prefabrication

prefabrication

1. prefabrication of Span 0

0号预制

2. T girder prefabrication

T梁预制

3. World Association for Element-Building and Prefabrication

世界构件和预制件协会

4. Construction of Shenjiawan prefabrication base for donghai bridge

东海大桥沈家湾预制基地建设

5. Individual prefabrication

个体化预制

6. Therefore, a series 0f measures controlling prefabrication quality and welding angular deformation of the tank wall are put forward and the tank construction quality satisfies the code requirement.

为此，提出了壁板预制质量控制和壁板焊接角立缝变形控制的系列措施，使施工质量达到规范要求。

7. Authors mainly introduce quality control of allotype caisson in prefabrication,float transport and installation process.

主要介绍异型沉箱在预制、浮运、安装中的质量控制。

8. This paper introduces the prefabrication of ultra-long pile on water and piling construction for Phase II Project of Changshu Xinghua Port, which is jointly managed by China and Singapore.

介绍中新合资常熟兴华港二期工程水上超长桩预制与沉桩施工工艺。

9. Method and technique of segmental prefabrication, transfer gantry hoisting, splicing on arch timbering in construction of Xinyang Shihe River Bridge are introduced.

介绍信阳狮河大桥采用节段预制,龙门桁车提运,拱架上拼装等施工方法和施工工艺。

10. From preliminary design, prefabrication through to final set-up, all the work is strictly controlled by a carefully pre-set operational system.

从前期设计中期预制直到后期安装，全部工作都按照事前精心设计的操作体系进行严格控制。

11. We review and preview the status quo and tendency of tissue engineering bone prefabrication from bone prefabrication,vascularization and the reconstruction action of bone defect.

从组织工程骨的预制、血管化及预制骨骨缺损修复作用三个方面对组织工程化骨预制技术研究的现状和发展趋势进行了回顾和展望。

12. Plan Layout of Prefabrication Yard for Pre-tensioned PC Simple Support Girder

先张法预应力混凝土简支梁板制梁场的场地平面布置

13. Prefabrication of Prestressed Concrete Hollow Slab Beams with Pretensioning Method

先张法预应力空心板梁的预制

14. Three prefabrication sheds is planned to construct in the whole section, respectively on the right, left and K284+700 meter left.

全段拟设立三个预制场，分别设在右侧,K284+700左侧,左侧。

15. The prefabrication of riser in nozzle section, the prefabrication of nozzle easing, the welding of easing &riser and the installation of nozzle were introduced in detail with this paper.

其喷嘴为改造的重要部分,采取喷嘴套筒与提升管整体预制的方法,达到了预期的效果。

16. prefabrication method

分段装配法, 预制件法

17. Prefabrication of dental crowns for primary dentition and permanent young molars.

制造主要齿列和臼齿牙冠。

18. prefabrication of semi-circular concrete units

半圆体预制

19. Keywords meniscus;prefabrication;regeneration;cell culture;

半月板;构建;再生;细胞培养;

20. The Geberit welding machine is especially suitable for prefabrication.

吉博力焊接机尤其适用于管道预制。

21. The prefabrication technology of post-tensioned prestressed concrete hollow plate

后张法预应力空心板预制工艺及要点

22. Welding seam performed in prefabrication shop denote with “S “.

在预制厂焊接的焊缝，用“S”表示。

23. On the prefabrication of large oil storage tank thick shell plate

大型储油罐宽厚壁板的预制工艺

24. The Construction Method of the plant- prefabrication of the tube connection shell plate in the first ring of large oil storage tank

大型储罐第一圈带接管壁板工厂预制施工工法

25. Prefabrication Management of Pre-Engineered Metal Building Components for Construction Project of Large-Scale Steel-Structured Group Buildings

大型钢结构建筑群建设项目中的轻钢结构制造管理

26. Brief Introduction of Prefabrication and Hoisting for Concrete Crown Frame in Powerhouse within the Dam at Dahekou Hydropower Station

大河口坝内式厂房厂顶混凝土拱架预制、吊装施工简介

27. Construction Techniques of Long-span Concrete-filled Steel Tubular Box-shaped Vault Rib Subsection Prefabrication

大跨度钢筋砼箱形拱肋分段预制施工技术

28. Technology for Prefabrication of Semi-circular Concrete Units of North Grand Breakwater in Tianjin Port

天津港北大防波堤工程半圆体构件预制施工

29. The main characteristics that makes the panel construction technology very effective in terms of costs are the following: modularity, low weight, high degree of prefabrication, insulation properties.

夹心板建筑技术与成本方面有关的主要特点如下：模块化，低重量，预制性强，绝热效果好。

30. The disruption of road and rail traffic, so often experienced when a flyover , an underpass or a service is being constructed, can be minimized in those constructions incorporating prefabrication.

如果在建造立交桥、地下通道或服务设施采用预制结构,就会把经常发生的公路或铁路交通的中断情况降低到最小程度。

31. The disruption of road and rail traffic, so often experienced when a flyover, an underpass or a service is being constructed, can be minimized in those constructions incorporating prefabrication.

如果在建造立交桥、地下通道或服务设施采用预制结构，就会把经常发生的公路或铁路交通的中断情况降低到最小程度。

32. This article compares dry spreading technique with coating method of CCCW applied in prefabrication pipe sections, which are used in shield construction.

对比介绍了水泥基渗透结晶型防水材料(CCCW)在地铁盾构法施工预制管片生产中的干撒法和涂刷法两种施工工艺。

33. Views on the Airbag Float during the Prefabrication of Hollow Slab Beam

对空心板梁预制中气囊上浮的几点看法

34. In this paper, the authors summarize the fabrication and installation technology of prefabrication combination standpipe to form a series of construction technologies.

对预制组合立管的制作与安装进行技术总结，形成了一套固定的施工工艺。

35. Keywords Work Study;Process procedures;Petrochemical installation;Prefabrication and installation;Electrical copper buses;

工作研究;工艺程序;石化装置;预制安装;电气铜母排;

36. In some cases the prefabrication can also include installing the vapor barrier, siding and even windows.

拍拖一个月就闪婚的小张坦言：“能否结婚，其实第一面就能判断了。”

37. Then the prestress of the piles was adjusted to the designed value in prefabrication,and good effect was achieved.

提出适当调整预应力,能够有效地解决预应力水冲桩桩身裂缝的问题。

38. Then the prestress of the piles was adjusted to the designed value in prefabrication, and good effect was achieved.

提出适当调整预应力，能够有效地解决预应力水冲桩桩身裂缝的问题。

39. The construction technology of prefabrication and suspended splicing of continuous concrete box girders are described.

摘要结合工程实例，对节段短线匹配法预制、架桥机悬拼施工工艺进行介绍。

40. integral prefabrication

整体预制

41. The choice and arrangement of bridge prefabrication site at construction site

施工现场桥梁预制场的选择与布置

42. Prefabrication and Installation of T-shaped Beams for a Curved Bridge

曲线桥T梁的预制与安装

43. This paper presents the prefabrication techniques and quality control measures for accoropode in north low tem- perature area.

本文主要介绍了在北方地区低温条件下扭王字块预制工艺及质量控制措施。

44. In this article,authors introduce application of CFG piles in treatment of soft soil foundation with experiences of the B2 bid foundation treatment of prefabrication field of Sutong Bridge.

本文结合苏通大桥B2标预制场地基处理的工程实际,浅谈CFG桩在软基处理中的运用。

45. Main points of quality control of field prefabrication fair-faced concrete stand plate are introduced on the basis of actual engineering properties of stadium.

根据体育场看台板的实际工程性质,介绍了现场预制清水混凝土看台板的质量控制要点。

46. Combined with practical work,from setting isolation layer,installation of formwork,duck leakage and other aspects the problems existed in prefabrication of prestressed beam slab are pointed out.

根据施工实践,从隔离层的铺设、模板的安装、孔道漏浆、梁板封锚混凝土等方面提出了预应力梁板预制中存在的问题,分析了其产生原因,介绍了预防措施,以提高其预制质量。

47. According to underground environmental demands of the coal mine,have developed polyurethane foam plastics prefabrication insulating pipe with polyethylene outer sheath.

根据煤矿井下环境要求,研制开发出聚乙烯外护套聚氨酯泡沫塑料预制保温管。

48. prefabrication of beam

梁体预制

49. Construction of beam prefabrication yard

梁场建设

50. prefabrication of the space

梁场预制

51. prefabrication of beam slab

梁板预制

52. Two Different Warming-up Curing Techniques for prefabrication of Caissons in Winter Seasons

沉箱冬季预制施工中两种不同的加温养护工艺

53. Prefabrication technology and quality control of pretensioning prestressed hollow plate

浅谈先张法预应力空心板预制工艺及质量控制

54. Prefabrication and AssembIy of the Air-Plane Flat for the Sea Drilling Platiorm

海上采油平台飞机平台的预制与组装

55. prefabrication of concrete element

混凝土构件预制工艺

56. Keywords sol;gel;carbon fibers;alumina oxide;C/Al prefabrication;

溶胶;凝胶;碳纤维;三氧化二铝;碳／铝预制丝;

57. Prefabrication of Caisson by Slip-framed Reverse Mould Technique

滑框倒模技术预制沉箱

58. Keywords tar tank;field prefabrication;welding;flip chip;

焦油槽;现场预制;焊接;倒顶装;

59. site prefabrication

现场预制

60. flap prefabrication

瓣预构

61. short-line prefabrication

短线法预制

62. Construction Technology for Prefabrication of Double Line Box Girders with Large Tonnage in Shijiazhuang-Taiyuan Passenger Dedicated Railway Line

石太铁路客运专线大吨位双线箱梁预制施工技术

63. Factory prefabrication of petrol-chemical pipes

石油化工管道的工厂化预制

64. Spatial core Liang prefabricates uses the integral-type assembling template, in the prefabricated field concentrates the prefabrication, the flatbed transports by cart, crane installment.

空心板梁预制采用整体式拼装模板，预制场内集中预制，平板车拉运，吊车安装。

65. Common problems in hollow board prefabrication and its solvation

空心板预制中常见问题的分析与解决

66. Consumable Electrode Automatic Welding Production Line for Pipeline Prefabrication

管线预制熔化极全自动焊生产线

67. tube element prefabrication

管节预制

68. box beam prefabrication

箱梁预制

69. We can also provide systematic technologies, standards and all level of prefabrication services in environment design.

系统地引进工业技术、标准化和在环境设计的各个层次进行预制化。

70. Bone prefabrication is the focus of recent research in the field of bone tissue engineering.

组织工程化骨预制技术是目前骨组织工程领域的研究热点。

71. Experimental study of prefabrication and repair effect of bone defect on tissue-engineered bone

组织工程骨预制及其骨缺损修复作用的研究

72. The clinical study of structure of prefabrication stress stent and hemodynamics in percutaneous transhepatic portacaval shunt

经皮经肝门腔静脉分流术血流动力学与支架构型关系的临床研究

73. Keywords polyurethane foam;insulation layer;polyethylene coated pipe;buried pipeline;prefabrication;

聚氨酯泡沫保温层;聚乙烯夹克管;埋地;管道;预制;

74. Preliminary study of prefabrication of autologous tissue-engineered tendon

自体组织工程化肌腱预制的初步研究

75. On the application of the auto-welding technology used in the pipe prefabrication plant

自动焊在管道工厂化预制中的应用研究

76. On the pipe end seal welding technology in pipe prefabrication plant

试论管道工厂预制的封底焊接技术

77. Detail design and process management soft applied in pipe prefabrication

详图设计和过程管理软件在管道预制中的应用

78. This is the first time to carry out the experiment of constructing the dam with monolithic block prefabrication in the Chinese history of water conservancy.

这是中国水利史上第一次采用大块体预制安装筑坝施工方法的试验。

79. In order to shorten construction durations, people often apply the steam curing technology to the prefabrication of concrete box beams in many projects.

采用蒸汽养护技术预制混凝土箱梁可以提高梁的品质,缩短施工周期,该技术的难点在于严格、准确、实时地控制温度变化。

80. To overcome such a situation, adequate technical measures were taken and the prefabrication of the caissons was completed with good quality and sufficient quantity.

针对这种情况采取了相应的技术措施，保质保量地完成了该工程沉箱的预制任务。