tapered
tapered
1. The idea of the SBH antenna comes from the tapered slotline and brown-woodward antennas.
SBH型超宽带天线的设计思想来源于渐变式微带缝隙天线和领结形天线。
2. SKF produces double row tapered roller bearings of the TDI configuration mainly in the designs described in the following.
SKF主要按下面说明的设计生产TDI配置的双列圆锥滚子轴承。
3. SKF four-row tapered roller bearings are delivered as ready-to-mount bearing units with an axial internal clearance adapted to the actual application.
SKF四列圆锥滚子轴承作为快装轴承装置供应,轴向内部游隙根据实际应用调节。
4. The inner rings with roller and cage assembly and outer rings of SKF tapered roller bearings having the same designation are interchangeable.
SKF圆锥滚子轴承中型号相同的带滚子和保持架组件的内圈和外圈可互换。
5. The tapered gear box and universal shaft transmit smooth power and are simple to assemble and disassemble.
“锥齿轮箱＋万向轴”动力上台，传动可靠，装拆方便。
6. The stainless steel seat ring is manufactured with a slight inside taper.
不锈钢阀座密封环制成内部锥度。
7. Tapered rule A rule, with or without floral decoration, which is thicker in the middle than at the end. Usually used to divide parts of page.
两边较中间幼的线条,中间部分有些加上花饰,用来分开页面。
8. Countershaft assembly uses tapered bearings to reduce end play and extend gear life.
中间轴组合使用锥形滚柱轴承以减少轴向间隙并延长齿轮使用寿命。
9. Our main products are spherical roller bearing, tapered roller bearing and deep groove ball bearing.
主要生产圆锥滚子轴承、调心滚子轴承、深沟球轴承。
10. Taper of bore in spindle center sleeve morse No.
主轴套内孔锥度。
11. Taper of hob arbor fitting Morse no.
主轴锥孔。
12. Taper of hole in spindle nose MT No.
主轴锥孔锥度。
13. Hollow,soild,tapered heavy section precision pieces, the section of them are round,rectangle,square.
产品说明 ： 空心，实心，多台阶大型轴类精锻件，截面形状可为圆形，方形，矩形等。
14. The new structure of a taper pin connection with external thread is introduced.
介绍了一种外端带有螺纹的圆锥销联接的新型结构。
15. He has tapered down his smoking from two to one package of cigarettes a day.
他已从一天抽两包烟减少到一天抽一包。
16. He tapered the stick with a knife.
他用小刀把棍子的一端削尖。
17. He tapered the end of the fence post with an axe.
他用斧子把栅栏的一头削尖。
18. His wrists are narrow and his fingers tapered and deft, like those of a pianist or a surgeon.
他细细的手腕和灵巧锥形的手指，可以与音乐家或外科医生媲美。
19. The following photos show the blade thickness and distal taper.
以下的是比较不同刀剑的刃厚及其变化。
20. However, some bearings with a tapered bore 1:12 can be supplied (fig 18).
但是,一些轴承可提供锥度为1:12的圆锥孔设计(图18)。
21. Do you taper the tops and backs, are they thinner along the edge?
你会逐渐地打薄面板和背板,而在沿着外围的地方会打的更薄吗?
22. You would better taper off the amount of time given to rest .
你最好逐渐地减少休息时间。
23. Glass tube type where used shall be ribbed, beaded or flat but not plain tapered.
使用玻璃管型的地方应是有棱纹、珠状或扁平型而不是单纯的锥形。
24. AAA Bearing LTD offers Offers to Tapered roller bearings, thrust ball bearing and Self-aligning bearing.
公司提供大量的摆动轴承、自动调心轴承和夹紧套筒。
25. They come in an array of shapes, including spiky stilettos, tapered cones, sloping wedges and thick wooden posts.
其形状也是各有千秋：尖头细高跟、锥形跟、楔形坡跟、粗大的木制鞋跟，不一而足。
26. The reason is that a quietly tapered phrase ending is achieved by lifting the weight of the arm rather than by lowering it into the keys.
其理由是逐渐减弱的乐句完成通过提高手臂的重量比下降手臂的重量传送到键上要好。
27. Elevation view of a tapered key with optional gib head.
具有可选钩头的锥形键的正视图。
28. An internal centre aligns the pinion shaft. The clamping function occurs by means of a tapered collet activated by machine hydraulics.
内部的顶心用于小齿轮定心.筒夹通过机床液压系统操纵,实现夹紧,带动小齿轮轴转动.
29. Icicles are formed when water dripping from an object freezes, forming long, tapered spikes.
冰柱是由从物体上滴下来，冻结成长锥状的水形成的。
30. To shape or enlarge(a hole) with a tapered, serrated tool.
凿孔扩大用带齿的尖的工具钻或扩大（孔）
31. You can choose ball, bullnose, flat and a variety of taper cutters.
刀具除标准球、平、圆鼻刀外，亦可使用任意角度成形尖刀。
32. To shorten and taper(hair) by cutting and thinning.
剪短，剪薄剪成薄的以使（头发）变短变细、变薄
33. To shorten and taper (hair) by cutting and thinning.
剪短，剪薄：剪成薄的以使（头发）变短变细、变薄
34. Financial aids generally taper off after the first year of college.
助学金通常在大学一年级之后逐渐减少。
35. Ultra-high precision cylinder bearings with high-quality needle roller bearing or tapered roller bearing to ensure machine superb durability.
印刷滚筒轴承均采用进口高精度滚针轴承或圆锥滚子轴承,确保机器的稳定可靠及耐用性。
36. Even if scrappage schemes are continued or tapered, there may not be many buyers left who meet the qualifications.
即便旧车报废计划得以继续实行或者逐渐减少，剩下的符合条件的购买者已经为数不多了。
37. PIPE FITTINGS WITH DOUBLE TAPER SLEEVES. COUPLING DIMENSIONS.
双锥套管道接头。连接尺寸。
38. They can be straight or bent or tapered to desired shapes to meet space requirements with maximum light transmission.
可以是直条型或弯曲或锥型至任何所需之形状以符合机构设计时对空间的要求。
39. Leaf apex gradually acuminate or abruptly tapered and indistinctly mucronate; winter bud scales early deciduous or some persistent at base of branch.
叶顶端缓尖或急尖并且尖端模糊；冬天芽鳞片提早脱落或有一些仍残留在枝条的基部。
40. With proper use of baffles or in tapered vessels, this undesirable behavior can be reduced.
合理地应用挡板或在锥形流化床中，可减轻这种不良的性状。
41. The stifles are moderately bent and taper smoothly into the hocks.
后膝关节角度恰当，向下逐渐地、平滑地变细，与飞节连接。
42. I'd like it tapered in back.
后面打薄些。
43. Well, the leg shall is taper all down the side seam.
喔，裤腿应该沿边缝逐渐收
44. A small cylindrical or tapered pin, as of wood, used to fasten things or plug a hole.
圆木栓，木钉用来把东西锁住或打孔的圆柱状或两头渐细的木制钉
45. Capsule ovoid-conical, slightly compressed, tapered apically, almost entirely hirsute, apex obtuse and emarginate.
圆锥形蒴果卵球形，顶部的稍压扁，渐狭，几乎完全具粗毛，先端钝的和微缺。
46. Tapered bearing seatings are checked using ring gauges, special taper gauges or sine bars.
圆锥形轴承基座则采用环规、专用锥度规或正弦规检查。
47. How many heights has a taper?
圆锥有多少条高?
48. Taper A is taller than taper B. Measure its height from top down.
圆锥比圆锥高。从顶点向下量。
49. Tapered roller bearings are generally used to support combined load mainly aonsisting of radial load.
圆锥滚子轴承主要用以承受以径向载荷为主的径向与轴向联合载荷。
50. Tapered roller bearings have tapered inner and outer ring raceways between which tapered rollers are arranged.
圆锥滚子轴承有圆锥形内圈和外圈滚道,圆锥滚子排列在两者之间。
51. Tapered leading edges with blunt tips.
圆锥领先优势钝性小费。
52. The carafe is tall, tapered and elegant, yet quickly and contemporary like an inverted rocket.
在一杯高大，锥形和优雅，但很快和当代像倒置的火箭。
53. After isolated areas of severe weather over Taipei, the region's rainfall has tapered off a bit.
在台北的某些局部地区经过一场恶劣的气候之后，该区域的降雨量已逐渐缓和。
54. Moderately heavy in appearance and strongly tapered.
在外观上看重量适中，呈有力的锥形。
55. Bearings with a tapered bore are used when an interference fit is required for the inner rings on the roll neck, e. G. When rolling speeds are high.
在轧辊轴颈上的内圈需要过盈配合时,例如轧钢速度高时,使用带锥形孔的轴承。
56. Outer Scale (Fig. 6) - This scale is a micrometer-type scale marked 0-9 at the tapered base of the red handwheel.
外刻度（图6）-这个刻度是测微计类型刻度，在红手轮的锥形底座上标注0-9。
57. HIGH CAPACITY. Automotive hubs on taper roller bearings.
大承载量：小型滚轴轴承上的自动轮毂。
58. The rain tapered after about 30 minutes but a cold headwind hampered the nearly 23,870 runners.
大约30分钟后，雨逐渐变小，但是冷风阻碍近23,870个赛跑者，
59. Beside Sister Perpetue, she was the taper beside the candle.
她在佩尔佩迪姆姆身旁，就好象牛脂烛旁的细蜡烛。
60. It consists of a vertical, tapered glass tube containing a movable weight.
它在垂直的锥形的玻璃管内装一个可以活动的重物。
61. IMPAC is complicatedly structured like a network being composed of ribbed silk, rod body and tapered parts.
它是由肋形丝，棒体、条体和尖形物组成错综复杂的网状结构。
62. For bearings having a tapered bore, inner rings are always mounted with an interference fit.
对于圆锥孔轴承,内圈的安装始终采用过盈配合。
63. Where tapered roller bearings are concerned, this interchangeability also extends to the outer rings and inner ring assemblies.
对于圆锥滚子轴承,互换性还扩大到外圈和内圈组件。
64. Techniques to resolve the difficult cannulation cases include tapered tip catheter, guide wire, papillotome, and precut endoscopic papillotomy (EPT).
对于较困难之病例，尖细型管子，导引线方法，电刀及内视镜乳突先前切开术乃解决方法。
65. The demand for black-and-white television has tapered.
对黑白电视机的需求量已经逐渐减少。
66. Production of small vehicles was tapered off.
小型车辆的生产逐渐减少了。
67. Small bearings may be driven up onto a tapered seating using a nut.
小型轴承可使用螺母,将其推进至圆锥基座。
68. The pupil tapered one end of the pencil with a knife.
小学生用刀把铅笔的一头削尖了。
69. A few relatively wide bearings have inner rings with a tapered bore of 1:30.
少数相对较宽的轴承带锥度为1:30的内圈。
70. Taper of Hole in Tailstock No.
尾座套筒锥孔。
71. Taper bore of tailstock barrel No.
尾座套筒锥孔锥度。
72. The tail tapered to a rounded tip.
尾部越来越细，最后成了个圆尖。
73. Is there any taper tap in the house?
工具房里有公锥吗?
74. Look at the computer. How many centimeters are there in your taper?
师：看电脑是怎样测量圆锥的高。量一量自己的圆锥的高是多少厘米。
75. Bearings with a tapered bore are always mounted with an interference fit.
带圆锥孔轴承始终以过盈配合安装。
76. A steel tool with a cylindrical or tapered shank around which longitudinal teeth are ground, used for smoothing the bores of holes.
带有圆柱形或锥形手柄的钢制工具,周围的径向齿是圆形的,用来打磨孔的内径。
77. Bearing with tapered bore, taper 1:12, intermediate ring between the outer rings and pressed steel cages (fig 14).
带有锥度为1:12的圆锥孔、外圈之间的中隔圈和钢板冲压保持架的轴承(图14)。
78. A drop of water was cut in half by a plane passing through its bulbous front and tapered tail.
平面将水珠的鳞茎状前锋和锥状尾巴的分成两半。
79. Tubes shall be provided with tapered ends, tapere-cut angle 45 degrees.
应提供45度锥角的锥形端头管子。
80. Investigation on Focusing Performance of Tapered and Lensed Fiber[J].
引用该论文 刘旭,陈麟,蔡纯,肖金标,张明德,孙小菡.
