tapers

tapers

1. It dilates easily and won't bring too much wound with the very smooth anterior taper.

2、前端圆锥顺滑，扩张顺利，创伤小，减轻患者痛苦。

2. Murray overcome thrust fault of cloth Mu taper to discover uraniferous mineral in laborious.

Murray先生在辛克布姆锥形冲断层发现含铀矿物。

3. The two most common taper pipe threads used in the United States are NPT and NPTF.

NPT和NPTF螺纹是两种美国最常用的锥管螺纹。

4. Designed to be used with drill, reamer and other shanks which have a morse taper shank.

[标签:莫式锥,式锥柄,锥柄钻,柄钻承,钻承口][打印][关闭

5. The Pucara has a low wing with no taper or dihedral on the broad center section.

“普卡拉”的低单翼宽大平直，没有后掠角。

6. A wax taper was placed in his hand but his fingers would not bend, so it was placed between them and held up for him.

一个小蜡烛放在右手手指但不会重水因此它们之间,举起放在他。

7. Let's do an experiment: Two pupils, please. Please pour into a cylinder with a taper full of water. How many times can we fill up the cylinder?

下面我们来做一个实验。请两个同学上来演示,将圆锥装满水倒入圆柱,几次可以将圆柱装满?

8. The stainless steel seat ring is manufactured with a slight inside taper.

不锈钢阀座密封环制成内部锥度。

9. Our main products are taper roller bearing, spherical roller bearing and deep groove ball bearing.

主要生产圆锥滚子轴承、调心滚子轴承、深沟球轴承等。

10. Taper of bore in spindle center sleeve morse No.

主轴套内孔锥度。

11. Taper of hob arbor fitting Morse no.

主轴锥孔。

12. Taper of hole in spindle nose MT No.

主轴锥孔锥度。

13. The chamfered diamond like structure tapers from the centre towards the top and the bottom. The meandering structural mesh expresses the change of programs across the tower.

交织的菱形结构从大楼中间逐渐向顶部和底部延伸。富有创新性的蜿蜒变化的网状结构形成了整栋大楼的支撑体系。

14. A taper or acute protection tube made from stainless steel is on the front of the products.

产品前端配有锥形或锐角不锈钢保护管。

15. Today, we are going to discuss tapers.

今天我们学习圆锥体。

16. Hong Kong IPOs are now springing back from the slowest first half for six years, but flows could taper off before long.

今年上半年，香港股市的IPO跌至六年来的最低位。现在，这里的IPO正从这一低位强劲反弹，但其势头可能很快又会减弱。

17. The new structure of a taper pin connection with external thread is introduced.

介绍了一种外端带有螺纹的圆锥销联接的新型结构。

18. In this paper,we introduce the analysis and design of a new photoelectricity taper tester.

介绍了一种新研制的锥度检查仪,并就其测量不确定度进行了评定。

19. This paper produces a new way of grinding the hole of a helix flute Archimedes spiral hob: a bob is orientated in three tapers.

介绍了一种采用三圆推销定位磨削阿基米德螺线滚刀内孔的新方法，该方法避免了圆周齿距误差和螺旋槽导程误差的影响。

20. The control algorithms about DSU,Taper Head,Taper Tail are introduced to ensure flatness by maintaining steady rolling force.

介绍了采用动态设定DSU、Taper Head、Taper Tail控制算法以维持轧制力恒定来保证板形。

21. To introduce the structure characteristics of dismoumtable drawing die having taper fit.

介绍可拆卸式拉丝模具有锥形配合的结构特点;

22. Viewed from above or from the side, the head tapers uniformly to the tip of the nose.

从上面或从侧面观察，头部都是呈锥形（向鼻尖方向逐渐变细）。

23. On the sides it tapers gradually and smoothly from the ears to the end of the black nose, without being flared out in backskull (cheeky) or pinched in muzzle (snipy).

从侧面观察，从耳朵到黑色鼻 镜方向，头部逐渐变细，但后脑不向外扩张（厚脸皮），口吻也没有突然变窄的样子（象被截断的口吻）。

24. On the sides, it tapers gradually and smoothly from the ears to the nose, without being flared out in back skull (cheeky) or pinched in muzzle (snipey).

从侧面观察，从耳朵到黑色鼻镜方向，头部逐渐变细，但后脑不向外扩张（厚脸皮），口吻也没有突然变窄的样子（象被截断的口吻）。

25. Their tail, described best as an otter tail, is thick at the base and tapers to a narrower point.

他们的尾巴，被描述的最好作为水獭尾巴，是厚实的在基地和逐渐变得尖细对更加狭窄的点。

26. He glanced at his own white taper fingers, shuddering slightly in spite of himself.

他瞧瞧自己白而修长的手指，不由自主地微微打了个寒噤。

27. The following photos show the blade thickness and distal taper.

以下的是比较不同刀剑的刃厚及其变化。

28. But stubble lacks the finer taper of unshaven hair, giving the impression of coarseness.

但是，未刮净的汗毛茬会给人以粗糙的感觉。

29. Do you taper the tops and backs, are they thinner along the edge?

你会逐渐地打薄面板和背板,而在沿着外围的地方会打的更薄吗?

30. You would better taper off the amount of time given to rest .

你最好逐渐地减少休息时间。

31. Probe the kids to know the taper, hold its features and understand its plan.

使学生认识圆锥，掌握圆锥的特征，会看圆锥的平面图。

32. So the effects of self-fields should be considered in designing the Ubitron amplifier. Using wiggler taper, the efficiency is up to 12.3%.

使用摇摆器幅值渐变,器件工作效率从10.9%提高到12.3%。

33. Stop: stop rotating output shaft, cam rollers contact roller cam bearings taper ribbed support of the re-direct.

停止：出力轴停止旋转，凸轮滚子接触滚子轴承式凸轮锥度支撑肋的重直部分。

34. You can choose ball, bullnose, flat and a variety of taper cutters.

刀具除标准球、平、圆鼻刀外，亦可使用任意角度成形尖刀。

35. Graduation: laborer rotating, contact roller cam roller cam bearings taper ribbed support of the curve.

分度:出力轴旋转,凸轮滚子接触滚子轴承式凸轮锥度支撑肋的曲线部分。

36. Pulleys - Taper lock bushes - Chains Monobloc - Transmission belts Rubber sheets &carpets for...

分类标题：橡胶和塑料管及管道|皮带轮...

37. The foreface tapers from eye to muzzle with a perceptible stop.

前脸从眼睛向口吻方向呈锥形，止部清晰。

38. To shorten and taper(hair) by cutting and thinning.

剪短，剪薄剪成薄的以使（头发）变短变细、变薄

39. To shorten and taper (hair) by cutting and thinning.

剪短，剪薄：剪成薄的以使（头发）变短变细、变薄

40. Financial aid generally tapers off after the first year of college.

助学金在大学一年级以后就逐步减少。

41. Financial aids generally taper off after the first year of college.

助学金通常在大学一年级之后逐渐减少。

42. Genus of fungi whose fruiting body tapers toward a base consisting of spongy mycelium.

包括柔软的菌丝体的且它的果体锥度以它的基部为准的真菌的属。

43. The taper of elevators is usually slight, and the difference between the two values is generally small.

升降舵的根梢比通常较小，因而两个值之间的差别一般不大。

44. Museums often enjoy cheeringly high visitor numbers in the first year or two, but then attendance tends to taper off.

博物馆的访客量往往在第一、二年有较高的人数，随后便趋于逐年减少。

45. A single taper flickered in Ambreene's bedchamber as she shot the door bolt into place with steady hands.

卧室的门被牢牢的插上，一只小细蜡烛在里面闪动。

46. The kerf taper is approximately proportional to the traverse speed, but pressure and traverse speed have an inverse effect on it.

压力越大余纹角度越小，靶距对余纹角度影响不大，余纹曲线相互之间大体平行，且不规则；

47. PIPE FITTINGS WITH DOUBLE TAPER SLEEVES. COUPLING DIMENSIONS.

双锥套管道接头。连接尺寸。

48. The muzzle tapers little from base to nose and is rounded at the tip.

口吻从根部向鼻镜方向略呈锥形，尖端略圆。

49. Moreoer, infliximab use did not increase the proportion of patients who were able to taper their steroid dosages without relapse.

另外，使用英夫利昔单抗不会增加减少类固醇用量而不复发的患者比率。

50. It also requires a degree of skill to taper the dart to achieve a smoothly contoured garment.

同时还需要一定的技术水平来缝合省道从而获得一个平顺的成衣。

51. The stifles are moderately bent and taper smoothly into the hocks.

后膝关节角度恰当，向下逐渐地、平滑地变细，与飞节连接。

52. Drill Type Bit Diameter Buttons,mm Taper Water Hole Part No. mm in Guage Front Angle Button Bits Flat Face&nbs...

品牌: 三山 . 原产地: 中国 . 产品描述: 专业生产各种规格的重型釬具系列产品。

53. Well, the leg shall is taper all down the side seam.

喔，裤腿应该沿边缝逐渐收

54. How many heights has a taper?

圆锥有多少条高?

55. Taper A is taller than taper B. Measure its height from top down.

圆锥比圆锥高。从顶点向下量。

56. Taper roller bearigns are generally used to support combined load mainly consisting of radial load.

圆锥滚子轴承主要用以承受径向载荷为主的径向与轴向联合载荷。

57. They had red tapers on the table at Christmastime.

在圣诞节期间他们在桌子上点红色的细蜡烛。

58. Just as government spending tapers off, America is set to raise taxes sharply on high earners and investment income.

在政府支出逐渐减少的同时，美国已准备大幅提高高收入者和投资收益之税收。

59. Quick and simple clamping is achieved by using a friction taper that provides sufficient torque transmission.

在有足够的带动转矩时,采用摩擦圆锥体使夹紧快速又方便.

60. Amid these earthly damps What seem to us but sad, funeral tapers May be heaven's distant lamps. (Java for Programmers, by Douglas A.

在这阴冷的尘世中，留给我们的只是无尽的悲伤；灵堂前摇曳不定的烛光，仿佛是通往天堂的盏盏明灯。

61. Within the gear carrier unit, taper roller bearings are employed almost universally for carrying the input pinion.

在齿轮承运人股，圆锥滚子轴承受雇几乎普遍进行输入齿轮。

62. HIGH CAPACITY. Automotive hubs on taper roller bearings.

大承载量：小型滚轴轴承上的自动轮毂。

63. From a lofty hall the ceiling tapers down via a voluminous entrance and ends in a horizontally accented library.

天花板从高大的礼堂开始，经过宽敞的入口大厅，逐渐降低，终止于一个半地下的语音教室。

64. Without the misalignment, coupling efficiency increases with the decreasing of taper length.

失配不存在时，耦合效率随著锥长的增加而减小。

65. Beside Sister Perpetue, she was the taper beside the candle.

她在佩尔佩迪姆姆身旁，就好象牛脂烛旁的细蜡烛。

66. She put five tapers on the cake.

她在蛋糕上放了五只小蜡烛。

67. If the taper support ribbed surface and the cam cam rollers have not Sleek, will be for damage to the division.

如果锥度支撑肋的凸轮表面和凸轮滚子之间有不滑顺情况，则会损害到分割器。

68. And the shape of the vertebrae in women tapers off toward the back, creating a wedge shape that further facilitates arching, Whitcome said.

妇女身体里的椎骨呈椎形向后，形成一个楔形更容易搭成拱形。

69. The connected curve equation after spreading connected joint of taper container are derived, the new blanking method with computer is put forward.

导出了圆锥形容器接管交线在展开接管表面后的曲线方程，提出了用计算机绘制其交线，即放样下料的新方法。

70. A top part or point that tapers upward; a pinnacle.

尖塔、尖顶:向上逐渐变尖的顶端或顶点;小尖塔。

71. Other taper degree and bit diameter are available upon request by Customers.

尾孔锥度及大径可以根据用户具体情况制定。

72. Being thicker where it joins the body, the tail tapers to a point.

尾巴与身体结合处比较粗，末端变细。

73. The tail is thicker at the base, tapers to a point, and is feathered (covered and fringed with hair).

尾巴根部粗，向末端呈锥形，有饰毛（覆盖的毛发和边缘的毛发）。

74. Taper of Hole in Tailstock No.

尾座套筒锥孔。

75. Taper bore of tailstock barrel No.

尾座套筒锥孔锥度。

76. Is there any taper tap in the house?

工具房里有公锥吗?

77. Materials: 4 votive candles, 1 taper candle, a chalice with salt-water, a bowl of sand, a cone of sandalwood incense, matches.

工具：四只许愿蜡烛、一只细蜡烛、适量的盐水装在酒杯当中、一碗沙、一搓檀香料、火柴。

78. Compare these two tapers: Which is taller? How to measure its height?

师：比一比：（老师出示两个不同的圆锥）哪一个圆锥高？怎样测量圆锥的高？

79. Look at the computer. How many centimeters are there in your taper?

师：看电脑是怎样测量圆锥的高。量一量自己的圆锥的高是多少厘米。

80. Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings.

建筑物气体装置用手工操作球阀和死底锥形旋塞。