stepper
stepper
1. The four inputs (IN1 to IN4) can control a bipolar stepper motor in full- or half-step mode, or dc motors in forward, reverse, or brake mode.
(IN1到IN4)四种输入能够控制全步进与半步进模式下的双极步进电动机,或正转、反转和制动模式中的直流电动机。
2. Metal V-belt Continuously Variable Transmission; Electro-Hydraulic Control System;Digital Control Technology;Proportional Valve with Digital Control;High Speed On-Off Valve; Stepper Motor.
01金属带式无级变速器;数控技术;电液控制系统;高速开关阀;数控比例调压阀;步进电机。
3. The A3901 is a dual full-bridge motor driver, designed for low voltage portable applications involving bipolar stepper or brush dc motors.
A3901是一种全桥式电动机驱动器,用于有关双极步进或电刷直流电动机的低压便携应用。
4. The A3969 is designed to drive both windings of a two-phase bipolar stepper motor.
A3969可驱动两相双极步进电动机的两个绕阻。
5. DANCAD and DANCAM are shareware programs written by Dan Hudgins which provide 2/3dimension drafting and CNC stepper motor control respectively.
DANCAD和DANCAM属于共享软件编写的程序由丹哈金斯提供2/3dimension起草和数控分别步进电机控制。
6. Design of PWM Constant Current Division Drive Circuit of Stepper Motor
PWM细分恒流步进电机驱动电路的设计
7. SI6 6 axis stepper motor interface Provides stepper motor control and encoder input for up to 6 axes of motion. Scan program is controlled by the PC software.
SI6 6轴界面步进发动机提供步进发动机控制装置和译码器输入装置以实现6轴运行.扫描程序由计算机软件控制.
8. x ray stepper
x 射线步进重复晒片机
9. Tong Huai, Fu Guangjie, Huang Shenghua.Simulation analysis of the instant torque in steady state for the hybrid stepper motor[J].Minisize and Special Motor, 1997, (4) : 20-22.
[7]童怀,傅光洁.黄声华.混合式步进电机稳态运行时瞬时转矩的研究[J].微特电机,1997(4):20-22.
10. Liu Ming,Chen Baoqin.Electron beam/optical stepper mixes and matches lithography using i-line photoresist.SPIE 25th Annual Symposium on Micro-Lithography,2000
[陈宝钦,刘明,任黎明,等.电子束光刻技术.第十届电子束、离子束、光子束学术年会论文集,长沙,1999:48
11. Onebig Pry Series: Prying - stepper Bikes and Electrical Prying -Stepper Bikes!
一大撬动系列:步行式自行车、步行式电动自行车!
12. A stepper multi-axis control card based on ISA bus
一种基于ISA总线的步进电机多轴联动控制卡
13. Three-phase stepper
三相步进
14. Compared with the traditional control, the simulator of mariner's compass controlled by the stepper motor has such advantages as great precision and quick response.
与传统的遮光盘控制相比，使用步进电机驱动控制的航海罗经模拟器具有控制精度高、响应速度快等优点。
15. two-phase hybrid stepper motor
两相混合式步进电动机
16. Thus,it is neccessary to adopt stepper angle fraction.
为解决此问题，有必要进行步距角细分。
17. The article analyzes the tow ways of power amplifier TDA1521 driving stepper motor, and introduces briefly the method of computer drive control for stepper motor.
主要分析了用集成功率放大器TDA1521驱动步进电机时的两种工作方式,并简要地介绍了步进电机的计算机驱动控制方案。
18. 5 -phase hybrid stepper motor
五相混合式步进电动机
19. This paper introduces a kind of stepper motor driver with the key of MCU C8051F020.
介绍一种利用C8051F020单片机为控制核心的步进电机驱动器。
20. A kind of driving circuit of the stepper motor adopting permanent flow and cut waves technology was introduced,for which TRC was used to control the voltage of power in order to improve the frequencies characteristic of stepper motor.
介绍一种采用了恒流斩波技术的步进电机驱动电路 ,该电路的电源电压使用TRC (TimeRationControl)控制来改善步进电机的频率特性 ;
21. The paper also introduces stepper motor,IPC5375 interface card and Labwindows/CVI.
介绍了一种利用工控机和IPC5375接口卡,对步进电机实现高精度定位和速度控制的方案。
22. The structure and operation principle of a PM spherical stepper motor and its gimbal guideway orientation detection system were discussed.
介绍了一种永磁球形步进电动机的结构、工作原理及滑轨支架形式的位置检测系统。
23. The structure of permanent magnetic spherical stepper motor (PMSS) and the method of measuring rotor position based on machine vision are discussed.
介绍了永磁球形步进电动机的基本结构及基于机器视觉的球形电机位置检测方法。
24. This article introduces how to use L297 and L298 building a stepper motor driver circuit ,this design can make the hardware simple, software easy and the cost low.
介绍利用L297和L298芯片实现驱动步进电机的一种简单方法,利用该方法设计的步进电机驱动系统具有硬件结构简单、软件编程容易和价格低廉的特点。
25. Due to such problems as bigger stepper angle ,and low speed vibration,the us e of the stepper motor in high precision conditions is limited.
但是由于步进电机存在步距角较大及低速振动等问题，限制了它在高精度场合下的应用。
26. Keywords Position Control;Adaptive Control;SCM;Stepper Motor Driver;Raising Frequency Raising Voltage Drive;
位置控制;自适应控制;单片机;步进电机驱动器;升频升压驱动;
27. It is possible to drive unipolar stepper motors with bipolar drivers.
使用多极驱动器可以驱动单极步进马达。
28. Connect the motor drives, the stepper motors and the main power supply to the Control Unit Chassis according to the Assembly and Wiring Diagram.
依照装配及接线图接通电动驱动器、步进电动机及主电源,供给控制部件底盘。
29. stepper stall detector (SSD) block
停转检测模块
30. Solar energy;Two-axis solar tracking system;Open loop control;Microprocessor (AVR);Stepper motor;Photo-Sensor
关键词:太阳能;二个轴太阳跟踪系统;开环控制;微处理器(AVR);步进马达;传感器
31. This paper has certain reference value to design and control of reluctance stepper.
其结果对于反应式步进电动机的控制及设计有一定的参考价值。
32. A Study on the Acceleration and Deceleration Motion of Stepper Motor in Punch
冲床步进电机加减速运动的研究
33. Control of Stepper Motor in the Contour Line Test
凸轮廓线测量仪中步进电机的控制
34. Design and Implementation of Distributed and Multi-Serial-Port Control for Stepper Motor
分布式多串口步进电机控制的设计与实现
35. Developing of Illuminating Optical System in Stepper(DSW)
分步重复投影光刻机(DSW)照明光学系统的研制
36. Using DSP s high speed operation performance and its inner control unit,simplified the system s software and hardware,achieved stepper motor s high precision subdivision drive.
利用DSP高速运算性能以及内部控制单元简化了系统的软硬件,实现了步进电机的高精度细分驱动。
37. Research on the Control System of Stepper Motor Based on MCU
单片机的步进电机控制系统研究
38. reluctance stepper
反应式步进电动机 磁阻步进电动机
39. Error is noncumulative as long as pulse-to-step integrity is maintained by the stepper motor.
只要步进电机维持完整步进脉冲,错误不会累积。
40. variable reluctance stepper motor
可变电抗步进电动机
41. variable-reluctance stepper motor
可变磁阻步进电动机
42. excitement of choosing a showy grey stepper for May's brougham.
后来为了给梅的马车选一匹体面的灰色快马，他愉快地激动了一阵。
43. "Fine stepper, wasn't she?
嘉莉注意看着被推崇的优美姿态。
44. four-phase stepper motor
四相步进电动机
45. So it has momentous theoretical and practical significance for the research about the stepper motor in the control system to find an easier and more economic transducer to obtain the rotor position.
因此寻找一种更加简便、经济的传感方式获取位置信号，对于步进电机在控制系统中的应用有着重要的理论与实际意义。
46. With Domestic lead spindle motor, powerful stepper driving system, graceful bed frame structure.Beautiful and durable dustproof configuration, all show a good quality and feature.
国内一流品牌主轴，大步进驱动系统，优雅的床体结构，辅以美观耐用的防尘装置，更加彰显品质。
47. The function of the design is tested on EDA experiment platform, the result indicated that it can realize the stepper motor velocity control.
在EDA实验平台对设计进行了功能验证，实验结果表明，该方法可实现步进电机可变速度的控制。
48. It will be introduced to control the frequency of Stepper Servomotor by the Way of the Interrupted Interception.
在此介绍用中断拦截的方式实现对步进伺服电机的变频控制。
49. In this years some earlier moment, we are in no less than Japan sees on sale of machine of 1 line photoetching, stepper photoetching machine still has certain yield.
在该年早些时候,正如我们在日本1线光刻机销售上看到的,stepper光刻机仍拥有一定产量。
50. Design of Stepper Motor Subdivision Control System Based on ARM
基于ARM的步进电机细分控制
51. The Design of Stepper Motor Control-drive Card Based on CAN Bus
基于CAN总线步进电机控制驱动卡的设计
52. Design of Control System of Stepper Motor Based on DSP
基于DSP的步进电机控制系统设计
53. The design of impulse signal controller in stepper motor based on FPGA
基于FPGA实现步进电机脉冲信号控制器设计
54. The Design of Stepper Motor Driver by Using LPC2132 and MTD2009
基于LPC2132与MTD2009的步进电动机驱动器设计
55. PCC Based Stepper Motor Control and Application
基于PCC的步进电机控制及应用
56. Design of Auto Acceleration and Deceleration Control for Stepper Motor Based on PLC
基于PLC的步进电动机自动升降速控制设计
57. The Design of Soft Start and Stop Control for Stepper Motor Based on PLC
基于PLC的步进电动机软起、停控制设计
58. Distributed Control System for Stepper Motor Using Serial Communication
基于串行通信的步进电机小型集散控制系统
59. THE CONTROL OF A PERMANENT MAGNET SPHERICAL STEPPER MOTOR BASED ON THE CODER OF OPTOELECTRONIC SENSORS
基于光电传感器编码的永磁球形步进电机运动控制
60. Analysis of Using Power Amplifier to Drive Stepper Motor
基于功率放大器的步进电机驱动控制
61. THE CONTROL OF A PERMANENT MAGNET SPHERICAL STEPPER MOTOR BASED ON WEIGHTED GRAPH
基于加权无向图的永磁球形步进电机运动控制
62. The Design of Quarter-phase Stepper Motor Driver Based on Dual Bridge Driving Circuit
基于双极性桥式电路的两相制步进电机驱动器设计
63. Research on Control of Stepper Motor Acceleration-Deceleration Based on Minimum Deflection Algorithm
基于最小偏差法的步进电机速度控制方法研究
64. Stepper Motor Micro-Stepping Driver Based On Current Feedback
基于电流反馈的步进电机微步驱动器
65. The Subdivided Controlling and Optical Measurement Technology of Stepper Motor Based on Current Vector Even Rotating with Uniform Amplitude
基于电流矢量恒幅均匀旋转的步进电机细分控制及光学检测技术
66. Research on Focus and Level System for Stepper Based on Linear Array CCD
基于线阵CCD的光刻机调焦调平系统的研究
67. A High Speed Control Algorithm of Multiple Stepper Motors
多个步进电机的高速控制算法
68. Such as stepper motor drive servo motor or the location of single or multi-axis control module.
如可驱动步进电机或伺服电机的单轴或多轴位置控制模块。
69. If the failure was caused by water ingress, replace the clean-air duct and the defective stepper motor,and any other components damaged by the water, with the latest replacement part.
如果故障是由于进水引起的,请用最新的零件更换清新空气管道和有故障的步进马达和其他一些被水损坏的部件
70. Mount the stepper motors to the feed mechanism of machine tool.
安装步进电动机供给车床的机械装置。
71. The chip microprocessors system for controlling stepper angle fraction of the stepper motor is designed,studied,debugged and analyzed in this paper.
对步进电机步距角细分单片机控制系统进行了设计与研究,并且对软件程序进行了调试与试验分析。
72. The chip microprocessors system for controlling stepper angle fraction of the st epper motor is designed,studied,debugged and analyzed in this paper.
对步进电机步距角细分单片机控制系统进行了设计与研究，并且对软件程序进行了调试与试验分析。
73. Stepper motor is used in the PLC control system of ion electrostatic accelerator.
将步进电动机应用于离子静电加速器PLC控制系统。
74. In hybrid stepper motor, the back EMF of stator winding is function of rotor position, continuous rotor position is obtained from thefunction.
就混合式步进电机而言，定子绕组的反电势是转子位置的函数，从而可以解算出连续的转子位置信息。
75. Optical Design of i-Line Stepper for Microlithography[J].
引用该论文 林大键,李展,周崇喜.
76. The Intelligent Controlling System for Stepper Motor with Micro-Torque
微小力矩步进电机的智能控制系统
77. Italy RTA stepper motor actuator.
意大利RTA步进电机动器。
78. We can offer slits with or without water cooling so they can be used on the entrance or exit. Motorised slits are also available with external stepper motor drive.
我们可提供带或不带水冷的狭缝,它们可用于入口或出口。也提供外置步进马达驱动的狭缝。
79. An Investigation on Pressure- Vacuum Balance Air- Foot of Positioning Stage for Wafer Stepper
投影光刻机工作台的压力-真空平衡气足研究
80. The Key Craftwork and Technique of Assembling and Adjusting of Projective Lens of Stepper
投影光刻机镜头的装校关键工艺与技术
