polymerized
1. Type 26 fluorine rubber is polymerized by VDF and HFP.
26型氟橡胶是由偏氟乙烯(VDF)和六氟丙烯(HFP)聚合而成。
2. JSR plugging agent is a mixture of water-in-oil emulsion,bentonite and polymer.
JSR堵剂是油包水乳状液与膨润土、聚合物混合后获得的增稠软塞堵剂。
3. JS polymer cement-based waterproof Paint and Water leakage etc.
JS聚合物水泥基防水涂料及水不漏等。
4. RC 1451 is a acrylic resin polymer, polyurethane and auxiliaries compound.
RC 1451是一支聚氨酯的综合树脂。
5. Please call TOSCANA LASTS LTD, if you need further views for Polymer or Shoe.
TOSCANA LASTS LTD公司为您提供准确的、可靠的聚合物、聚合体,鞋、闸瓦承座。
6. A high polymer is a very large aggregation of units.
一个高聚物是许多单元的非常大的组合。
7. Emulsion polymerized styrene butadiene rubber.
丁二烯、苯乙烯在乳液体系中进行共聚制得的橡胶。
8. BUNa-N is a general purpose oil resistant polymer known as nitrile rubber.
丁腈橡胶(BUNa-N)是一种多用途抗油品腐蚀聚合物,称为腈橡胶。
9. Ferric Chloride alone gives polymer with benzene.
三氧化铁可单独催化苯的聚合。
10. Shanghai Keter Polymer Material CO., Ltd.
上海科特高分子材料有限公司。
11. Acrylic laminate films are made from polymerized acrylic monomers. They may be clear or pigmented, and are bonded to metal substrates by an adhesive.
丙烯酸膜从丙烯酸单体聚合而成。它们可以是透明的或有色的,这些膜通过粘联剂粘到钢材上。
12. Both are polymer replicas of master gratings.
两个都是标准光栅的聚合物复制品。
13. With Polymer Layer that fully absorbs wetness and prevents leakage and seepage.
中层为高分子吸收体,能充分吸收凝聚水份,确实防渗、防漏。
14. For the flame retardant chemical to be effective, it must be available at the point at which the polymer decomposes.
为了使化学阻燃剂有效,务必在聚合物分解之时,阻燃剂能发挥作用。
15. This then taints their view of all polymer sealants unfairly.
于是他们觉得聚脂密封剂不好。
16. A new coagulant agent polymerized by both inorganic and organic high moleculars was developed for water purification.
介绍了新研制开发的无机高分子与有机高分子结合而成的新型、高效、经济的混凝剂净水灵。
17. Ion beam induced surface modification of polymer was extensively discussed.
介绍了运用高能离子束对聚合物材料进行表面改性的新工艺。
18. A new process for manufacturing thermally polymerized aromatic petroleum resins using crack C9 fraction which are rich of DCPD has been developed.
以富含双环戊二烯的裂解C9馏分为原料,开发无污染的热聚合法芳烃石油树脂生产新工艺。
19. A colorless liquid polymer, C6H12O3, of acetaldehyde, used as a solvent and a sedative.
仲(乙)醛,三聚乙醛一种用作溶剂和镇定剂的无色液体聚合物,C6H12O3
20. A polymer that consists of two, three, or four monomers.
低聚体由二个、三个或四个单体构成的聚体
21. A polymer of two or more different monomers.
共聚物一种由两种或多种不同单体构成的聚合物
22. Chitin is a polymer of N-acetylglucosamine.
几丁质是N-乙酰葡糖胺。
23. The development of antistatic polymer composites was reviewed.
分析了防静电高分子材料的研究现状;
24. After pre-treated by low-temperature plasma,N-vinyl-2-pyrrolidone(NVP)is graft polymerized onto chitosan film.
利用低温等离子体对壳聚糖膜进行预处理后,引发N-乙烯基吡咯烷酮(NVP)在膜上接枝聚合。
25. The polymer film's hydrophile was test with contact angle machine.
利用接触角测试仪分析该聚合膜的亲水性。
26. The complex 1 features a 2D tetrazole coordination polymer.
化合物1为二维四唑配位聚合物。
27. Chemical reactions take place in the mold rapidly and the polymer solidifies.
化学反应在铸型(模具型腔)中迅速发生且聚合体凝固。
28. The microstructure and morphology of single polymer chain.
单个高分子链的结构和形态。
29. A molecule that can combine with others to form a polymer.
单体可以与其他分子结合形成聚合物的分子
30. Nanjing Ruiya Polymer Processing Equipment CO., LTD.
南京瑞亚高聚物装备有限公司。
31. The product is a kind of amphiprotic polymer with multifunction.
同时考察了它在钻井液中的抗温、抗盐和配伍性。
32. Formaldehyde, polymer with 4-nonylphenol, ether with .alpha.-hydro-.omega.
名称 甲醛与丙氧化4-壬基苯酚的聚合物;
33. Any of various compounds containing the vinyl radical, typically highly reactive, easily polymerized, and used as basic materials for plastics.
含乙烯基的化合物含有乙烯基因子的化合物之一,典型地具有高度活性,易被多结构化,是用作塑料制作的基本材料
34. CFCs are chlorine, fluorine and carbon polymer.
含氯氟烃是氯、氟及碳的聚合物。
35. Faraone G., Parascco G. and Cogrossi C., J. Appl. Polymer Sci., 5, 16 (1961) .
周杏茂、余仲元、刘克静,中国科学院高分子学术会议会刊(1961),科学出版社,390页,1963。
36. Solid polymer electrolyte capacitor humidity sensor.
固体聚合物电解质电容式湿度传感器。
37. Present status on the research and application of geo - polymer.
土聚水泥的应用及研究现状。
38. In this paper, the electrical and mechanical properties of PCA-PEG polymerized blend and PCA-PEET blend are studied.
在对PCA-PEG聚合共混物和PCA-PEET共混物电性能和力学性能研究的基础上,纺制了PCA-PEG共混纤维和PCA-PEET共混纤维;
39. Ethylene oxide was polymerized under microwave irradiation using some anionic as a initiator.The reaction time was shortened.
在微波辐射下,选择不同的阴离子引发剂使环氧乙烷开环聚合,缩短了反应时间。
40. In this thesis, the short chain MEH-PPV polymer is studied.
在本论文中所讨论的研究材料是短链的MEH-PPV分子。
41. Use the XCD polymer as the viscosifier and fluid loss additives in mud.
在泥浆中用XCD生物聚合物作为提粘剂和降失水剂。
42. Most polymer emulsion may coagulate when they enter waste streams.
多数聚合物乳浊液在进入废水流时可能凝聚。
43. Most skeletons were built up with the aggregations of polymer molecules.
大部分网络骨架不是由单个聚合物分子形成,而是由聚合物分子聚集体形成。
44. The current efforts made in this field are just targeting the industrialization of the polym...
实现工业化是聚合物基纳米复合材料的发展方向。
45. High conductivity polymer ion conductor in R.T.
室温高导电率高分子离子导体。
46. That means PMMA has changed from polar polymer to non-polar polymer.
对此现象的解释机理提出了“孔洞”与“极性基团断裂”两种假设。
47. Compared with acrylic emulsion polymerized with soap, emulsion polymerized without soap showed better compactibility with inorganic powders.
对比有皂聚合的丙烯酸乳液,无皂聚合的乳液与无机粉料体现出更好的相容性。
48. The mechanism of drug release from swellable polymer was studied .
对药物从亲水聚合物凝胶系统中释放的机理进行了研究。
49. The funding programs on polymer science have been brie fly introduced.
对近期国家自然科学基金化学科学部高分子科学学科的基金资助情况进行简要介绍。
50. Any necessary adjustments can then be made with Drispac R/SL and XCD polymer.
对钻井液作任何必要的调整都可以用高粘或低粘锥斯派克和生物聚合物。
51. Nano titanium polymer paint was chosen as the anticor rosive paint.
对防腐涂料进行了筛选,确定采用钛钠米聚合物涂料作防腐涂层。
52. Shandong Weigao Group Medical Polymer Co., Ltd.
山东威高集团医用高分子制品股份有限公司。
53. Changzhou Dupeng Polymer Material Co., Ltd.
常州都朋高分子材料有限公司。
54. In addintion,its polymer effect of lowing pour-point of diesel oil is studied.
并考察其聚合物对柴油的降凝作用。
55. Application of photorefractive polymer in electrooptics[J].
引用该论文 刘建静,郝伟,刘锴,唐保军.
56. Thermosensitive Liquid Crystal Polymer Color Image Display[J].
引用该论文 史永基,史建军,史红军.
57. Scattering Properties of Polymer Stabilized Cholesteric Liquid Crystal[J].
引用该论文 谢永杰,赵学庆,刘晶儒,王立君.
58. Electrooptic effect in dyeooped polymer light waveguide film[J].
引用该论文 马于光,刘式墉,朱江,沈家骢.
59. C.K. Ober, M.L. Hair, J. Polym. Sci., Part A: Polym Chem. Ed. 25 (1987) 1395.
张洪涛、江兵兵、黄锦霞,高分子材料科学与工程18(2002)57.
60. When the gel has polymerized, a distinct interface will appear between the separating gel and the water.
当凝胶聚合后,在分离胶和水层之间将会出现一个清晰的界面。
61. When the mole ratio of D4 and VD4 in siloxane monomers is above 10:1, the emulsion copolymer is steadily polymerized.
当硅氧烷单体中D4和VD4物质的量之比大于10:1时,该共聚物乳液聚合稳定性好。
62. When excess silica exists, it reacts with the produced C-S-H, forming a new, highly polymerized C-S-H, having a very low C/S ratio(<1.0).
当硅灰过量时,则多余的硅灰能和已经生成的C-S-H继续反应,生成一种聚合度很高,但C/S很低(<1.0)的新型C-S-H。
63. The status of polymer solid alloy was analyzed.
报道了高分子固体合金的研究现状。
64. The development trend of the antistatic polymer materials...
指出抗静电高分子材料的发展趋势。
65. An effective method to study polymer melts in complex flow isdescribed.
提出了一种用于研究聚合物熔体复杂流动的有效方法。
66. The foam multisystem consists of polymer, alkaline, surfactant and natural gas.
摘要多元泡沫复合体系由聚合物、碱、表活剂、天然气组成。
67. Poly(ethylene glycol) (PEG) is a hydrophilic polymer which has flexible long chain.
摘要聚乙二醇是一类亲水性长链聚合物。
68. Inpouring polymer flooding is one important process to enhance oil recovery.
摘要聚合物驱油是提高原油采收率的重要方法之一。
69. Polymer Coating Technologies of Singapore Pte Ltd.
新加坡涂装技术有限公司。
70. Wuxi Yutian High Polymer Material Co., Ltd.
无锡市裕田高分子材料有限公司。
71. There was a synergism among alkali,surfactant and polymer.
显微照片验证了含驱油剂的乳液存在多重乳状液。
72. Coverage of polymer particles is obviously influenced by emulsifier structure.
显然聚合物胶粒总数受乳化剂结构的影响。
73. University Qualification preferably in Polymer Material field.
有与高分子材料相关专业的本科以上学历。
74. This article overviews such interesting and versatile polymer systems.
本文综述了这类聚合物系统的研究进展。
75. This paper discusses the influnce of different compounds in tar washing oil on the efficiency of adsorbing crude benzol and polymerized degree.
本文详细讨论了洗油中各组成对吸苯能力和聚合程度的影响。
76. This series products are compounds polymerized from ethylene oxide as initiating agent and EO.
本系列产品是以乙二醇为起始剂与环氧乙烷聚合制得的化合物。
77. Discher D.E., Eisenberg A., Polymer vesicles, Science, 297: 967.
朱玥珺,谭业邦,张翼,侯昭升.聚合物构筑的囊泡及应用.日用化学工业,35(2):94.
78. Material: Is made by the medical noon-toxic high polymer material.
材料:由医用无毒高分子材料制成.
79. Dendrimer is a new kind of polymerized molecule,which is highly symmetrical,monodisperse and outstanding mechanical property.
树状聚合物具有单分散、对称性高、机械性能好的特性,是一种用途广泛的新型材料。
80. Cleavage of secondary bonds can also be responsible for polymer deterioration.
次价键的分裂往往也能引起聚合体劣化。