polytetrafluorethylene

polytetrafluorethylene

1. By using a polytetrafluorethylene(PTFE) emulsion as fluorinating reagent, a method for fluorinating assisted eletrothermal vaporization (ETV)/ICP-AES direct determination of trace yttrium in TiO2 ceramic powder has been proposed;

以聚四氟乙烯（PTFE）悬浮体为氟化剂，悬浮体制样/氟化辅助电热蒸发（ETV）/ICP－AES直接测定TiO2陶瓷粉末中痕量杂质钇；

2. The results show that, while utilizing the polytetrafluorethylene (PTFE) and metal mesh wire electrodes, it seems easy to generate homogeneous and stable APGD by applying the form of DBD.

实验结果表明，采用PTFE和筛网电极可以更容易地利用DBD放电形式产生辉光放电，这与PTFE的驻极体特性和筛网电极在放电前的电晕充电效应有关。

3. Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.

将聚四氟乙烯树脂在常温下用模压法成型后再经高温烧结制成。

4. Surface Modification and Ablation of Polytetrafluorethylene by Excimer Laser Irradiation[J].

引用该论文 刘爱华,张运海,满宝元.

5. By using a polytetrafluorethylene (PTFE) emulsion as fluorinating reagent , a method for fluorinating assisted electrothermal vaporization (ETV)/ICP AES direct determination of trace yttrium in Al 2O 3 ceramic powder has been proposed.

报道了以聚四氟乙烯 ( PTFE)悬浮体为氟化剂 ,悬浮体制样 /氟化辅助电热蒸发 ( ETV) /ICP- AES直接测定两种 Al2 O3粉末样品中痕量杂质钇。

6. Using this method, polytetrafluorethylene (PTFE) and a copolymer of tetrafluo- roethylene and hexafluoropropylene (FEP) were treated.

用这种方法处理了聚四氟乙烯(PTFE)和四氯乙烯-六氟丙烯共聚物(FEP)。

7. Surface Modification and Ablation of Polytetrafluorethylene by Excimer Laser Irradiation

聚四氟乙烯材料表面激光改性与刻蚀

8. Keywords polytetrafluorethylene（PTFE）;modification;composite;heat exchanger;

聚四氟乙稀;改性;复合材料;换热器;

9. A trial study of expanded polytetrafluorethylene used for tissue engineering

膨体聚四氟乙烯用于组织工程支架材料的实验研究

10. Sample was digested in polytetrafluorethylene sealed vesssle by nitric acid-perhydrol or high chloric acid-perhydrol, Hg As Pb were simultaneously determinated by ICP-AES.

采用高压溶样弹，将样品用硝酸-过氧化氢或高氯酸-过氧化氢溶解后，用ICP-AES法对汞砷铅连续测定。

11. Keywords protective clothing;polytetrafluorethylene;layered membrane;thermoplastic polyurethane;

防护服;聚四氟乙烯;复合膜;热塑性聚氨酯;

12. Method for analysis of hygienic standard of polytetrafluorethylene coating for inner wall of food container

食品容器内壁聚四氟乙烯涂料卫生标准的分析方法