taperingly

taperingly

1. It dilates easily and won't bring too much wound with the very smooth anterior taper.

2、前端圆锥顺滑，扩张顺利，创伤小，减轻患者痛苦。

2. Murray overcome thrust fault of cloth Mu taper to discover uraniferous mineral in laborious.

Murray先生在辛克布姆锥形冲断层发现含铀矿物。

3. The two most common taper pipe threads used in the United States are NPT and NPTF.

NPT和NPTF螺纹是两种美国最常用的锥管螺纹。

4. Designed to be used with drill, reamer and other shanks which have a morse taper shank.

[标签:莫式锥,式锥柄,锥柄钻,柄钻承,钻承口][打印][关闭

5. The Pucara has a low wing with no taper or dihedral on the broad center section.

“普卡拉”的低单翼宽大平直，没有后掠角。

6. A wax taper was placed in his hand but his fingers would not bend, so it was placed between them and held up for him.

一个小蜡烛放在右手手指但不会重水因此它们之间,举起放在他。

7. Let's do an experiment: Two pupils, please. Please pour into a cylinder with a taper full of water. How many times can we fill up the cylinder?

下面我们来做一个实验。请两个同学上来演示,将圆锥装满水倒入圆柱,几次可以将圆柱装满?

8. The stainless steel seat ring is manufactured with a slight inside taper.

不锈钢阀座密封环制成内部锥度。

9. Our main products are taper roller bearing, spherical roller bearing and deep groove ball bearing.

主要生产圆锥滚子轴承、调心滚子轴承、深沟球轴承等。

10. Taper of bore in spindle center sleeve morse No.

主轴套内孔锥度。

11. Taper of hob arbor fitting Morse no.

主轴锥孔。

12. Taper of hole in spindle nose MT No.

主轴锥孔锥度。

13. A taper or acute protection tube made from stainless steel is on the front of the products.

产品前端配有锥形或锐角不锈钢保护管。

14. Hong Kong IPOs are now springing back from the slowest first half for six years, but flows could taper off before long.

今年上半年，香港股市的IPO跌至六年来的最低位。现在，这里的IPO正从这一低位强劲反弹，但其势头可能很快又会减弱。

15. The new structure of a taper pin connection with external thread is introduced.

介绍了一种外端带有螺纹的圆锥销联接的新型结构。

16. In this paper,we introduce the analysis and design of a new photoelectricity taper tester.

介绍了一种新研制的锥度检查仪,并就其测量不确定度进行了评定。

17. We first introduced NC machining technology of keyless(shaped shaft-hub)connection parts.Then we present the result of gapless taper fitting of the connection achieved by us.

介绍了成形(无键)联接的轴和毂孔的数控车削技术，取得了带锥度无间隙配合的结果。

18. The control algorithms about DSU,Taper Head,Taper Tail are introduced to ensure flatness by maintaining steady rolling force.

介绍了采用动态设定DSU、Taper Head、Taper Tail控制算法以维持轧制力恒定来保证板形。

19. To introduce the structure characteristics of dismoumtable drawing die having taper fit.

介绍可拆卸式拉丝模具有锥形配合的结构特点;

20. The sides should taper gradually and smoothly from the ears to the end of the black nose, without prominent cheek bones or pinched muzzle.

从耳朵到黑色鼻镜方向，头部逐渐变细，但后脑不向外扩张（厚脸皮），口吻也没有突然变窄的样子（象被截断的口吻）。

21. Foreface or muzzle is of equal length or slightly shorter than skull when viewed in profile, should taper gradually from stop to tip of nose.

从轮廓上观察，前脸或口吻：长度与脑袋的长度大致相同，或略短，口吻呈锥形，从止部到鼻尖方向逐渐变窄。

22. He glanced at his own white taper fingers, shuddering slightly in spite of himself.

他瞧瞧自己白而修长的手指，不由自主地微微打了个寒噤。

23. The following photos show the blade thickness and distal taper.

以下的是比较不同刀剑的刃厚及其变化。

24. NSN Bearing initiated from deep groove ball beairngs and taper roller bearings and quickens its steps in development recent years.

以生产中小型轴承起家的通用公司在近年来更加坚定了发展步伐。

25. However, they expect its earnings growth to taper off in the current quarter due to strengthening local currency and seasonally higher marketing costs.

但分析师们预计，三星电子的利润增速第四季度会逐渐慢下来，原因是韩圆走强以及经季节性因素调整后的营销成本出现上扬。

26. But stubble lacks the finer taper of unshaven hair, giving the impression of coarseness.

但是，未刮净的汗毛茬会给人以粗糙的感觉。

27. Do you taper the tops and backs, are they thinner along the edge?

你会逐渐地打薄面板和背板,而在沿着外围的地方会打的更薄吗?

28. You would better taper off the amount of time given to rest .

你最好逐渐地减少休息时间。

29. Probe the kids to know the taper, hold its features and understand its plan.

使学生认识圆锥，掌握圆锥的特征，会看圆锥的平面图。

30. A fiber taper can evanescently couple to whispering gallery modes (WGMs) in a planar silica microdisk for observing the optical properties of the microdisk cavity.

使用光纤锥可以通过其产生的倏逝场，来耦合微盘腔中的回音壁模式，从而获得对微盘腔光学性质的考察。

31. So the effects of self-fields should be considered in designing the Ubitron amplifier. Using wiggler taper, the efficiency is up to 12.3%.

使用摇摆器幅值渐变,器件工作效率从10.9%提高到12.3%。

32. The internal spline (internal gear) with reversed taper teeth is the general method used by autocar and tracter industry to prevent the meshing from dislocating.

倒锥齿内花键(内齿轮)是汽车、拖拉机为防止脱档而常用的方法。

33. Stop: stop rotating output shaft, cam rollers contact roller cam bearings taper ribbed support of the re-direct.

停止：出力轴停止旋转，凸轮滚子接触滚子轴承式凸轮锥度支撑肋的重直部分。

34. Total runout requires determining the full indicator movement over the entire feature.Total runout, therefore, detects any changes in size, i.e. barreling, waisting or taper.

全跳动是对整个被测圆柱（旋转和移动）进行检测，全跳动能检测到尺寸的变化（例如，桶形，腰形或锥形）。

35. To be fair, the Mustang has been on sale for several months more than the Camaro, so the early demand surge may taper off as time goes on.

公平地说，野马已销售数月超过卡玛洛，因此早期的需求激增可能会逐渐减少随着时间的推移.

36. It has no effect on the thickness or rate of hair regrowth. But stubble lacks the finer taper of unshaven hair, giving the impression of coarseness.

其实这对毛发的浓密度和再生速度都没有影响，但修剪后的新毛茬末端不像未修剪时那样逐渐变细，所以给人感觉变粗了。

37. You can choose ball, bullnose, flat and a variety of taper cutters.

刀具除标准球、平、圆鼻刀外，亦可使用任意角度成形尖刀。

38. Graduation: laborer rotating, contact roller cam roller cam bearings taper ribbed support of the curve.

分度:出力轴旋转,凸轮滚子接触滚子轴承式凸轮锥度支撑肋的曲线部分。

39. Effect of main parameters on the maximum reduction is analysed.It is significant to make forming technology of deep tine taper hole formed by open-die extrusion.

分析了各主要参数对极限变形程度的影响规律,对指导制定深小锥孔件开式冷挤压成形工艺具有重要意义。

40. The effects of structure of the coils and taper of the amplifier on the green density and sintered density of ceramic powder PZT were analyzed.

分析了线圈匝数和放大器锥角等因素对压坯和制品致密度的影响。

41. Pulleys - Taper lock bushes - Chains Monobloc - Transmission belts Rubber sheets &carpets for...

分类标题：橡胶和塑料管及管道|皮带轮...

42. Coronal of the vi babble before coronal of anterior teeth tooth is too small very small or show taper, when josh grinningly very not beautiful.

前牙牙冠过小 前牙牙冠很小或呈锥形,说笑露齿时很不美观。

43. To shorten and taper(hair) by cutting and thinning.

剪短，剪薄剪成薄的以使（头发）变短变细、变薄

44. To shorten and taper (hair) by cutting and thinning.

剪短，剪薄：剪成薄的以使（头发）变短变细、变薄

45. Financial aids generally taper off after the first year of college.

助学金通常在大学一年级之后逐渐减少。

46. The taper of elevators is usually slight, and the difference between the two values is generally small.

升降舵的根梢比通常较小，因而两个值之间的差别一般不大。

47. Museums often enjoy cheeringly high visitor numbers in the first year or two, but then attendance tends to taper off.

博物馆的访客量往往在第一、二年有较高的人数，随后便趋于逐年减少。

48. A single taper flickered in Ambreene's bedchamber as she shot the door bolt into place with steady hands.

卧室的门被牢牢的插上，一只小细蜡烛在里面闪动。

49. The kerf taper is approximately proportional to the traverse speed, but pressure and traverse speed have an inverse effect on it.

压力越大余纹角度越小，靶距对余纹角度影响不大，余纹曲线相互之间大体平行，且不规则；

50. PIPE FITTINGS WITH DOUBLE TAPER SLEEVES. COUPLING DIMENSIONS.

双锥套管道接头。连接尺寸。

51. The technical principle of taper cutting of HS-WEDM was introduced.The parameters setting method and the program processing of taper cutting based on WEDM machine were analyzed.

叙述了高速走丝电火花线切割机床锥度切割的基本原理,对锥度切割中的几个主要参数进行了分析和理论计算,编制了相应的程序模块,并给出了计算和编程处理实例。

52. Muzzle--Muzzle of medium length and medium width, neither coarse nor snipy;should taper toward the nose and be in proportion to the size of the dog and the width of skull.

口吻：中等长度、中等宽度，既不粗糙、也不过长，向鼻镜方向略呈锥形，与整体大小及脑袋的宽度成正确的比例。

53. Moreoer, infliximab use did not increase the proportion of patients who were able to taper their steroid dosages without relapse.

另外，使用英夫利昔单抗不会增加减少类固醇用量而不复发的患者比率。

54. Tell you to let beautiful hair arrange slippery 3 big principles, teach you to make a taper of a running fire divide very complaisant bright Li Xiufa!

同时也能让自己有份焕然一新的好心情。

55. It also requires a degree of skill to taper the dart to achieve a smoothly contoured garment.

同时还需要一定的技术水平来缝合省道从而获得一个平顺的成衣。

56. The stifles are moderately bent and taper smoothly into the hocks.

后膝关节角度恰当，向下逐渐地、平滑地变细，与飞节连接。

57. Drill Type Bit Diameter Buttons,mm Taper Water Hole Part No. mm in Guage Front Angle Button Bits Flat Face&nbs...

品牌: 三山 . 原产地: 中国 . 产品描述: 专业生产各种规格的重型釬具系列产品。

58. Well, the leg shall is taper all down the side seam.

喔，裤腿应该沿边缝逐渐收

59. How many heights has a taper?

圆锥有多少条高?

60. Taper A is taller than taper B. Measure its height from top down.

圆锥比圆锥高。从顶点向下量。

61. Taper roller bearigns are generally used to support combined load mainly consisting of radial load.

圆锥滚子轴承主要用以承受径向载荷为主的径向与轴向联合载荷。

62. Wedge mechanism was adopted in piercing die to achieve side piercing,and the positioning of taper pipe depended upon the conical surface of blanking die itself.

在冲孔模中选用了带有楔角的斜楔机构来实现侧冲,并利用冲裁凹模自身的锥形面实现了锥形管的定位。

63. The code of manufacturer (YS) and the date of manufacture (month and year) are to be stamped warm during the taping operation at middle of the taper.

在封箱时，必须把制造商编码（YS）以及制造日期（月和年）敲在胶带的中间。

64. Quick and simple clamping is achieved by using a friction taper that provides sufficient torque transmission.

在有足够的带动转矩时,采用摩擦圆锥体使夹紧快速又方便.

65. Within the gear carrier unit, taper roller bearings are employed almost universally for carrying the input pinion.

在齿轮承运人股，圆锥滚子轴承受雇几乎普遍进行输入齿轮。

66. HIGH CAPACITY. Automotive hubs on taper roller bearings.

大承载量：小型滚轴轴承上的自动轮毂。

67. Without the misalignment, coupling efficiency increases with the decreasing of taper length.

失配不存在时，耦合效率随著锥长的增加而减小。

68. Beside Sister Perpetue, she was the taper beside the candle.

她在佩尔佩迪姆姆身旁，就好象牛脂烛旁的细蜡烛。

69. Variety of scented and unscented candles as well as candle holders.Tea lights, floating, pillar, votive and taper candles all available.

如带熏香和无味的蜡烛，烛台，漂浮蜡烛等产品。

70. If the taper support ribbed surface and the cam cam rollers have not Sleek, will be for damage to the division.

如果锥度支撑肋的凸轮表面和凸轮滚子之间有不滑顺情况，则会损害到分割器。

71. In this method,a new type of thick aperture with a toroidal taper was made to block neutrons(I4MeV).A two-dimensional scintillator array was used as a sensitive neutron detector.

它针对中子射线穿透率高的特点，采用一个圆形双圆锥型厚孔径对聚变的靶目标产生高能中子射线投影，用塑胶闪体探测器接收。

72. It has no effect on the thickness or rate of hair regrowth.But stubble lacks the finer taper of unshaven hair, giving the impression of coarseness.

实这对毛发的浓密度和再生速度都没有影响，但修剪后的新毛茬末端不像未修剪时那样逐渐变细，所以给人感觉变粗了。

73. The connected curve equation after spreading connected joint of taper container are derived, the new blanking method with computer is put forward.

导出了圆锥形容器接管交线在展开接管表面后的曲线方程，提出了用计算机绘制其交线，即放样下料的新方法。

74. Other taper degree and bit diameter are available upon request by Customers.

尾孔锥度及大径可以根据用户具体情况制定。

75. Taper of Hole in Tailstock No.

尾座套筒锥孔。

76. Taper bore of tailstock barrel No.

尾座套筒锥孔锥度。

77. Is there any taper tap in the house?

工具房里有公锥吗?

78. Materials: 4 votive candles, 1 taper candle, a chalice with salt-water, a bowl of sand, a cone of sandalwood incense, matches.

工具：四只许愿蜡烛、一只细蜡烛、适量的盐水装在酒杯当中、一碗沙、一搓檀香料、火柴。

79. Look at the computer. How many centimeters are there in your taper?

师：看电脑是怎样测量圆锥的高。量一量自己的圆锥的高是多少厘米。

80. The former is deposited by smoothness growth model of smaller molecule, the latter by taper growth model of bigger molecule.

并提出前者为小分子平滑生长模型、后者为大分子锥状生长模型。