spcc

spcc

1. The Environmental Protection Agency proposed modifications and compliance extensions for the oil Spill Prevention, Control and Countermeasure (SPCC) rule.

2005年12月5日，美国环保署提出对防止石油泄漏控制对策的修正和扩展。到2007年10月31日，所有设备必须准备或修正采取油品泄漏防治措施计划。

2. Both drawing performance and press performance of IF plate is better than those of08Al and SPCC,and08Al is better than SPCC. IF and08Al plates are more suitable for complicate stamping forming.

IF板的拉延性能和压延性能均优于08Al和SPCC板,而08Al又好于SPCC板,IF和08Al板更适用于复杂的冲压成型。

3. SPCC steel

SPCC钢

4. SPCC sheet

SPCC钢板

5. SPCC should seize the opportunity, make the best use of its advantages while bypass the disadvantages, and to improve the international competitiveness as soon as possible.

上港集箱应把握机会,扬长避短,尽快提升国际竞争力;

6. Conformity of ship repair of COSCO--theme report for the second meeting of"SPCC"

中远的修船整合--"斯佩克"第二次会议主题报告

7. , used materials for Nippon Steel, Kawasaki, one of steel imported materials, specifications have SECC, SPCC, SPHC, SUS, level of materials such as aluminum and Copper.

产品表面可处理烤漆、电著涂装、阳极处理、移印、电镀锌、镍、铬、锡、铜、金等。

8. Good agreement is found between the theoretical calculations and the results from the experiment that use SPCC deep drawing sheet and S754 Aluminum alloy sheet as workpieces.

以SPCC深拉深钢板和5754铝合金板的试验表明，理论计算与实测结果相近。

9. wight:100g;material: Q235，SPCC，ST37-2;

供货及时，合作意向强。

10. SPCC is always dedicating to provide first class products and service so as to make greater contribution for power grid construction.

公司将为用户提供一流的产品和最佳的服务,为电网建设作出更大的贡献。

11. After reorganization, the company is more vigorous and its SPCC Red-Plum brand florets are very popular in oversea market.

公司改制后，更加生机勃勃，SPCC红梅牌绢丝一直出口海外、俏销国际市场。

12. Production and management company licensing the SOHO clothing, "Cedar", SOHO licensing white filament, SPCC spun silk, silk satin Shuixie licensing reputation in the domestic and foreign markets.

公司生产经营的SOHO牌服装、“雪松”、SOHO牌白长丝、SPCC绢丝、水榭牌真丝绸缎在国内外市场享有盛誉。

13. What is the main difference when designs a blanking-die for either aluminum or SPCC?

冲铝件与冲铁件之冲裁模在设计上的主要差异为何?

14. 8. What is the main difference when designs a blanking-die for either aluminum or SPCC?

冲铝件与冲铁件之冲裁模在设计上的主要差异为何？

15. Cold-rolled SPCC Sheet

冷轧SPCC板

16. by Lu zhengang; Luo zhongming and Liu Yingxi et al.//Northeast Company of SPCC;

国家电力公司东北公司;大连理工大学;

17. by Du Dejin; Zhang Weimin and Zhang Xiuli//Large Dam Safety Su-pervi sion Cen ter of SPCC;

国家电力公司大坝安全监察中心;丰满水电厂;

18. by Xing Linsheng//Large Dam Safety Supervision Center of SPCC;

国家电力公司大坝安全监察中心杭州;

19. The change of general circulation, by influencing the regional weather and climate, is one of the important reasons for the anomalies and cooling of the air temperature in SPCC in spring.

大气环流的异常演变,通过影响区域天气气候,是造成川渝地区春季冷暖异常及气候变冷的重要原因之一;

20. Therefore, the strategy for internationalization by Shanghai Port Container Co., Ltd. (SPCC) is a valuable subject for study.

所以,上海港集装箱股份有限公司(以下简称“上港集箱”)国际化经营战略是非常值得研究的课题。

21. It’s made of high quality SPCC first-grade cold cut steel plate.

柜身采用日本进口一级电解镀锌钢板精制而成，内部承重，抗压强度出众；

22. In the case of the different lubrication method. the limiting cup-drawing coefficient of spcc & L4M is determined, and the lubrication mechanism with the polythene film is analysed.

测定了不同润滑方式下，SPCC和L4M板材的极限拉深系数，分析了采用了聚乙烯膜为润滑膜的润滑机理。

23. Feature:Only the safe section is fire-resistant ,Safe can be adjusted to 3 combinations index, It’s made of high quality SPCC first-grade cold cut steel plate.

特点:保险箱上层部分具有高强度耐火功能；密码锁可调至三个密码,保密性极强；特制柱琐设计，高度保密；

24. Technological experiments of flanging process were performed with cold-rolled steel sheet (SPCC) under ordinary lab condition.

用普通冷轧钢板SPCC在一般实验条件下进行了翻边工艺试验。

25. In Chapter 4, based on the analysis of the internal resources and abilities of SPCC and by means ofSWOT model, it therefore concludes that the environment is full of both challenges and opportunities;

第四章通过对上港集箱内部资源和能力的深入分析,运用SWOT分析,总结了各战略因素,指出市场环境机遇与挑战并存;

26. And the variations of 500 hPa height field in previous October is a forecast signal for the anomalies of spring air temperature in SPCC.

而前期 10月 5 0 0hPa高度场变化可作为川渝地区春季气温变化的一种预测信号

27. The Racks was made of the the "SPCC"chiIled rolI steeIs wlthgood technofogy.

选料及工艺力求精益求精，每一环节都非常讲究，所用板村均为SPCC冷轧钢板。

28. It's made of high quality SPCC first-grade cold cut steel plate.

采用优质spcc一级冷轧钢板制造而成；

29. DETAILS OF DOMESTIC MATERIALS REQURIED：SPCC，SPHC，SPHC-P，SPCED. Demand：Small of tolerance, smooth of sun face, easy to extrude, less of impurity. Volume of demand：1500-2000Ton /year

需求国产原材料品种、数量及其他要求：普通冷热轧钢板、酸洗钢板、高涨钢板、及深冲材料。要求：厚度公差较小，表面光滑，杂质少，可冲性较强。年需求1500-2000吨。