worktable

worktable

1. 2.Excellent uniformity of vibration on worktable with small lateral action.

2. 台面振动均匀度佳，且侧向运动小。

2. 3.Auto ink squeegeeing and flooding and worktable elevating;

3具有圆面及锥面印刷功能。

3. Worktable could be adjustable for forth/back move, easy and safe operation;

3工作台可手动前后移动，便于安全快速操作。

4. Auto ink scraping, flooding and worktable lifting for simple operation to ensure consistent quality;

4自动进行刮油、回油、工作台升降等，既简便了操作，又保证印刷质量的稳定。

5. Worktable can be adjusted up/down and left/right as well as turned slightly;

5印刷行程和速度可调，以满足不同的印刷要求。

6. Worktable auto moving into/out of stamping position to facilitate substrate loading/unloading;

6工作台前后左右可微调，还可调校角度。7烫印压力，温度，时间可调。

7. Convenient adjustment available on up/down, left/rightplane position of worktable; Stencil adjustment capable such as on forth/back, left/right, up/downeven on slope position;

7工作台可进行上下、平面摆角微调，网框可以前后、左右、上下及锥度微调，印刷精度高，调校方便、快捷。

8. Worktable can be adjustable up/down and rotated slightly.Screen frame can be adjusted forward/backward, left/right and rotated slightly;

7工作台可进行上下、平面摆角微调，网框可以前后、左右、上下微调，印刷精度高，调校方便、快捷。

9. x -y positioning worktable

x-y定位平台

10. XY worktable

XY工作台

11. A strong worktable is a definitive must.

一个坚固的工作台是必须的。

12. A Control Method of xy Worktable with Serial Port on Windows

一种Windows环境下使用串口控制xy工作台的方法

13. Development of an Abrasive Water Jet Test Worktable

一种磨料水射流试验工作台的研制

14. universal worktable

万能工作台

15. Stainless steel refrigerating cabinet with worktable

不锈钢工作台雪柜

16. And the pneumatic worktable supports large size glass operating.It's really easy and efficient to control for the user.

且工作台架利用气动升降，保障了大面积玻璃的操作方便，有简便快捷的功效。

17. Design of Two Worktable Milling and Drilling Special Machine to Motor Casing by NC Technique

两工位数控专用电机壳铣钻床研制

18. To do this, the Database Engine must create a worktable to store intermediate results.

为此,数据库引擎必须创建一个工作表来存储中间结果。

19. Distance from spindle nose to worktable surface

主轴端至工作台面距离

20. Distance from spindle nose to base worktable surface

主轴端至底座工作台面距离

21. Distance between spindlee nose and worktable mm

主轴端面到工作台距离

22. Max. Distance of Spindle Nose to Worktable

主轴端面至工作台最大距离

23. Min. Distance of Spindle Nose to Worktable

主轴端面至工作台最小距离

24. Distance from the spindle max to the worktable: min

主轴至工作台面的距离:最大

25. HBV Contaminated Blood Worktable Surface: Investigation and Analysis

乙型肝炎病毒污染血液操作台面的调查分析

26. Device for deceleration and anti-backlash of large size CNC machine worktable and its installation method are introduced,as well as the countermeasure of worktable creep is obtained.

介绍了一种大型数控机床工作台减速消隙装置及其装拆要点,找到了工作台爬行的应对措施。

27. Introduces examining the parallel scale method of wood processing planer fore - aft worktable surface with horizontal instrument.

介绍用水平仪检测木工平刨床前后工作台面平行度的方法。

28. Moving between the worktable and the dresser, he worked with the ease of long familiarity

他往返于工作台案和放置烹就菜肴的桌子之间，工作起来因熟而巧。

29. The dentist did not return the smile.He brought the basin of sterilized instruments to the worktable and took them out of the water with a pair of cold tweezers, still without hurrying.

他端来了那个装着已消毒器械的盆子放到工作台上，用冷镊子把器械从水中夹出来，依旧不慌不忙。

30. Since equivalent moment of inertia of both the hob-spindle and the worktable are very small, rotating vibration caused by load torque fluctuation becomes large.

但是刀具轴或工件轴的等效转动惯量极小，使得负载转矩波动引起的回转振动很大。

31. Research on Two-dimentional Worktable Moving Characteristics on a Low Cost RP Machine

低成本快速成型机二维工作台运动特性研究

32. The customers can choose not only the combination of multiunit but also the single machine of lifting worktable.

依用户需要可提供多架组合的砂光配置，用户亦可选配工作台升降式的单机工作机型。

33. Keywords Grating scale Ball bar meter High precision NC worktable Error analysis;

光栅尺;球杆仪;高精度数控工作台;误差分析;

34. The intestine closed loop imported two magnetostrictive displacement transducers as peen and worktable displacement feedback to control the forging volume in real time.

内闭环引入磁致伸缩位移传感器检测锻压机锤头和工作台的位移，实时控制锻压量。

35. Keywords cleansing worktable;bacilus;epiphte;gas sol;

净化工作台;细菌;真菌;气溶胶;

36. Because of the exactitude of the polynomial interpolating in the interpolation node, the data of the worktable corresponds with target data, and this thesis accomplishes the processing of data.

利用多项式插值在插值节点处求解的精确性，使联动台数据与目标数据映射，最终实现了联动台数据处理。

37. Keywords Single Chip Microprocessor;Numerical Control System;Worktable;

单片机;数控系统;工作台;

38. After edge sealing in photosensitive seal machine, user shall fill certain ink in the shell of seal and set up the shell and place it stable on a level worktable.

印壳内胆放入封边机内封边后，将定量印油注入印壳的储油仓内。将章壳组装好，水平放置在工作台上。

39. DISPLACEMENT COMPOUNDING CONTROL OF PIEZOELECTRIC MICRO-MOTION WORKTABLE

压电微动工作台的位移复合控制

40. Study on Piezoelectric Ceramic Self-sensing Actuators and the Control Method of Micro-motion Worktable Driven by It

压电陶瓷自感知执行器及其驱动微动工作台控制方法的研究

41. BRUSH AND BALL WORKTABLE: The worktable with brush and ball is wide enough to reduce the noise and vibration when the machine is running, and protect the plates from getting scratched.

厚转塔结构：麦斯铁伺服液压数控转塔冲床标准装备有16或32个长模具工位，含1或者2个自动控制旋转角度工位。

42. Put out the hand skiving machine, and fix it on a worktable.

取出剥胶机机架，然后把它固定在工作台上。

43. Spay and cutting device, various automatic loading device , cleaning worktable and special fixture can be chosen.

可选配:喷雾切削装置、各种自动上料装置、清洗台、各种专用夹具等。

44. Development of a dynamical load testing worktable for porous bearing

含油轴承动态负载摩擦学性能测试装置

45. Development of a Testing Worktable for Testing the Tribology Performance and Working Capability of Porous Bearing

含油轴承摩擦学性能测试台的研制

46. circling worktable

回转工作台

47. Since equivalent moment of inertia of both the hob-spindle and the worktable are very small,rotating vibration caused by load torque fluctuation becomes large.

在伺服机构中设计一种可调式惯性阻尼器,直接附加在电机转轴上,惯性阻尼器的阻尼系数可以通过惯性轮和电机轴之间的间隙来调整。

48. By appending a support board at thebottom of top plate in worktable, the whole rigidity is improved.

在工作台上板的下端增加了支撑板，使整体刚度得到了提高。

49. In planing, the workpiece is attached to a worktable that reciprocates past the cutting tool.

在牛头刨削操作中,工件被固定在一个沿着刀具作往复运动的工作台上。

50. Design of Control System for Robot Worktable Based on PLC

基于PLC的机器人工作台控制系统设计

51. Friction Identification and Compensation in an AC Servo Worktable Based on Torsion Measuring

基于力矩测量的交流伺服工作台摩擦识别与补偿控制

52. Stick-slip Control of AC Servo Worktable Based on Friction Compensation

基于摩擦补偿的交流伺服工作台爬行控制

53. Worktable Precision Adjustment Based on Error Analysis of Ballbar Transducer and Linear Grating Sensor

基于球杆仪和光栅尺的工作台精度调整

54. multi-degrees-of-freedom worktable

多轴工作台

55. Research on movement error separating and compensating technology in the installation and trial run of large turning worktable

大型回转工作台安装调试中的误差分离与补偿技术的研究

56. worktable for overprint

套印工作台

57. She plodded in her perpetuating circle of stove, worktable and sink as if nothing else existed.

她只是在炉子、工作台和水井这个永恒的小天地里辛勤地劳动，好象其余的一切都不存在似的。

58. If this worktable requires creating any rows that exceed the limit of 8,060 bytes, the query returns an error.

如果此工作表需要创建的任何行超过了8,060个字节的限制,则查询会返回一个错误。

59. The pleasantest room in the house was set apart for Beth, and in it was gathered everything that she most loved, flowers, pictures, her piano, the little worktable, and the beloved pussies.

家里最舒适的屋子被腾出来给贝思，她最喜欢的东西都集中到那间屋子里---花朵、图画、她的钢琴、小工作桌以及得宠的猫咪们。

60. Wide Worktable

宽平台

61. 6. The airproof device under the worktable has wonderful crumbs-clearing effect.

工作台下具有锯片密封装置，排屑效果好。

62. worktable displacement

工作台位移

63. Worktable Press -keeping System

工作台保压系统

64. Worktable moves lengthwise automatically. It is good for safe and quick operation;

工作台可自动前后移动，便于安全快速操作。

65. Worktable can be adjusted forward/backward, left/right and rotated slightly.Screen frame can be finely adjusted up/down.Printing is high and adjustment easy.

工作台可进行上下、左右、前后及平面内角度的微调，网框可上下微调,调校方便、快捷。

66. Worktable can be adjusted up/down, left/right and rotated slightly.Printing precision is high and adjustment easy.

工作台可进行上下、左右、前后及平面摆角微调，网框可以前后微调,调校方便、快捷。

67. Worktable gyration adopts transducer infinitely variable speeds;the precision of speed regulation is high.

工作台回转采用变频器无级调速，调速精度高。

68. The Static Pressure Renovation for the Guide Rail of the Worktable

工作台导轨静压改造

69. The worktable drives the workpiece to-and-fro linear movement, the workpiece is polished by rotary polishing wheel, the surface of the wheel with polishing wax or other materials.

工作台带动工件做往返直线运动,通过抛光主电机旋转带动抛光轮进行工件抛光,布轮表面使用抛光蜡或抛光剂作为抛光介质。

70. worktable rotation

工作台旋转

71. worktable traverse

工作台横动

72. Transverse feed range of worktable

工作台横向机动进给量范围

73. Height From Worktable To Ground

工作台离地面高度

74. heavy-rigidity gear hobbing machine with movable worktable

工作台移动式高刚度滚齿机

75. Longitudinal feed range of worktable

工作台纵向机动进给量范围

76. The vertical travel of worktable

工作台纵向行程

77. A strong worktable, such as one used in carpentry or in a laboratory.

工作台结实的工作台，如用于做木工或做实验的

78. Worktable can move up/down and lengthwise simultaneously so that substrate installation is easy and quick.

工作台自动升降的同时,也自动前后移动,安装工件非常方便快捷。

79. Worktable Design

工作台设计

80. A safety inter lock device is provided for the worktable motivation handle to ensure safe loading &unloading and measuring.

工作台起动手把设有安全联锁装置，确保装卸和测量工件时的安全性。