the process of thermal cycling.

摘要测量了聚酰亚胺薄膜在冷热循环过程中各温度点的热膨胀系数。

52. The adhesive performance of polyimide based binder, which had excellent heat resistance, to PTFE microporous membrane was studied.

摘要研究了具有优异耐热性的聚酰亚胺胶黏剂对聚四氟乙烯微孔薄膜的粘接性能。

53. The changes of structure and its effect on performance of polyimide film have been studied at different carbonization temperature.

摘要研究了聚酰亚胺薄膜在不同碳化温度下，材料内部结构转变规律及其对材料性能的影响。

54. The hydrophilicities, water vapor permeation of a series of modified polyimide (PI) membranes, and the apparent viscosities of their mixed solutions were investigated.

摘要考察了改性聚酰亚胺(PI)膜的亲水性、水蒸气渗透性、制膜混合溶液的表观粘度。

55. Study on sealed package substrate with modified polyimide resin

改性聚酰亚胺封装基板的研制

56. The reason is that the cohesive interaction between Ag atoms is stronger than the adhesive interaction between the Ag monolayer and the surface of Perylene Polyimide.

数据分析表明银原子之间的内聚能小于银与聚苝酰亚胺表面之间的着附能,在内聚能和着附能中范德华力均起重要作用。

57. In order to avoid the relative harsh conditions of the high-temperature imidization, chromophores were incorporated into the polyimide backbone via a post-azocoupling reaction during the first route.

文中对这两种路线得到的聚酰亚胺进行了特性粘度、红外光谱、核磁共振、差示扫描量热测试。

58. Finally, the polyimide layer at the tips was removed by electro discharging.

最后，尖端的绝缘层用放电法去除。

59. The potentiometric titration technique was used to determine the content of residual amic acid in polyimide, which was synthesized by the two-step method.

未完全环化的酰胺酸对聚酰亚胺的性能有重要影响,用电位滴定法可直接测定其含量。

60. The constituent and properties of the meltable polyimide adhensive and others are introduced.

本文介绍了可熔性聚酰亚胺胶粘剂与其他二种胶粘剂的结构及使用特点。

61. Adipic acid being used as a modifier, the modified polyimide membrane for pervaporation separation of MeOH/MTBE system was prepared.

本文以己二酸对聚酰胺羧酸进行改性,制得改性聚酰亚胺膜,用于甲醇/甲基叔丁基醚的渗透汽化分离。

62. In this paper,four types of the photoalignment polyimide films are summarized.At the same time,the mechanism and application are also discussed.

本文对四种聚酰亚胺光控取向膜进行了详细的概述,并简述了这种光控取向膜的机理及未来应用。

63. The investigation on polyimide and its blends is reviewed. The effect of chemical structure of polyimide on the miscibility, crystallization and mechanical properties of the blends is discussed.

本文综述了聚酰亚胺及其共混物的研究进展，讨论了聚酰亚胺的分子结构对其共混物的相容性，结晶行为及力学性能的影响。

64. The market situation of polyimides and progress of polyimide film,moldings and composites were introducd in this review paper.

本篇综述主要介绍聚酰亚胺的市场动态及其薄膜、模塑料和复合材料的进展。

65. Yanagishita, H.;Nakane, T.;Nozoye, H.;Yoshitome, H., “Preparation of Polyimide Composite Membrane by Chemical Vapor Deposition and Polymerization Technique (CVDP) ”, J.Appl.Polym.Sci., 49, 565(1993).

林美月，”以电泳沉积方式形成聚醯亚胺电子绝缘膜之研究”，国立成功大学化学工程研究所硕士论文，41(2000)。

66. flexible polyimide substrate

柔性衬底

67. Keywords thermosetting resin;polyimide;PMR;

热固性树脂;聚酰亚胺;PMR;

68. thermosetting polyimide (PI)

热固性聚酰亚胺

69. Keywords thermoplastic;polyimide;morphology;modified;L/D ratio;

热塑性聚酰亚胺;结构形态;改性;长径比;

70. Thermoplastic polyimide foam

热塑性聚酰亚胺泡沫

71. Investigation on Coefficient of Thermal Expansion for Thermoplastic Polyimide

热塑性聚酰亚胺的热膨胀系数研究

72. Then, the array was got soaked in liquid polyimide so as to make a sub-micron insulating layer, and it was evaporated.

然后阵列用液态的聚酰亚胺包裹，形成一个亚微米的绝缘层，然后风干。

73. The fabrication steps of the buried polyimide waveguide include deep etching, polishing of polyimide, global planarization and formation of waveguide end facets.

然而，在整个波导的主要制作包括蚀刻玻璃，研磨高分子材料及蚀刻波导的侧边结构。

74. Tribological Performances of Glass Bead Modified Thermoplastic Polyimide

玻璃微珠改性热塑性聚酰亚胺摩擦磨损性能

75. Polyimide Film for Flexible Copper Clad Laminate

用于挠性覆铜板的聚酰亚胺膜

76. Use a magnifying loop to inspect the cut. Make sure the cut is square across the tubing with no polyimide or glass fragments at the end of the tube.

用放大镜检查划口。确认划口正交于柱,柱端没有聚酰亚胺或石英碎片。

77. GI: The woven glass fiber laminate impregnated with polyimide resin.

用浸渍聚酰亚胺树脂的玻纤布制成的积层板。

78. The irradiated polyimide films with linearly polarized UV light can induce the liquid crystal molecules oriention.

用线性偏振紫外光照射聚酰亚胺膜可以诱导液晶取向。

79. Based on 26B4APBN monomer,polyamic acid was obtained by polymerization with pyromellitic dianhydride(PMDA),and further imidized into polyimide(PI) film by heating process.

由二胺单体和均苯四甲酸二酐(PMDA)进行聚合得到26B4APBN/PMDA聚酰胺酸,再经热亚胺化得到聚酰亚胺薄膜;

80. X-ray photoelectron spectroscopy analysis reveals that O2 plasma will react with carbon atoms in the polyimide structure to form C-O bonding on the surface and destroy the polyimide structure.

由实验结果可以发现，O2电浆将会与含氟聚亚醯胺中的C原子反应形成C-O键结，并进一步破坏含氟聚亚醯胺表面结构。