shearing

shearing

1. While David was in the desert, he heard that Nabal was shearing sheep.

4大卫在旷野听见说拿八剪羊毛。

2. Unsymmetric bending, shear center, and thin-walled beams. 7.

6.非对称弯曲、剪力中心、及薄壁梁。

3. A jam occurred in a 603 scroll shear which covered the hopper sensor.

603号曲线剪发生了卡罐现象，盖住了送料斗的感应器。

4. Behavior. Thin Shear Layer Equations. TSL Coordinates.

8薄剪力层座标，边界条件，剪力层种类。

5. A Test and Study for Shear Pin of the Sample of APR-M_2 Circulating Valve.

APR-M_2循环阀取样器剪切销钉试验研究

6. ECAP is an effective method realizing pure shear deformation.

ECAP是实现材料纯剪切变形的有效方法。

7. FSM series shear pump: For solid-liquid or colloid-liquid, can be mixing, shearing, emulsible and homogenizing.

FSM 系列高速分散乳化机：该设备用于对固-液，液-液的混合液进行搅拌、混合、分散、溶解、乳化、均质。

8. Normally the shear velocity is about half of the compressional velocity.

一般地说横波速度大约是纵波速度的一半。

9. Adjustable shearing angle reduces the distortion of plate material.

上刀架采用内顷结构，便于落料，提高了制件的精度。

10. SHANGHAI JUWEI SHEAR AND BENDING MACHINE WORKS CO., LTD.

上海巨威剪折机床厂有限公司。

11. It is stress-strain demonstrates the properties of non-linear and harden, volume change is always shearing shrinkage.

不同配比的淤泥废弃泡沫塑料轻质混合土的常规三轴试验(CU、CD)表明，其应力-应变关系具有明显的非线性特征和应变硬化特征。

12. Without loss of generality, shear deformations will be neglected.

不失一般性，忽略不计剪切变形。

13. A similar but somewhat more involved derivation can be used to establish the shearing strains.

与此类似但稍微复杂的推导可以得出剪应变。

14. No place on earth was quite the hell a shearing shed was.

世界上最象地狱的地方就是剪羊毛棚。

15. Critical resolved shear stress (O’crss).

临界分剪切应力。

16. The main shear stress and its hydraulic system, calculation and research.

主要对其剪切力和液压系统进行计算和研究。

17. The interfacial shear stress is a constant proportion of the bottom shear.

交界面的剪力与底部剪力之比是常数。

18. The structure of the shearing die,running on common use press,with radial clamping for round bar was introduced.

介绍了一种用在通用冲床上的径向夹紧圆钢剪切模的结构、工作原理和设计制造要点。

19. The paper shows the application of Lenze EVS9300-EP AC servoposition controller to specified length shearing.

介绍了伦茨EVS9300-EP交流伺服位置系统在带材定尺剪切控制中的应用。

20. The basal principle and characteristic of continuous confined strip shearing acting on planking is introduced.

介绍了板材连续剪切变形方法的基本原理及特点。

21. They will be shearing the sheep next week .

他们将在下星期剪羊毛。

22. They are shearing the wool away.

他们正在把羊毛剪下来。

23. He went to help on the farm for a few days sheep shearing.

他到农场去了几天帮忙剪羊毛。

24. He found a job of shearing wool from sheep.

他找到一份剪羊毛的工作。

25. With a few quick snip of the shear he prune the bush.

他用大剪刀几下子就把灌木给修剪好了。

26. Sheep shearing is often a backbreaking job, where thousands of kilograms of sheep meat are shifted every day.

他说：“老实说，首先是因为这个工作是艰苦的体力活。剪毛工的在职生涯年月有限。

27. In this paper,the shearing characteristics and parameters of the bottom stalk of ramie Boehmeria nivea(L.

以华苎4号苎麻为试验材料,测定了收获期其茎秆底部切割区的剪切机械物理特性与参数。

28. High Conductivity Peformance. Good Flame Retardant and Shearing Resistance.

优良的导电性能,阻燃,抗剪切。

29. Plastic deformation as the result of dislocation motion; also, the shear displacement of two adjacent planes of atoms.

位错移动导致的塑性变形或两个相邻原子面的剪切位移。

30. Many go out for wool, and come home shear.

偷鸡不着蚀把米。

31. Keywords: electrorheological fluid, flow mode, mixed mode, shear mode, damper.

关键词：电流变液、流动模式、混合模式、剪切模式、阻尼器。

32. Function of shearing in sections, function of aligning light.

具有分段剪切功能,具有灯光对线的功能。

33. Shear strength of frozen soil.

冻结土体抵抗剪应力的强度。

34. Mitigating casing damage usually means reducing the amount of shear slip.

减轻套管损坏就是缩小剪切滑移量。

35. Clearance between shearing blades adjusted by hand wheel to be quicq, accurate and convenient.

刀片间隙由手动轮调整,迅速、准确、方便。

36. Our company mainly produced： cut to length line， slitting line， Shearing machine， Roll forming...

分类标题：矫直金属用机床|成型机...

37. The Contribution of Shear to the Evolution of a Convective Boundary Layer.

切变对对流边界层演变的作用。

38. The resolved shear stresses increase with the increasing of notch radii.

切口半径对持久寿命的影响作用非常大，切口半径越小，持久寿命越大。

39. The displacement of this shear zone was about 8km.

剪切位移量为 8 km左右.

40. The shear strenth is equal to the cohesion of substance.

剪切强度等于物质的内聚力。

41. Cell constructions for shear deformations.

剪切形变压力室的构造。

42. Shearing increases or decreases a color component by an amount proportional to another color component.

剪切是指按照与另一种颜色分量成比例的量来增加或减少颜色分量。

43. The chink section of relative rest must be taken as the reference datum of shearing leakance direction.

剪切泄漏的方向应以缝隙中相对静止的断面为参照基准;

44. The shear walls are arranged in both directions (across and longitudinally).

剪力墙双向设计(横向和纵向)。

45. Shear Springs are built on the diagonals of quad faces and provide some resistance to shearing forces in the cloth.

剪变弹簧,四边形面的对角线重合。提供抵抗布料剪切变形的力。

46. I'll go to see you after shearing.

剪完羊毛后，我去看你。

47. Shearing the sheep shearing n.

剪羊毛,剪取的羊毛。

48. Angoras may need special protection from the cold for about a month after shearing.

剪羊毛后，安哥拉山羊大约需要一个月的特殊御寒措施。

49. The shear dilatancy occurs only at low vertical load and is not obvious.

剪胀现象只在低垂直荷载时发生，且不明显；

50. Mechanical propert ties.Longit tudinal and shear vibrat tion.

参考名称: Met thods of test ting plast tics.

51. Splitting and bandknife shearing nachines.

参考名称: Tannery nachines.

52. A double trapezoidal specimen will generate shear debonding.

双梯形的试样将产生切变脱胶现象。

53. Q 11 series of shearing machines are applicable to shearing matal materials within 3 mm.Th...

发布者：何萍仙所在地：上海奉贤区行业：机械及行业设备职位：经理工作年限：五年以上

54. The gold mineralization controlled by SN or NNE trending shear z...

受近SN向或NNE向剪切带控制的金矿化属蚀变岩型金矿化。

55. Possessing inching.single and continuous shearing ,and interrupting and retuming at any position.

可进行点动、单次、连续操作，并可中途停机或回程。

56. Size of rear blok stop and shearing numbers has digitaldisplay apparatus.

后挡料尺寸及剪切次数有数字显示装置。

57. The only strain is a shear strain and the dilatation is zero, these waves are called shear waves.

唯一的应变是剪应变而没有膨胀，这种波叫剪切波。

58. Accordingly, it is important for us to improve the utilizationof the stress shearing technique.

因此，应力法剪切技术的推广相当重要。

59. Solids can support both shear and normal stress.

固体可以支撑剪应力和一般应力。

60. Based on the idea of effective shearing stress,the viewpoint of activation of surface discontinuities is put forward.

在不连续面有效剪应力概念的基础上,提出了巷道临空不连续面激活的观点。

61. For the cost comparison, specify costs for steel, shear studs and beam camber.

在价格的比较时，钢材、抗剪螺栓和梁拱的价格可以设定。

62. Thus fluid shear stress has been considered one of the atherogenic factors.

在动物研究中还发现切应力与内皮细胞增生程度有关。

63. The feed material is broken between the counter-rotating rolls and crushed by pressure and shearing stress.

在压力和切力的作用下,给料在彼此相向旋转的轧辊间破碎。

64. The feelings expressed in the drama, the drama pm, because shear.

在感情戏的表达方面，戏分被剪切的所剩无几。

65. Shear lag is reduced for prestress in serviceability limit state .

在正常使用状态下,预应力平抑了箱梁剪力滞效应。

66. In fluids, forces of tension and shear can often be ignored.

在流体中，张力和切力通常可以忽略不计。

67. At the same shearing flow,with xanthan content increase,the viscosity of starch pastes added.

在相同流动方式下,随着黄原胶含量的增加,淀粉糊的粘度增加。

68. The crushing process is carried out by pressure and shearing stress.

在相应的压力和切力作用下,物料得以破碎。

69. There will be no shear on this surface.

在该表面上没有剪切作用的存在。

70. In that it is flat with little or no shear lips.

在这种情况下，它是平的带有较小的或者没有剪切边。

71. Surface investigation showed that there were shearing, tensing and crush-pressing fissures.

地表调查表明滑坡出现了剪性、张性及挤压裂缝；

72. Computer Control System of Flying Shear Speed Based on Neural Network.

基于神经网络飞剪速度模型及计算机系统实现。

73. Extensive through-thickness shear causes crack-tip necking .

大范围的穿透厚度剪切引裂纹顶端的颈缩。

74. God temper the wind to shear lamb.

天无绝人之路。

75. Crop Shear Automatic Controlling of Hot Strip Mill in TISCO.

太钢热连轧飞剪自动控制。

76. We can reasonably estimate the shear modulus if we know the P-wave modulus.

如果P波模量已知，我们可以合理地估算出剪切模量。

77. Angora may need special protection from the cold for about a month after shearing.

安哥拉山羊在剪毛后的一个月内需要特殊的防寒措施。

78. Angoras may need special protection from the cold for about a month after sheering (shearing).

安哥拉羊在剪羊毛之后，需要大约1个月的特殊御寒保护。

79. Defines shearing and explains how to shear colors using a color matrix.

定义剪切并解释如何使用颜色矩阵剪切颜色。

80. Standard compaction test and undrained direct shear test were carried out.

实验方式是采取标准压实试验及不排水直接剪力试验。